Window Valance Size Chart
| For windows measuring | You will need |
| Up to 29 inches wide | 1 Valance |
| 30 inches - 39 inches | 2 Valances |
| 40 inches - 48 inches | 2 - 3 Valances |
| 49 inches - 72 inches | 3 - 4 Valances |
What size is a standard valance?
What are the different types of valances?
- Rod Pocket. Rod pocket valances are the most popular, common, and least expensive style.
- Swag. Swag valances will give your room a decidedly formal look and are available in a variety of designs.
- Ascot.
- Roll-Up.
- Scalloped.
- Scarf.
- Balloon.
How to measure for a valance?
VALANCE MEASURING INSTRUCTIONS Measure the width: Valance width is usually determined by the inside width required to accommodate what-ever the valance is to be mounted over, plus whatever is required for operating or bracket clearance. When determining the width, measure the window or undertreatment the valance will be mounted ...
How to measure for valances?
- Find the center of your center pleat. Mark with pin.
- Measure 23.5″ from the right side of the toile section to center of valance.
- Fold right toile section at the 23.5″ wide to begin center pleat. 12″ was allowed for the center pleat.
- Repeat with left side toile section.
What is the standard size of a window valance?
Obviously, when going the custom route, there is no such thing as a standard valance size. But generally speaking, a valance should end up hanging about half an inchto 2 inchesbeyond each side of the window in its final form. So, a 40-inchwindow should be covered by 41 to 44 inchesof the valance above it.
What is the average length of a valance?
It depends on the style of the valance, as well as how it's installed and how high the ceiling is. Outside-mounted valances usually have an average drop length of 17 to 21 inches if hung on walls with 8-foot ceilings, and that length gets proportionately longer as the ceiling gets taller.
How long should a valance be for a 36 inch window?
To determine the width of a valance for a 36-inch window, the Window Treatment Expert website suggests adding 2 to 4 inches on each side, adding less for narrower windows and more for wider windows. For a 36-inch window, this measurement would provide you with a valance that has a width of 40 to 44 inches.
What widths do valances come in?
A shaped valance drop ranging from 10 to 15 inches matches with up to a 72-inch curtain drop; a 12- to 18-inch valance drop with a 72-inch to 90-inch curtain drop; and a 14-inch to 21-inch valance with a 90-inch and longer curtain drop.
What is the standard depth of a valance?
Another rule of thumb used by decorators is that the window valance depth should be 1/4 of the overall window height, plus 1 inch. A 60-inch tall window, then, would call for a 16-inch deep valance, while a 48-inch window calls for a valance about 13 inches deep.
How far should a valance hang?
For most windows, a valance should cover about 2 to 6 inches of the top of the window and window frame (this is called the window overlap), with the rest of the valance covering the wall above the window. If there is not enough room to do this, then the valance should be hung immediately under the ceiling.
How do I measure for a window valance?
0:181:25How to Measure your Window for Pole Mounted Valances - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply measure the window opening width including your window molding on each side we recommendMoreSimply measure the window opening width including your window molding on each side we recommend adding four inches to that measurement. This is the number you will give us for width.
How much fabric is needed for a window valance?
The obvious answer is that it depends, but you should expect to need somewhere between 1-1/2 to 5 yards of face fabric for a standard 36- to 40-inch window. For double-wide windows (about 70 to 80 inches wide), about 2-1/2 to 8 yards of face fabric is a realistic estimate.
How do you make a simple valance?
0:188:10How to Sew a Valance with Ruffled Top - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou cut the fabric to the desired size and then you start sewing cut the fabric to the required sizeMoreYou cut the fabric to the desired size and then you start sewing cut the fabric to the required size you may have to cut more than one piece to get your desired width.
How do you hang a valance over blinds?
0:112:54How To Attach Window Valance Without Clips | Blinds DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo normally your valance is going to come with plastic or metal clips. They're going to connect toMoreSo normally your valance is going to come with plastic or metal clips. They're going to connect to your head rail here and then they would maybe slide in to your product there.
How wide should a valance be for a 50 inch window?
So, a 50-inch wide valance realistically will cover a width of only about 20 to 25 inches.
