Typical Bathtub Sizes
| Type of Bathtub | Length | Width | Height |
| Alcove Bathtub | 60 inches | 30 inches | 18 inches |
| Drop-in Bathtub | 45 to 72 inches | 30 to 32 inches | 14 to 20 inches |
| Oval Bathtub | 60 inches | 41 inches | 24 inches |
| Whirlpool Bathtub | 60 inches | 32 inches to 36 inches | 18 inches to 23-1/4 inches |
How many square feet is a standard tub surround?
Your average bath surround will measure in around 1,920 square feet. This number will generally differ depending on the size of your bathtub and the space you have available in your bathroom. Typical pre-constructed surrounds have a length of 60 inches, a height of 32 inches and a width of 32 inches -this generally can fit a small to moderate sized bathtub.
What is the best bathtub surround?
Best Tub Surround FAQ What are the dimensions of a standard tub surround? The standard measurements for a bathtub surround are 60 inches in length, 32 inches in height, and 32 inches in width. Sizes do vary depending on the size of your bathtub. Some whirlpool tubs measure 72 inches in length, so you will need a surround that can cope.
How to build bathtub surround?
Update a Bathtub Surround Using Beadboard
- Measure Tub Surround. Use tape measure to determine length and height of tub and note the dimensions.
- Create a Ledge. Using router, create a ledge notch spanning entire length of back side of trim.
- Cut Trim. Referring to the dimensions, measure, then mark trim with pencil and level. ...
- Cut Beadboard. ...
- Sand and Paint. ...
- Assemble Panel. ...
- Install Panel. ...
What is the average height of a tub?
Walk-in tubs are usually alcove style and are generally the same average size of 60 inches in length and 30 inches in width. They differ in their height, however, which is normally around 30 inches to provide depth enough for the bather to be comfortably submerged while sitting on the built-in tub bench.
How tall is a standard shower surround?
Shower tiles should generally be approximately six feet and two inches high in the shower. This height covers the minimum of three-fourths of the shower to keep water flowing into the drain and not seeping into the walls.Sep 20, 2020
How high should tile be above tub?
To help hide the awkward appearance of an out-of-level tub, make the bottom row of tiles at least three-fourths of a tile high. For a shower enclosure, extend the tile and the backerboard at least 6 inches above the showerhead. For a tub surround only, install the backerboard and tile 12 inches above the tub.Nov 20, 2020
How do you measure a tub surround?
1:235:31Tub to Shower Remodel: How to Measure for Your Onyx Shower KitYouTubeStart of suggested clipEnd of suggested clipAdd one inch to this measurement to get the width of your replacement on it shower base.MoreAdd one inch to this measurement to get the width of your replacement on it shower base.
How tall is a normal shower wall?
Wall Height of a Shower Inside the shower, the height from the drain to the top of the wall needs to be at least 70 inches. The difference in heights takes into account the shower pan, also called the base, on the floor of the shower.Nov 2, 2020
How high is half height tiling?
This classic design feature is usually between 34 to 54 inches high, creating a traditional aesthetic appeal. You may also want to opt for a contemporary wainscoting, usually with a top border that is squared-off with a glazed edge and blended in a plain paint finish.
How high should a bathroom half wall be?
Knee walls are often referred to as a half-wall or partition wall. They extend from the floor to a height of approximately 3 feet (91.44 cm) and are often constructed around or up against a shower stall or bathtub surround.Oct 11, 2018
How do you replace a tub surround?
0:001:03Installing a Tub Surround-DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart by removing your fixtures and thoroughly clean the area next create a cardboard template forMoreStart by removing your fixtures and thoroughly clean the area next create a cardboard template for your fixture holes transfer the markings to your panel. And cut out the holes.
What goes behind a tub surround?
The insulation behind the tub or shower should be equivalent to the insulation in the rest of the exterior walls and should be covered with an air barrier of cement backer board, rigid foam insulation, or non-paper-faced drywall that is sealed at the edges and seams to provide a continuous air seal.Mar 14, 2016
How is bathtub depth measured?
0:001:00How to measure a bath - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen on the exterior of the bath measure from your floor to the top edge. Giving you the height.MoreThen on the exterior of the bath measure from your floor to the top edge. Giving you the height. Finally the depth which is the interior measurement from the deepest part of your bath to the overflow.
How tall should a pony wall be in a shower?
about 3 feet tallFor all intents, a pony wall is just a short wall that does not reach the ceiling; it need not be any particular height nor width, though it typically reaches about 3 feet tall.Feb 24, 2020
How tall are walk in showers?
