What are the dimensions of a standard double sink?
Kitchen Sink Dimensions
- Standard Sink. Most commercial kitchen sinks with a single bowl will be one of two standard sizes; these are 33 inches in length and 36 inches in length.
- Average Single Sink Dimensions. ...
- Average Double Sink Dimensions. ...
- Oversized Sinks. ...
- Compact Sinks. ...
What size is a double bathroom sink?
The vanities usually start at a minimum of 60 inches wide and can go to 84 inches at the extreme. Average double sink: The average sink size for this style is usually round or circular with an average measurement of 19 inches by 19 inches with a standard height of 8 inches.
What is the best double bowl kitchen sink?
- BEST OVERALL: Ruvati 32-inch Low-Divide Undermount Double Stainless
- BEST BANG FOR THE BUCK: Kraus KWF210-33 Kore Workstation Farmhouse Single
- BEST GRANITE COMPOSITE: Kraus KGF1-33 White Bellucci Granite Quartz Composite
- BEST CAST IRON: KOHLER Brookfield Drop-In Cast Iron Double Bowl
- BEST COPPER: SINKOLOGY Adams Farmhouse/Apron-Front Copper Single
Are all kitchen sinks a standard size?
The average kitchen sink measures 22-by-30 inches. While the front-to-back dimensions of the sink remain standard due to the size of most countertops and cabinets, the width of different types of...
How big is a double bowl sink?
Although this sink comes readily available in many sizes due to its convenience for house owners, the standard size of a double bowl sink is 33 inches in length, 22 inches in width and 8 inches in depth.
How wide is a kitchen sink?
The most commonly installed kitchen sink size measures 30 inches wide, which gives a variety of choices when it comes to shapes, such as single bowl orca/square and double bowl. This normal size (30 inches wide) can comfortably fit in at least a 33-inch base cabinet.
How many inches is a sink without drain board?
While the average size of one compartment sink without drain board measures 25 inches in length, 27 inches in width, 45 inches in height and 14 inches in depth, the lengthiest compartment sink on average has four compartments very often.
What is the standard size of stainless steel kitchen sink?
The standard size of Stainless steel kitchen sink is measured at 19 gauge which is cost-effective for a kitchen sink. However, the better quality comes with an 18 gauge, which is 0.0500 inches. Many findings have recommended 16 to 18 gauges as a choice for kitchen sink improvement.
How is stainless steel measured?
Stainless steel skins are measured by gauge, the lower the gauge number the better the thickness, durability, longevity and is equally expensive. For example, an 18 number gauge stainless steel sink provides longer wear and tear over a 22 number gauge stainless steel sink. The standard size of Stainless steel kitchen sink is measured ...
What is the thickness of a 16 gauge stainless steel sink?
As I mentioned earlier the lower the number of the gauge the better the quality, hence a 16 gauge stainless steel sink with a thickness of 0.0625 is considered to be a luxury sink. Restaurants and other commercial establishments, on the other hand, use commercial gauges which have a range between 14 to 16 gauge, ...
How deep is a sink?
Similarly taller people can work with the sink without having to crouch. On the other hand, deeper sinks often are more than 10 inches in depth.
How wide is a double bowl sink?
Double bowl sinks vary in width depending on the chosen sizes of the individual bowls. According to Overstock, they can range up to 48 inches in width, compared to the single bowl sink's 23 inches. They can sometimes have two bowls of the same size or have one larger and one smaller bowl. Double bowl sinks can vary between 8 and 10 inches in depth.
What are the drawbacks of a double bowl sink?
The main drawbacks to double bowl sinks regard their spatial limitations. Not only do double bowl sinks require a large amount of counter space, but they may also end up leaving limited space within the sinks themselves. By splitting a sink between two bowls, you can end up with narrower and shallower sinks.
Why do you need two sinks side by side?
Having two sinks side by side can make the dish-cleaning process easier and give your kitchen a more high-end feel. But before deciding on a double bowl kitchen sink, it's important to think about sizes and dimensions. You want to be sure your double bowl sink fits properly in your kitchen and that you have enough space for it to be comfortably ...