What size curtains do I need for a 48 inch window?
Curtain Width Guide If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.
What is the return on a valance?
A valance return is the side pieces added to a standard valance. With a standard inside mount blind the valance is cut to fit within the window frame and is one piece of molding.
How to determine valance size?
The first step in determining valance size is to carefully measure the window that will be treated with a valance. The valance size will always need to be at least somewhat wider than the window. Depending on where the hardware is located, the valance may also need to be wider than the window frame. A valance is often used to hide the rods, ...
How long is a valance?
If you want to go with a standard size, a typical valance is about 14 inches (or 36 centimeters) long from the lower edge of the rod to the bottom of the hem. If you plan to make your own treatment, you need ...
How to measure curtain rod width?
The return is the length of space between the wall and the face of the curtain rod. You will need to measure one side then multiply it by two and add it to the width of the rod face to determine the appropriate valance size.
What is a valance used for?
A valance is often used to hide the rods, brackets, or other hardware so you will want one large enough to cover these and allow plenty of space between the piece and the hardware . For gathers, you will need to add a good deal more width when configuring valance size.
How much fabric do you need to make a ruffle?
Add this number to your total. If you want to add a ruffle at the top, you will need to add twice the height you want the ruffle to be. A one inch (or 2. 54 centimeter) ruffle will require two inches (or 5.08 centimeters) of fabric.
Do you need to cover a valance with fabric?
For a fabric valance, you will need enough material to cover the total width including both return measurements and leave room for a seam.
What does a valance look like?
A valance that is too shallow for the window will look skimpy and understated, while one that is too deep will look top-heavy or will cut off too much of the window, interfering with the view and obstructing too much light.
How deep should a window valance be?
Some designers suggest that a valance should be "about 15 inches deep," but will adjust that measurement in either direction for windows that are smaller or larger than the norm.
Why are valances used in window treatments?
Common since the Rennaissance and reaching their high point in Victorian England, valances are still a common feature in window treatments today. They can serve both a practical function by hiding curtain bars and other hardware, but valances are mostly a design feature that serves to add color, texture, and pattern to a window.
What is a shorter valance?
A shorter valance complements a shorter panel; a longer valance complements a longer panel. The header style and the valance shape are other factors that can affect the drop length.
How much does a straight valance drop?
Match a 12-inch valance drop with up to a 72-inch curtain drop; a 15-inch valance with a 72- to 90-inch curtain drop; and an 18-inch valance with a 90-inch and longer curtain drop.
How wide are valances?
Take a look at these examples and notice how they cover the sides of the window just enough to frame the window. All these valances are only about 1-1/2 to 2 inches wider than the actual window.
What does "valance width" mean?
It means the workroom that made the valance for you didn’t skimp on fabric.) For balloon, London and relaxed Roman valance styles, you want the width to be determined by the way that the valance falls at the bottom. The bottom hem of the valance should sit on the window frame and barely cover it.
How wide is a double window?
Each window is barely 40 inches wide, yet the window treatments span 60 inches across or more. Each of the two draperies here is a double width (100 inches wide when spanned out), for a total width of about 200 inches for the pair.
How much wider should a valance be than a window?
So, how much wider should a valance be than the window then? Most valances should only be 1-1/2 to 5 inches wider than the window if the valance hangs by itself or over a Roman shade. It should be 10 to 30 inches wider than the window if it’s hung over a pair of custom drapes.
Why are valances narrow at the bottom?
These are usually London, balloon, or relaxed Roman valances. The reason they get more narrow at the bottom is because of the weight of the fabric. (This is actually a sign of a good quality valance.
What is a box style valance?
No matter what you call it, the idea here is that this valance continues to go around the curtain rod on each side. It makes the valance look attractive when viewed from the side and gives it that boxed, finished look. In simple terms, it means that this valance has a return on each side.
Can a valance be board mounted?
You may see it sometimes referred to as a clearance also. These valances can either be board-mounted, or they can be mounted on a continental rod as a rod pocket valance. You’d follow the same rules from above for a valance like this, making sure to add the returns to the overall width.