The average walk-in shower in the U.S. measures 60" x 30", though size options can vary widely, typically up to 60" x 42" for a rectangular shower and 42" x 42" for a square one....What is the average walk-in shower size?Common DimensionsAverage walk-in shower size for larger bathrooms60" x 42"2 more rows
How wide should a bathtub be?
As you plan the location for your tub, remember that designers recommend the free space in front of the tub should be a minimum of 60 inches long and 30 inches wide, to allow users to safely enter and exit the tub.
How tall is a whirlpool tub?
Length: 60 inches. Width: 32 inches to 36 inches. Height: 18 inches to 23 1/4 inches. A whirlpool tub can be a viable option in almost any medium- to large-sized bathroom that can accommodate a standard alcove tub or drop-in tub. Continue to 5 of 6 below.
How long is an alcove tub?
Length: 60 inches.
How much space do you need for a drop in tub?
It's standard practice to construct the deck for a drop-in tub so there is at least 6 inches of flat deck space around all sides of the tub.
What is a drop in tub?
Another popular style of bathtub is the drop-in tub, which is designed to fit into a constructed deck with the top and exposed sides finished off with tile or another material. These tubs have no factory-finished sides at all; they simply drop into a cutout in the deck, much the way a drop-in sink fits into a vanity countertop. This is a style often used for luxury whirlpool tubs or large two-person tubs.
What is a corner bathtub?
Corner bathtubs are a great option for a primary bathroom, especially when you love nothing more than lounging in a tub with a good book or watching a wall-mounted television. Corner bathtubs are more about luxury, fun, and treating yourself well than about getting clean.
How far away should a toilet be from a tub?
In practice, this may not be also possible, but even in small, cramped bathrooms, the toilet or vanity cabinet should be spaced at least 12 inches away from the edge of the tub, and the rest of the tub should have open floor space at least 24 inches wide. Basic Types of Bathtubs. 01 of 06.
How wide is a small tub?
Some small tubs have an interior soaking width of 22 inches. Actually getting inside the tub before you buy is a good idea to ensure that a small tub will work for you. Small tub length: 43-55 inches. Small tub width: 30 inches. Small tub height: 14-15 inches.
How tall is an undermount tub?
While undermount bathtubs might not be obviously more expensive than an alcove, they require more expense in labor and materials framing for the tub and tiling or stone. Undermount tub length: 60 inches. Undermount tub width: 30 inches. Undermount tub height: 16 inches.
What is an alcove tub?
One of the most common tubs, an alcove tub, sits at the end of a small bathroom width wise, flanked by three walls. An alcove tub has one finished side. The other three sides are unfinished, usually with a small lip for tiling over to prevent water damage.
How deep is a soaking tub?
The shortest tubs are 14 inches tall, but only have about eight inches of soaking depth. A shallow tub like this is fine for people who mostly shower, bathe children, and don’t want a tall tub to step in to.
Why do whirlpool tubs keep water hot longer?
If you like taking a nice long soak, whirlpool tubs often keep the water hot longer because of the water movement. There are a variety of jet options that can blow water or just air.
How wide is a Whirlpool jet tub?
Tubs that cycle water cannot have soap or salts going through the jet tubes. Whirlpool tub length: 60 inches. Whirlpool tub width: 32-36 inches.
What is a drop in bathtub?
Drop in bathtubs are similar in dimensions to alcove tubs, except that the front of the alcove must be built up as well instead of having a finished front piece. You end up with a tiled front and a more finished and luxurious look.
How wide is a bathtub?
For a typical standard, wall-wall bathtub, the measures will be roughly 60 inches long, 30-32 inches wide.
How deep is a freestanding bathtub?
Common or standard dimensions for a freestanding bathtub are: 60 inches long (5ft), 30 inches wide (2.5ft) with 19 inches of water depth (1.89ft). Small freestanding bathtubs can run 55 inches long(4.58ft), 27 inches wide (2.25ft) with a water depth of 15(1.25ft).
What is a freestanding tub?
Freestanding tubs are tubs that are unconnected to any walls or surfaces. Depending on the material, freestanding tubs are slightly heavier and are usually distinguishable by the smooth lines and modern design. Freestanding tubs require a rather large bathroom to accommodate the size of the tub as well as the increased weight. If you’re unsure about the size of a freestanding tub and want to learn more about the materials, Badeloft offers FREE bathtub templates and material samples for freestanding bathtubs. Click HERE to request one.
What is an alcove bathtub?
Alcove Bathtub. The most common bathtub on the market, and what most people consider to be the standard bathtub. Affordable and easy to install, the only drawback is its relatively small size. Alcove bathtubs usually fit within a three wall enclosure, making them ideal for a shower combination as well.
What is a drop in tub?
Drop in Baths. Most bathtubs have a visible finished side, usually called an apron or skirt, which is flat or bowed. Drop in tubs have no finished sides and are usually installed in an alcove or peninsula jutting out in the middle of your bath space.
