Toilet dimensions overview:
- Height (top of tank): 29″ to 31″
- Width (tank is usually the widest): 14″ to 16″
- Height to seat: 16″ to 17″
- Depth: 28″ to 32″
What are the standard dimensions of a toilet?
What is the Minimum Size for a Toilet Room?
- Distance from Toilet Centerline to Nearest Obstruction. According to building code requirements, homeowners need to maintain at least 15 inches of space between a toilet and the nearest obstruction.
- Distance from Edge of Toilet to Wall. ...
- Space in Front of the Toilet. ...
- Toilet Paper Holder Location. ...
Are toilet tanks universal fit?
When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model. When looking to purchase a new tank, you need to learn the measurements and model number.
Are all toilet gaskets the same size?
Toilet traps are not the same size. They range in size from 1 3/4″ for some older toilets, which is large enough for most household needs, to over 4″ in hospital toilets, allowing the disposal of larger waste products. This answer is rather broad, I know, but covers the scope of the question.
How to measure for a replacement toilet?
Measurement for a Toilet From a Wall
- Toilet Measurements and Depth. Toilets have many standard measurements, including height, width and depth or length. ...
- Toilet Position from the Wall. While the toilet itself does not have to be positioned any set distance from the wall, enough room behind the base of the toilet for ...
- Drain Centerlines. ...
- Measuring Existing Drains. ...
Are all toilet tanks standard size?
Tanks come in a few different sizes, and one of them is small. Small tanks vary in size; however, one standard length is 15 1/8 inches. It is common to see these tanks on toilets with bowls and seats of a similar size.
How do I know if my toilet is 10 or 12?
If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 11.5 and 12.5 inches, it is a 12-inch rough-in.
How many Litres is a toilet tank?
Single-flush toilets have just a single flush volume option. Some models flush with as little as 0.8 gallons (3.0 litres), and some flush with as much as 1.6 gallons (6.0 litres). Models certified to WaterSense flush with no more than 1.28 gallons (4.8 litres).
How do you measure toilet tank size?
A toilet tank's height is measured from the floor to the top of the toilet tank. Place the end of the tape measure on the floor, and take the measurement at the very top edge of the tank lid. Toilet bowls and seats are either round or oval.27-Oct-2020
Can I replace round toilet with elongated?
Yes and Make the rough in distance from the back wall 13–1/2 inches and 16- 1/2 inches high toilet from the floor. and place it 1ft 6 inches from any side wall.. That will be perfect and then you can enjoy it.
Can you replace a 14 inch rough in toilet with a 12-inch rough in toilet?
You can, but the back of the toilet tank will be two inches further away from the wall. The “rough-in” dimension refers to the distance from the wall framing (½-⅝″ behind the finished wall surface) to the center of the sewer pipe on the floor. Standard rough-in is 12 inches.
Can I manually fill toilet tank?
Fortunately, flushing your toilet is easier than you may think. Simply fill the toilet tank with water until it reaches the top of the overflow tube. ... The pressure created from dumping the water will force a strong flush. Remember, this method doesn't require you to use the toilet's handle.12-Dec-2019
How many liters is a flush?
In a home with older toilets, an average flush uses 3.6 gallons (13.6 liters) and the daily use is 18.8 gallons (71.2 liters) per person per day. In a home with ultra-low-flow toilets, the daily use is 9.1 gallons per person per day.
How many litres do you need to flush a toilet?
choosing a water-saving, low-flush or dual-flush version when buying a new toilet - low flush toilets use six litres of water per flush compared to nine or more litres for other toilets. fitting a variable flushing device to existing higher flush toilets - this will give you a choice of flush volumes to help save water.
Does toilet tank size matter?
When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model.
How do I know what size toilet to buy?
To measure the bowl shape, you can start by putting your measuring tape at the back of the toilet, and extend the tape forward to the end of the bowl, measuring parallel to the floor. The most important measurement you can take for a replacement toilet is the rough-in dimension.
What is the difference between a 10-inch and 12-inch rough-in toilet?
Considerations. When a toilet with a 10-inch rough-in is placed in a 12-inch rough-in space there will be 2 inches of open space between the tank and wall. ... However, the extra inches will cause the tank to be further away from the shutoff valve on the wall, so a longer connector may be needed to reach effectively.
What are the Dimensions of a Standard Toilet?
Standard toilet sizes are usually between 27 to 30 inches deep ; that is 69 to 76 cm, about 20 inche s in width, i.e., 51 cm, between 27 to 32 inches in height (68.5 cm to 81 cm), and features a rough-in of anywhere from 10-12”. You won’t want to have a large toilet in a tiny bathroom, so the dimensions of your toilet are important.
