Peel Away 1 is good for multiple layers of paint and can work through tough paint surfaces easily. On the other hand, Peel Away 7 is a biodegradable paint remover that does well on removing single layers and modern paint formulations. The best way to choose between Peel Away 1 and Peel Away 7 paint remover is to look at your specific situation.
Can you use peel away 7 on sandstone?
PeelAway 7: PeelAway 7 is a low odour water-based paint stripper, that is intended for use on most modern paints and varnishes found in areas painted after 1972. Fine to use on almost any surface ranging from sandstone to fibreglass.
What is peelaway 7 used for?
PeelAway 7 is a low odour water-based paint stripper, that is intended for use on most modern paints and varnishes found in areas painted after 1972. Fine to use on almost any surface ranging from sandstone to fibreglass. It is naturally degradable and does not contain methylene chloride or caustic soda.
How do I Clean my peelaway products?
Once PeelAway has successfully removed the layers of finish, peel away the blanket, remove any excess and then wash down the treated surface PeelAway 7 can be cleaned off with warm water and PeelAway 1 with neat vinegar. A dedicated neutraliser comes with the larger units of PeelAway 1.
What is the difference between Peelaway 1 and 7?
Peelaway 1 is designed to remove old toxic lead based paints, while Peelaway 7 is designed to remove modern paints and lacquers . If you are unsure which system to use this is the perfect way to decide with a side by side test before starting your project.
What is Peel Away 7?
Peel away 7 solvent based paint remover is a non-toxic paint removal system that can be used as a heavy-duty paint stripper on virtually all interior and exterior surfaces, and is excellent for safe lead based paint removal on intricate, carved, and molded surfaces.
Is Peel Away 1 Safe?
Peel Away® provides innovative solutions for paint removal. With our special laminated paper sheets it completely seals the stripping process preventing atmospheric pollution and contamination. It is safe for the removal of all types of paint including Lead paints, saving the environment by fully containing the waste.
How long do you leave Peel Away 7 on for?
Dwell time will be as determined by the test patch, between 1 and up to 48 hours depending on paint types, thickness and temperature.
Can you spray Peelaway 1?
When spraying dilute up to 1 part water to 5 parts Peelaway® 1. We recommend an airless sprayer using a medium course spray nozzle. Features and Benefits: One application removes multiple coats of most paints, varnishes and high- performance coatings.
How do you use Peelaway 1?
4:267:18How to Use Peel Away 1 & 7 Paint Remover - YouTubeYouTubeStart of suggested clipEnd of suggested clipPeel back a small section of the cover and paste with a spatula to check the surface then carefullyMorePeel back a small section of the cover and paste with a spatula to check the surface then carefully replace.
Is Peel Away 1 water based?
Unlike other popular paint removers, Peel Away® 1 does not contain the dangerous chemicals methylene chloride or NMP, making it a much safer alternative for homeowners and professionals. This product is zero VOC, water-based, non-flammable, and biodegradable.
How do you apply peel away 8?
Apply Peel Away® 2mm thick, cover with laminated paper and seal the edges with masking tape. Dwell time should be between 8 to 24 hours only. Remove carefully and wash down the surface. This will not affect the epoxy gel coat.
Is peel away safe for lead paint?
Peel Away®1 Heavy-Duty Paint Remover is a top choice for Professionals who perform historic restoration and lead paint abatement for over 35 years. This paint removal system is formulated for lead-based coating systems prior to 1978.
Can you leave Peelaway on too long?
Leaving on for not long enough could mean the process has not completed. Leaving on too long could damage the substrate or you may find the Peelaway® blanket and paste becomes too hard and difficult to clean up.
How much peel away 1 do I need?
per gallon; results may vary based on substrate texture and porosity. Spray Application: Dumond® Chemicals recommends that Peel Away® 1 be sprayed with a texture sprayer. Pump size should be at least ¾ gallon per min. Aluminum guns should NOT be used, as a chemical reaction will take place with Peel Away® 1.
Can I use Peelaway on glass?
Note: Peel Away®1 will not affect glass or plastic surfaces, but will etch aluminum. ing air bubbles. Leave paper-covered paste in place for dwell time determined during patch testing.