Why do we need two sinks?
Whether you're redesigning a kitchen or just improving your washing-up area, many of us may consider opting for a double sink. Having two sinks side by side can make the dish-cleaning process easier and give your kitchen a more high-end feel.
Can you have a double bowl sink?
If you have a particular space and size in mind, you can opt for a custom-sized double bowl kitchen sink. The problem is, a custom-designed kitchen sink can be very expensive. If you're on a budget, you will always be better opting for a standard-sized double bowl sink. There are a few different options out there, so you can choose the dimensions that best suit you.
Can you split a sink between two bowls?
By splitting a sink between two bowls, you can end up with narrower and shallower sinks. This can make double bowl sinks problematic when washing larger items, like Dutch ovens or baking sheets. Advertisement.
Is a double sink good for washing dishes?
Double Sink Pros and Cons. According to Galaxy Stones, many find double bowl sinks very convenient for washing up. Dishes can be washed on one side and rinsed on the other. Home Depot explains that double bowl sinks are also handy for food preparation.
Kitchen Sink Width
The width of a kitchen sink (the measurement from the front of the sink where you would stand to wash up to the back where it is closest to the kitchen wall) is a standard size of 22 inches. This is because kitchen base units have a standard depth of 24 inches, allowing the sink to comfortably fit within the unit frame.
Kitchen Sink Depth
A kitchen sink should have a minimum of 7.25 inches of bowl depth. Shallower than that and your kitchen sink will run out of space for dishes fast. The standard depth is around 8 – 10 inches with 10 inches giving you plenty of room to wash larger dishes without being splashed with water over the countertops.
Kitchen Sink Lengths
The standard length is 33 inches. However, the length of a kitchen sink varies depending on whether you have one bowl or several and the design you opt for.
Kitchen Sink Dimensions
You can find below the diagram that illustrates the kitchen sink dimensions, including standard kitchen sink sizes, average single-bowl sin dimensions, and average double-bowl sink dimensions.
Kitchen Sink Bowl Types
A single bowl sink will have one basin. These types of sinks work well for people who wash large items in the sink, such as pots and pans and baking trays because the large sink space provides enough room for them to soak.
How big is a standard kitchen sink?
The standard sink size and dimensions are about 22 inches long to 30-33 inches wide. Sink dimensions can vary from 9inches in length up to 40 inches for oversized sinks. Single bowl sinks will run on average up to 30 inches in length. Single bowl sinks are typically the standard sinks places in homes. Standard double bowl kitchen sink sizes are 22 ...
How long is a double bowl kitchen sink?
Double bowl kitchen sinks measure up to 48 inches in length. This length includes the countertop strip between the two tubs. Keep in mind that a double bowl sink may actually be a single piece of material. If you’re replacing only your sink tub and not the cabinetry, the proper dimensions are already known.
How long is a kitchen undermount sink?
Some of the existing sink models you can purchase from manufacturers measure more than 60 inches in length.
What is an apron front kitchen sink?
Apron-front kitchen sinks are quite stylish in appearance. They are undermount, but they also need a front cutout on the cabinet. These sinks have a large front end that extends outward from the cabinet, usually one or two inches. Part of the apron-front kitchen sink’s weight gets supported by the front cabinet.
How much lip does an undermount sink have?
The sink has a surrounding lip measuring about one and one-half inches. Subtract about three inches from your countertop depth to get the best sink size. An undermount sink is easy to maintain because the countertop lip overlaps the sink material.
How deep is a kitchen sink?
These are usually about 10 inches by 22 inches, and they have their own slim faucet. These kitchen sinks change the appearance of the kitchen and make for a more professional, sophisticated look to the countertop. Although the standard depth of a sink is 10 inches, feel free to consider deeper ones.
What is the best sink material?
