How much does a load of gravel cost?
how much does a dump truck load of gravel cost. Gravel prices vary, with the most expensive variety costing $100 to $120 per yard. For gravel, delivery, and spreading, expect to pay between $60 and $75 per yard or between $1 and $3 per square foot. A 4×20 gravel walkway will set you back about $250 to install; a 10×20.
How much does a dump truck load of gravel cost?
See full answer to your question here. Beside this, how much does a dump truck load of rock cost? The cost of gravel ranges from $10 to $50 per ton, $15 to $75 per yard, $1 to $3 per square foot, or $1,350 per truck load depending on the rock type, volume, and travel distance.
How much gravel is in a truckload?
In general, the maximum quantity per truckload is 12 cubic yards of stone, 15 cubic yards of topsoil, and 22 cubic yards of mulch. When it comes to gravel, an ideal average is about 3,000 lbs per yard. A dump truck (pickup truck sized) can carry 1 yard and three-axle dump truck can carry about 16.5 yards of gravel.
What is the price per ton for gravel?
Gravel Prices Per Ton. Bulk crushed stone and gravel prices are $10 to $50 per ton on average. Road base costs $18 to $30 per ton, and plain pea gravel or limestone costs $28 to $45 per ton. Buying gravel in small quantities costs over $100 per ton. It takes 1.4 tons of stone per cubic yard. Gravel Cost Per Yard
What is the cheapest gravel for a driveway?
Cheapest gravel for driveways. The cheapest gravel for driveways is crusher run, crushed shells, crushed concrete, slate chips, recycled asphalt, and pea gravel, which all cost $15 to $30 per yard, or less than $1 per square foot when purchased in bulk from a quarry.
How many feet will a load of gravel cover?
A ton of gravel will cover approximately 100 square feet, 2 inches deep.
What area will 1 ton of gravel cover?
100 square feetUnderstanding Size and Coverage Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.
How many square feet will 5 tons of gravel cover?
How much area does 5 tons of gravel cover:- typically, 5 tons of gravel will cover approximately 540 square feet or 60 square yard or 50 square metres area for standard 2 inch depth. A ton of gravel cover around 108 sq ft area for 2 inch depth, so 5 tons of gravel = 108 × 5 = 540 sq ft coverage.
How much gravel is in a dump truck?
A standard size of dump truck can have capacity to hold 12 cubic yards of stone or 15 yards of topsoil or 14 yards of dirt or 22 cubic yards of mulch or 16.5 cubic yards of gravel per truckload.
Which gravel is best for driveways?
These are the best options for driveway surfaces gravel, because they are small stones combined with rock dust, which makes a more solid driving surface.Crushed Stone #411. It is crushed up #57 stone combined with rock dust. ... Quarry Process. ... Pea Gravel. ... Jersey Shore Gravel. ... Marble Chips. ... Blackstar or Blacktrap Rock.
How deep should you lay gravel?
Mulch and gravel under 1-1/2” in size will need to be 2-1/2” deep. Gravel 1-1/2” to 2” will need to be 3” deep, and 2” to 4” gravel needs to be 4” deep. This is to provide complete coverage and so you cannot see the landscape fabric (weed-mat) through the gaps in the gravel.
How do I calculate how much gravel I need?
Measure the length and width of the area in feet and multiply the figures together. Multiply your area figure by the depth of gravel that you wish to use, ensuring your measurement is also in feet. If your depth is in inches, divide it by 12 first. You now have a cubic feet volume figure.
What depth should a gravel path be?
around 4 inchesAim for a depth of around 4 inches and use a square edge spade to ensure the sides of the trench are straight and even. When finished, you should then smooth the bottom of your trench with a rake and compact it using a tamper or other flattening tool.
How deep should my gravel driveway be?
Driveway Layers A gravel drive should have a first layer of baseball-sized stones at least 4 inches deep. According to Tim Carter of AskTheBuilder.com, each layer thereafter should be 4 inches thick and in gradually smaller stone.
How do I calculate how much gravel I need for my driveway?
Divide the measurement in inches by 36 to find the driveway's depth in yards. Most driveways should have a depth of 6-8″ of gravel. The formula to find volume is length × width × depth. Multiply the width by the length by the depth in yards to find the cubic yards of gravel needed.
How many yards is 9 tons of gravel?
6 tons of gravel = 0.714 ×6 = 4.284 cubic yards, 7 tons of gravel = 0.714 ×7 = 4.998 cubic yards, 8 tons of gravel = 0.714 ×8 = 5.712 cubic yards, 9 tons of gravel = 0.714 ×9 = 6.426 cubic yards and 10 tons of gravel = 0.714 ×10 = 7.140 cubic yards.