How wide should a toilet be?
Toilet Breadth. Start from the left corner to the right corner of the toilet rim (the widest parts of the rim). Your toilet needs to have a minimum space of 30 inches regardless of its location within your bathhouse.
How much space do you need to put in front of a toilet?
Start from the front of the toilet bowl to the end of your tank. It’s recommended that you leave a minimum space of 24 inches in front of the toilet. This guarantees that there will be enough space to walk around in front of your toilet and that your bathroom door wouldn’t keep hitting the toilet, assuming the toilet is situated beside the door.
How far should a toilet seat be from the floor?
To be ADA compliant, the distance from the floor to the peak of the toilet seat should be between 17”-19”. This is about 43.1-48.3 cm. Note that this distance is measured to the top of the toilet seat and not to the rim of the toilet bowl. Until recent times, standard toilets were about 15 inches long, that’s about 38.1 cm. This was a few inches shorter than ADA accessibility requirements.
What are toilets made of?
Toilets are one of the most common fixtures found in every bathroom. Toilet parts are typically made up of a toilet bowl, a tank, a seat, and a seat cover. Over the years, the world has seen many toilet brands and several types of toilets, starting from pit latrines, chemical toilets to today’s more sophisticated water cisterns and smart toilets.
How wide is a Toto Aimes toilet?
Some model like the TOTO Aimes One-Piece Toilet has a product with roughly 16″ in width and 28.5″ in depth. Its tank height is 28″ and the seat is 17″ high.
What is the rough in of a toilet?
The rough-in measurement of a toilet describes the distance from the back wall to the middle of the drainpipe at the bottom of a standard toilet. The rough-in measurement of a regular toilet design is usually 12 inches, which is 30.5 cm.
How big is a toilet tank?
Large toilet tanks range in size as well but typically measure from 16 3/4 inches to 18 inches wide. The additional length adds capacity to the tank, however, the actual amount of water the tank holds depends on where the user sets the float ball.
How to measure length of toilet tank?
The length of the toilet tank, from one side across to the other, is measured from the edge of the toilet tank lid in most cases, unless noted by the manufacturer. Or, if your tank does not include a lid, the dimensions indicate the length from the side wall of the tank to the sidewall of the tank and do not include the lid.
How to fit a toilet into a tight space?
If you need to fit the toilet into a tight space along a wall, you have to know the tank length to fit the toilet between two items such as the cabinet and bathtub or the cabinet and wall. If you plan on squeezing the toilet into a corner, knowing this dimension tells you how much space on the other side you have for additional items.
How much does a lid add to a tank?
A lid may add an additional 1 or 2 inches, depending on the thickness of the lid sidewalls and its design. For instance, if the lid fits over the sides of the tank, it adds additional length to the tank. If the lid mounts flush to the tank, it does not add length. Advertisement.
How long is a small tank?
Small Tank Lengths. Tanks come in a few different sizes, and one of them is small. Small tanks vary in size; however, one standard length is 15 1/8 inches. It is common to see these tanks on toilets with bowls and seats of a similar size. When the toilet bowl and seat are the same width, it is easy to plan your installation because you only have ...
Do you have to account for toilet seat width and tank length separately?
When the toilet bowl and seat are the same width, it is easy to plan your installation because you only have to consider one measurement. You do not have to account for the seat width and tank length separately.
Does tank length affect flushing?
So, while tank length increases the overall maximum amount of water it will hold, it does not determine the amount of water used during a flush. Steve Smith has published articles on a wide range of topics including cars, travel, lifestyle, business, golf, weddings and careers.
How deep is a standard toilet?
Standard toilet dimensions are typically between 28–30" deep, roughly 20" wide, between 27–32" high, and have a rough-in between 10–14". Now you can find the perfect toilet.
How much space do you need for a toilet?
Measure from the front of the toilet rim to the back of the toilet. We recommend having at least 24" of space in front of a toilet. This ensures you will still have plenty of room to move around in front of your toilet and that your bathroom or shower door will not hit it if the toilet is placed near the door.
How to measure the height of a toilet?
Toilet Height. Measure from the floor to the top of your toilet seat. Then measure from the floor to the top of your toilet’s tank to make sure your new toilet can fit into the same space or under any an over-the-toilet storage racks that you do not want to get rid of.
What is the most important thing to know when looking for a new toilet?