How deep is a corner bath?
Common size or standard dimensions of a corner bath are: 60 inches by 60 inches or 5ft by 5ft with a water depth of 20 inches (1.6ft). Small sizes run 48 inches by 48 inches (4ftx4ft) with a water depth of 18 inches (1.5ft). Large sizes running at 72 inches by 72 inches (6ftx6ft) with a water depth of 20 inches. (1.6ft).
How deep is a drop in tub?
Standard dimensions again are similar to drop in tubs running at: 60 inches long(5ft), 30 inches wide(2.5ft), with a water depth of 16 inches(1.3ft).
How Do You Measure For a New Tub Surround?
Measuring for a new tub surround is easier than you think. First, place your tape at the top of the tub. Then find the width from one end to the other. Next, measure the distance from the top of the surround to the ceiling. Now you have the numbers for your calculation.
Can You Put a New Tub Surround Over An Old One?
Installing your new tub surround isn’t as time-consuming or expensive as it used to be. Today, you can pop a new unit right on top of an old one. The solution is called a “bathtub liner,” and it even covers the walls. Plus, you don’t have to replace anything to get it in and it could be less expensive.
Do You Put Drywall Behind a Tub?
If you have to install drywall behind your new tub surround, it might affect the measurements. Luckily, you may not have to. It all depends on the type of unit you choose.
What Kind of Drywall Do You Put Behind a Tub?
One-half of an inch probably won’t throw off your measurements too much. So, does this mean you can just slap some regular drywall behind the tub and call it quits? No. You have to use a special kind of cement board to keep moisture from seeping into your walls.
Related Questions
Bathtub overlays can cost anywhere from $800 to $1,500. Plus, you have to also pay for installation if you don’t do it yourself. Professional installation can add up to $3,000 to the total price. That means you’ll end up paying between $1,800 and $4,500 on average.
Surround Your Tub with Precision
Measure your tub surround like a pro and then install it quickly. Then choose which method you want to use, and enjoy the fast and easy installation process. If all else fails, call in the experts to help you get the job done right.
How wide is a tub?
Most tubs are 60 inches long, but how wide is your? Some tubs are 30 inches, some 32 inches, and on up from there. You will need to pick a surround kit that is the right measurements for the tub or one that is adjustable to your dimensions. Often, people replace the tub surround and install a new tub at the same time, but this is not necessary if you do some research and make sure the tub surround will fit your existing tub.
What is the most adjustable tub surround?
The thin type is the most adjustable in length and width because the two corner pieces overlap the back and side walls to take up the difference in space. Thin tub surround panels are glued on with a tub surround adhesive and have to be smoothed out while being installed.
What is a tub surround made of?
Most surrounds are made of acrylic and fiberglass materials , which make them light and easy to install. One-piece tub surround units are available for new construction or major remodeling, but if you are removing an old tub surround with bathtub still in place, installing a new three-piece or five-piece surround is often the way to go.
Where is the window in a tub?
Sometimes there is a window at the top of a wall in the tub enclosure area. Make sure that the measurements of the new tub surround will not interfere with the window. If you do have a window in the area, you will have to pick thin panels that are relatively easy to cut and trim around a window.
Can I replace a tub surround and install a new tub at the same time?
Often, people replace the tub surround and install a new tub at the same time, but this is not necessary if you do some research and make sure the tub surround will fit your existing tub.
Is a tub surround one size fits all?
Tub surrounds are not one-size-fits-all. There are different sizes, colors, thicknesses, and installation requirements. Here are four important things to do before ordering your enclosure.
Does it matter which side of the tub surround valve is on?
Keep in Mind. With a tub surround kit, it does not matter which side your tub faucet valve is on. Unlike when buying a tub, when you need to specify whether the faucet valve is on the left or right side, surrounds are meant to fit either.
How many grab bars are needed for a tub?
On the back wall, two grab bars are required. The grab bars mounted on the back (long) wall shall be a minimum 24 inches (610 mm) in length located 12 inches (305 mm) maximum from the foot of the tub and 24 inches (610 mm) maximum from the head of the tub.
Where are grab bars located in a bathtub?
Grab Bars at Bathtubs.#N#Controls are required to be located in an area between the open edge and the midpoint of the tub ("offset") and to be located at the foot of the tub.
How far above the floor should a grab bar be?
One grab bar on the back wall shall be located 9 inches (230 mm) above the rim of the tub. The other shall be 33 to 36 inches (840 mm to 915 mm) above the bathroom floor. At the head of the tub, the grab bar shall be a minimum of 12 inches (305 mm) in length measured from the outer edge of the tub.