How much does gravel cost?
Small bags typically cost $2-$8 or more, depending on size, type and location; up to five gallons of gravel can cost $3-$9 or more. For example, Home Depot charges $3.90 for a 50-lb. bag of all-purpose gravel [ 1] . and Seffner Rock & Gravel [ 2] in Tampa, FL sells white or brown river rock in 3/8", 3/4" or 1.5" sizes for $5.65 for five gallons.
How much does it cost to haul gravel?
A cubic yard of gravel (weighing roughly 1.2 to 1.7 tons) costs about $10-$90 or more if hauled away by the customer, or $20-$120 or more delivered. For example, at Edstrom Construction [ 4] in Rexburg, ID charges 3/4" road base gravel is $9.75 per cubic yard for 3/4" road base gravel or $16.80 delivered locally; decorative gravel is $21 a cubic yard or $28.05 delivered. The Rock Shop [ 5] in Durham, NC charges $36 per cubic yard of for driveway gravel and $89 per cubic yard for 1" decorative tan gravel; delivery requires a minimum of 2 cubic yards of material, and additional fees apply.
How much does it cost to install a gravel driveway?
Complete installation of a gravel driveway starts at roughly $0.75-$3 or more a square foot, or about $300-$1,000 for a 12'x25' single-car driveway, 4"-8" thick. Prices can double for a roadway-quality gravel driveway, or $450-$1,800 for 12'x25' and $11,000-$60,000 or more for a driveway 12' wide and a quarter-mile long.
Where to put bulk gravel?
When buying bulk gravel, it's typical to check in with the stone yard office, weigh the hauling vehicle, load the material, then weigh the vehicle again to calculate the cost. With delivery, the gravel may be deposited in one pile at the curb, or spread out along the planned driveway, depending on the terms of delivery.
What is gravel used for?
Gravel can be used as ground cover; as a base for roads, driveways, walkways or patios, or on its own as both base and surface material for paving projects.
How much does gravel cost?
Gravel prices for a driveway range from $10 to $50 per ton or $15 to $75 per yard depending on the rock type, volume ordered, and delivery fees. When including delivery, spreading, and compacting, driveway stone and rock costs $100 to $120 per ton installed.
How much does gravel cost per square foot?
White gravel shimmers in the light, and can cause a glare on sunny days. Black gravel driveway rocks from 0.50" to 1" in size cost $3 to $10 per square foot, $96 to $140 per cubic yard, or $76 to $85 per ton. Black lava rocks are the most common and affordable, while true-black granite chips are rare.
How much gravel does a HDPE grid need?
HDPE plastic rings connected by an interlocking geogrid structure allow for a 1" gravel fill and require 0.66 cubic yards of gravel per 100 square feet of grid.
How much does a white gravel driveway cost?
A white gravel driveway costs $2.77 to $4.80 per square foot, $30 to $120 per cubic yard, or $20 to $100 per ton for less-expensive white stones up to 1". A white rock driveway is available in crushed granite, white quartz blends, limestone, and sometimes pea gravel. White gravel shimmers in the light, and can cause a glare on sunny days.
What is the best driveway for long driveways?
Gravel driveways are a popular paving choice for long driveways because it's cheaper than asphalt and concrete, comes in many colors, eco-friendly, and adds curb appeal.
How much does it cost to build a crushed limestone driveway?
A crushed limestone driveway costs $1.50 to $2 per cubic foot , $40 to $54 per cubic yard, or $30 to $38 per ton for up to 1" stones. Crushed stone gravel can come in any color, though most popular crushed stone blends are in neutral, earth-toned colors.
How much does it cost to spread gravel?
The cost of spreading gravel on a driveway is $10 to $25 per cubic yard, or $46 per hour per worker, though this cost may be included with gravel delivery charges. After spreading, each layer of gravel needs to be compacted together to increase stability, and to prevent ruts and sinking.
What factors affect the price of gravel?
Factors affecting gravel cost. While gravel is sold in affordable bags, the following factors will influence the price you pay: Types: Base gravel, crushed stone and pea gravel are all types of gravel available to purchase. Each type will have a different price point.
How much does pea gravel cost?
Pea gravel is sold in large bags and in kilograms with an average cost of £85.20 per 800kg. This type of gravel is more expensive than standard options but also more attractive.
What is gravel used for?
Gravel is a versatile and affordable material that has endless uses. Available in many colours and sizes, it can be used to emphasize or highlight garden landscaping and is great for plant drainage. Not only is gravel aesthetically pleasing, but it can also be used as a base for new patios and to create stylish driveways and paths.