Stainless steel is the most popular sink material. They’re easy to keep clean and polished, but not all sinks are made of the same quality of steel. Stainless steel kitchen sink. The rule of thumb is to use 15-gauge steel or thicker. The lower the gauge number, the thicker the sink.
Standard Kitchen Sink Dimensions
Food service businesses must have a sink with three compartments that each measure at least 18 x 18 x 12 inches. However, the standard household kitchen sink usually has one to two compartments. A residential kitchen sink is typically no more than 36 inches long.
Things to Consider
You know what size sink you need, and you found a style you love. You’re all ready to install the perfect kitchen sink, right? Wrong! There are a few more things to consider before you buy.
Frequently Asked Questions
Buying the perfect kitchen sink isn’t rocket science, but it does take some preparation and know-how. This FAQ will help you get started.
A Final Word on Kitchen Sink Dimensions
When you’re improving your kitchen, take the time to find the correct kitchen sink dimensions before you buy. By following the advice laid out in this article and measuring your space, you’ll find a new sink that’s the perfect fit!
What is the average size of a double sink?
Average double sink: The average sink size for this style is usually round or circular with an average measurement of 19 inches by 19 inches with a standard height of 8 inches.
How wide is a double sink vanity?
The obvious drawback is that these cabinets are very large and may not fit into every bathroom. The vanities usually start at a minimum of 60 inches wide and can go to 84 inches at the extreme.
How wide is a small sink?
In general, small sink sizes are usually round in design, though they still carry a decent water depth, usually around 6-7 inches. Small sinks usually run 15 inches wide, 9 inches long, ...
How big is a stone resin sink?
Smaller Stone resign Sinks: Stone resin sinks usually run 23 inches long, 15 inches wide with a height of 5 inches.
What is a sink base?
Sink base cabinets are another common sink type found in most bathrooms, though your size is ultimately restricted to the average size of the base cabinet installed in your bath space. If you have trouble installing larger sized cabinets, it is often advisable to seek professional help to sort out the plumbing and space needs.
What is the difference between a round and rectangular sink?
Generally, round sinks are smaller and generally deeper when it comes to water height whereas rectangular sinks are larger in overall measurements but more shallow in water depth.
How big is a sink?
Large sink sizes, most commonly used for washing hair or clothes, start at 34 inches long, 22 inches wide with a general water depth of 12 inches. Though there are also sinks that end at 72 inches wide, 24 inches long with the same water depth, so keep your measurements in mind when purchasing.
How deep is a standard bathroom sink?
In general, standard oval and round bathroom sinks have a diameter of 16 to 20 inches and an average water depth of 5 to 8 inches. And standard rectangular sinks measure 19 to 24 inches wide (side to side) and 16 to 23 inches length (front to back). They also have a standard water depth of 5 to 8 inches. For an ADA compliant bathroom, the bathroom ...
How wide is a drop in sink?
Drop in bath sink sizes range from similar to undermount like in the range of 16 to 24 inches wide and 12 to 20 inches from front to back. In these sinks, the rolled edges that allow the sink to be dropped down into a countertop opening also add to its overall size.
How much space do I need for a bathroom sink?
For a single bathroom sink, at least you should install 30-inch vanity. That will leave 4 – 5inches of space on the counter too. If you choose a pedestal sink or a wall mount sink with less enough counter space, you can always add a nearby tower for extra storage. I think it will maximize the space of your bathroom. If not, you can choose a 36 – 48-inch vanity.
How wide is a pedestal sink?
The width applies to the distance from the front to the back of the sink. It varies between 19 inches to 24 inches.
How big should an undermount bathroom sink be?
But usually, undermount bathroom sink should not exceed 30” in width and 22” in depth.
What are the different types of bathroom sinks?
Common bathroom sink types include vanity and countertop sinks like drop-in sinks, undermount sinks, vessel sinks to standalone pedestal sinks and wall hung sinks.
How deep should a small pedestal sink be?
So you can choose a small pedestal sink which is 19 inches wide, 17 inches long and 5 inches deep. In a situation like this, you also have the option to go for a wall- mount sink or for a corner sink.