One of the most important aspects in searching for a new toilet is its size and dimensions. Read our guide to learn more about the features that impact standard toilet dimensions, how to measure a toilet, and how to use this information to ensure a smooth installation and bathroom layout.
How high is a chair in a toilet?
Chair: Typically 17-19" off the ground, chair-height toilets offer additional comfort and are an ideal choice for those with restricted mobility.
How to measure seat height?
Seat height is measured from the floor to the top of your toilet seat. When choosing a seat height, consider your height and physical needs. There are two types of seat heights: standard and chair.
How tall is a standard toilet?
The distance measured to the top of the toilet seat, not the bowl height, must be between 17”-19” (43.1-48.3 cm) to be ADA compliant. Before recently, most standard toilets were manufactured to be 15” (38.1 cm) in height which does not meet accessibility requirements.
How big is a toilet?
How big is a typical toilet? Toilets are designed and manufactured in a range of sizes and styles with typical depths between 27”-30” (69-76 cm), widths around 20” (51 cm), and back heights from 21”-31” (53-79 cm).
What is a TOTO Aquia toilet?
The TOTO Aquia Wall-Hung Toilet is a modern round-shaped toilet fixture that is wall-mounted to take up less floor space. Combining simple round curves with wall-mounted installation, wall hung round toilets make bathrooms feel more and make them easier to clean.
What is a one piece toilet?
The TOTO Aimes One-Piece Toilet (Washlet) is a sleek contemporary toilet fixture with curves and forms designed to compliment a modern bathroom aesthetic. Going beyond other one-piece toilet systems, one-piece modern toilets are uniquely sculpted fixtures that seamlessly transform innovative and efficient toilet technologies into beautiful new bathroom objects.
How wide is a Toto Carlyle 2?
The TOTO Carlyle II One-Piece Toilet (Washlet) has a depth of 28.25” (71.9 cm), width of 16.5” (41.9 cm), tank height at 28.75” (72.9 cm), and seat height at 16.13” (41 cm).
How wide is a TOTO Vespin 2 piece toilet?
The TOTO Vespin II Two-Piece Toilet (Washlet) has a depth of 28.5” (72.4 cm), width of 15” (38.2 cm), tank height at 30” (76.1 cm), and seat height at 16.13” (41 cm).
What is a toilet bowl made of?
Toilet bowls are typically made of ceramic (porcelain) but other disposal designs may be made from concrete, plastic or wood.
What size bolts are used for toilets?
Similar sized toilets may share bolt and hole sizes while a custom toilet may use unique sizes. But usually, the size of a bolt is 1/4th inch, and the 5/16th size is also common.
When looking to purchase a new toilet tank, do you need to learn the measurements and model number?
When looking to purchase a new tank, you need to learn the measurements and model number. This helps you to find the correct replacement toilet tank.
What is the flushing system for a toilet?
Toilets come with one of three flushing systems; dual flush, gravity, and pressure-assisted. Generally, toilet tank sizes are universal within these flushing system categories, unless you have a custom toilet. Further on in this article, you will find information to help you find, purchase, and install a new toilet tank ...
What is a gravity toilet?
Gravity toilets are probably the model of toilet that is most frequently used in homes today, so there’s a pretty good chance that this is the type toilet you have. Gravity toilets flush by using gravity (hence the name) to facilitate the movement of water from the bowl into the sewage system. 3.
How to tell what size bolt hole is in a tank?
When you go to take measurements of the tank, look at the bolts. If they are not too eroded, you’ll be able to read the size right off the markings on the bolts.
Where is the flushing mechanism on a toilet?
In this type of toilet, the flushing mechanism is found on the top of the tank in the form of two buttons. These control how much water is used to flush the toilet.
Where to find toilet brand?
First thing you need to do is figure out what brand of toilet you have. You can find this either inside the lid of the tank, or down right behind the bowl like below:
Toilet Rough-In Measurements and Standards
Make sure the toilet dimensions will fit your space. Start by measuring the rough-in size. This is the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor. It’s best to perform this measurement before you remove the old toilet.
Toilet Models: One Piece or Two?
Toilets are made in one- or two-piece models. Most toilets are two piece, meaning that the bowl is bolted to the tank. Two-piece toilets are generally less expensive than a one piece. Both function comparably, though a one-piece toilet may be easier to clean.
Toilet Bowls
Toilet bowls are available in round and elongated (oval) shapes. Elongated bowls are usually 2 inches longer than round bowls and offer additional comfort. Round bowls are generally less expensive and work well in small spaces. As with rough-in standards, make sure your space will accommodate an elongated bowl before you shop.