How long does gravel last?
Long-lasting: Gravel has the potential to last for 100 years which is much longer than other driveway or path materials. Simple to install: Adding a weed-proof membrane is essential, however, once this is done gravel can simply be poured into the space.
What are the benefits of gravel?
Benefits of using gravel. With a fantastic range of colours, styles and sizes, gravel can accentuate any area of your property. From paths to flowerbeds and large driveways, there are a wide variety of uses. Furthermore, you can look forward to the following benefits:
How much is a ton?
Depending on where you are in the world a ‘ton’ can mean: If you’re in the UK: A ton is approx. 1,016 kg. If you’re in the US: A ton is approx. 907 kg. And, if you say tonne or want a metric tonne: Then that’s 1,000 kg in the UK and US. To keep things simple, we have applied a value of 1,000 kg throughout this article whenever we mention ...
Is gravel driveway better than concrete?
An alternative to concrete and slabs, gravel is easier to install and maintain. Furthermore, a well-installed gravel driveway can increase the value of your home and make an attractive entrance to your property. You can even combine it with lawn edging to create stunning features.
How much does gravel cost?
The cost of gravel ranges from $10 to $50 per ton, $15 to $75 per yard, $1 to $3 per square foot, or $1,350 per truck load depending on the rock type, volume, and travel distance. Delivery is included up to 10 miles. Gravel spreading costs $12 per yard or $46 per hour.
How much does it cost to deliver crushed stone?
You can rent a dump truck or pick-up for hauling crushed stone yourself for as low $265 per day or less to reduce costs.
How much does crushed rock cost?
Minus crushed rock is less expensive, ranging from about $12-$35 per cubic yard in rural areas and $15-$75 in cities.
How many square feet does a cubic yard of crushed rock cover?
As a basic guideline, one cubic yard Crushed rock covers about 324 square feet, one inch deep. Similarly, it covers 162 square feet, 2 inches deep. You have to figure out the size of the area that you want to cover with Crushed stone to place an order and get pricing.
What is crushed rock good for?
It also well suited for decorative pathways, walkways, plant beds and flower beds. If you do not know anything about crushed rocks or gravel stone and unsure of which type to buy, ask a landscaping professional, particularly if you have problems related to poor drainage, muddy conditions or erosion.
What are the two types of crushed rocks?
Crushed Rocks have mainly two types, minus and clean. Both are available in a variety of sizes and colors, but both have different use and purpose.
Is crushed rock the same size as dirt?
On the other hand Clean crushed rock does not have the smaller pieces of rock, dirt or sand. It comes mostly in 1/4 inch sizes and all are usually same size. Because clean crushed rock does not pack down tightly or stick to the base ver well, it is not ideal as a base or in concrete mixture. But it is suitable for new driveways or those with drainage problems. It also well suited for decorative pathways, walkways, plant beds and flower beds.
How much does it cost to deliver crushed rock?
Cost of Crushed Rock Delivery 1 Minus crushed rock is less expensive, ranging from about $12-$35 per cubic yard, not including delivery or spreading. 2 Clean crushed rock usually ranges in price from $30-$50 per cubic yard, also not including delivery or spreading.
How much does crushed rock cost?
Clean crushed rock usually ranges in price from $30-$50 per cubic yard, also not including delivery or spreading.
How many square feet is crushed rock?
Crushed rock is typically sold by the cubic yard (27 square feet). Before you place an order, you’ll have to determine the square footage of the area you need to cover and how deep you want the rock to be. As a guideline, one cubic yard covers about 324 square feet, one inch deep.
What are the two types of crushed rocks?
There are two basic types of crushed rocks: minus and clean. Both are available in a variety of sizes and colors, but they are used differently. Any crushed rock with the word minus in the description (3/4-inch minus, for example) will also contain smaller pieces of rock, dirt and/or sand.
What is crushed rock?
Crushed rock is a type of gravel that has been mechanically broken down into small pieces and sorted by size. It is a highly versatile product, used for driveways, pathways, flower beds or as a base for concrete, pavers, asphalt, retaining walls, sheds or foundations.
What is the most common size of pea gravel?
Pea gravel is a small hard stone that is about the size of a pea. The most common size is 3/8 inch.
Is a sandstone driveway good for a flower bed?
But it is great for new driveways or those with drainage problems. It also works well for decorative pathways, walkways, plant beds and flower beds. If you’re unsure of which type to buy, ask a professional, particularly if you have problems such as excessive erosion, improper drainage or muddy conditions.