Toilet Tanks and Flushing Systems
Almost all toilets have a similar tank capacity. When choosing a tank, you'll have to consider the size of the flush valve and the positioning of the flush lever as well as the flushing system.
Toilet Seats
Most toilets come in separate pieces and don't include the seat. Choose a seat that complements the color of the toilet and the décor of your bathroom. Think about the following items when choosing your seat:
Toilets and Water Usage
By federal law, new toilets can’t use more than 1.6 gallons of water per flush (GPF). High-efficiency toilets (HET) use even less.
How wide is a standard toilet?
Make sure that when you’re planning your toilet room, you keep the toilet in mind. The standard toilet is 130 centimeters long and 70 centimeters wide – about 51 inches by 25 inches. Failing to accommodate this space will end up in a toilet room that no one can properly use!
What does it mean to have less room in a toilet?
Using less room for your toilet room means having more for storage and utility. The cons are rather obvious – the toilet room is as small as it can legally be. This size can make changing codes a bit bothersome, as you may have to expand. A lack of internal storage is troublesome at times, and redesigning can be difficult.
How many inches is a standard wheelchair?
When looking at increased comfort and accessibility, a more significant standard exists at 36 inches by 66 inches. This additional half-foot on each side can help things feel less cramped and provide better access for the disabled.
How to save room in a toilet?
Storage space will also be at a minimum. You can save room by doing away with a sink and placing one outside instead. This toilet room size will function as you need it to, but the function will seem to be all that you did correctly.
Can a small sink fit in a room?
A small sink can fit in some models, though this can make things feel more pushed together.
Does a toilet take up space?
Toilet takes up less space, allowing more to fit into the room.
What size is a standard toilet?
Toilet Sizes . . . Most common standard toilets are generally considered to be either “2-inch or 3-inch” by naming convention. This refers to the INSIDE pipe diameter within the toilet and down through the floor drain.
How to tell what size toilet you need?
Note that in most cases, the toilet size can be determined by measuring the lip of the flapper valve base. If the flapper lip is roughly 1 7/8″ to 2 3/8″ in diameter, that indicates a 2-inch toilet. If it is more in the 3″ range, that is most likely a 3-inch toilet. See our illustration of measuring the flapper valve base lip over on the Products > Help Me Choose tab.
What does it mean when a toilet is bigger?
Since the toilet size refers to the inside pipe diameter, this means the drain hole cut-out inside the tank will naturally be larger. How much larger depends on the initial hole cut-out and the after-cure tolerance of the ceramic or plastic composite during manufacturing.
What size hole do you need for a flush actuator?
The flush actuator mount hole can be a little tricky sometimes because there are two commons sizes, 5/8″ and 3/4″ square , which will also vary a little due to the same manufacturing tolerances. Most flush actuators, whether lever handle or push button, will have a removable rubber collar that will accommodate both sizes. All of our kits have this collar arrangement unless otherwise specified. In extreme cases where the hole is a little smaller than 5/8″, the plastic shoulder of the flush mechanism may need to be sanded or filed slightly. Then on the other extreme, where the hole is slightly larger than 3/4″, the rubber collar may need to be shimmed with tape or other suitable material to enlarge it further for a tight fit.
What is the Standard Size for a Toilet Room?
There isn’t necessarily a standard set of dimensions for toilet rooms. Some homeowners prefer a larger toilet room that offers more comfortable functionality. If that’s important to you, then your toilet room could end up being as large as a small bathroom.
How much space do you need for a toilet?
At a minimum, you need to have at least 15 inches of space from the centerline of the toilet to the nearest cabinet or wall.
Why do people use toilet rooms?
Additionally, toilet rooms allow you to keep your master and other bathrooms private if you choose to do so.
How much space do you need between a toilet and the nearest obstruction?
Distance from Toilet Centerline to Nearest Obstruction. According to building code requirements, homeowners need to maintain at least 15 inches of space between a toilet and the nearest obstruction. That obstruction could be a wall, a cabinet, or another fixture that you want to install.
How much space do you need between a toilet and a wall?
You also need to make sure that there are at least 4 inches of space between the far edge of your toilet and the wall. This means that you need at least 30 inches of space to accommodate a toilet without violating the building code requirements.
What is a water closet?
When you see it, don’t worry. The term water closet means the exact same thing as a toilet room. You should just consider the terms interchangeable as you continue your research.
Where is the macerating toilet located?
A macerating toilet will send waste to a macerating unit, which is located behind the toilet on a wall. This liquefies the waste, allowing it to be sent out of a normal pipe that can be connected to your home’s main drain line.
