Edge Flange: Combines a bend and sheet metal tab in a single operation. User selects the desired edge, bend radius, angle, flange length, and flange position. Miter Flange: Allows the user to add multiple flanges to one or more of the edges of the sheet metal part.
What is a miter flange feature?
A miter flange feature adds a series of flanges to one or more edges of a sheet metal part. The sketch can contain lines or arcs. If you use an arc to create a miter flange, the arc cannot be tangent to the thickness edge.
What is knife edge and flange edge?
Knife Edge. A knife edge is a seam without a decorative finish.It tapers to sharp, crisp edges and corners, creating a very simple, clean, polished look. Sample product images with flange edging: Flange Edge. A flange edge consists of milted corners sometimes between 1/2" to 3". In some cases, flanges may have two coordinating fabrics.
How to make a miter flange in SolidWorks?
If you're using a miter flange in your Solidworks project, then follow these steps: 1) Select one of the two flanges 2) Create a line 3) Move this line into position 4) Gain access from other side 5) Repeat step 1-4 until both surfaces are meeting at an angle of 90 degrees How do you make a metal sheet flange?
What is a flange in sewing?
A flange consists of fabric with a seam allowance ranging from 1/2" to 3" beyond the dimensions of the sham. This creates a large, elegant flourish. Sometimes, two coordinating fabrics are used for the flange.
What is Mitre flange?
A miter flange feature adds a series of flanges to one or more edges of a sheet metal part. The sketch for a miter flange must adhere to the following requirements: The sketch can contain lines or arcs. If you use an arc to create a miter flange, the arc cannot be tangent to the thickness edge.
What is an edge flange?
You can add edge flanges to one or more edges. General edge flange characteristics include: Thickness is linked to the thickness of the sheet metal part. Sketch line of the profile must lie on the selected edge.
How do you use the edge flange?
0:110:45Customizing Sheet Metal Edge Flanges in SolidWorks - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo remember that within every edge flange you can adjust the sketch. That's a much more effectiveMoreSo remember that within every edge flange you can adjust the sketch. That's a much more effective way than trying to cut it out with a cut.
How do you use the Mitre flange in Solidworks?
0:424:00Video Tech Tip: Creating Miter Flanges in SOLIDWORKS Sheet ...YouTubeStart of suggested clipEnd of suggested clipClick okay there's my four miter flanges add it to this box. Now that's the real easy way the easyMoreClick okay there's my four miter flanges add it to this box. Now that's the real easy way the easy way is. I actually use the miter flange command itself and what I'm going to do is.
How do you trim edge flange in Solidworks?
3:348:34SOLIDWORKS - Mitered Edge Flanges on Non Parallel EdgesYouTubeStart of suggested clipEnd of suggested clipUse the trim manatees command.MoreUse the trim manatees command.
What is flange in sheet metal?
A flange feature consists of a face and bend connected to an existing face along a straight edge. To add a flange feature, you select one or more edges, and specify the size and position of the material added.
How do you make a curved flange?
1:2711:33How To Make Curved Flanges On Sheet Metal Panels | Tipping DieYouTubeStart of suggested clipEnd of suggested clipBut what if the flange needs to be curved. Like this line here there's a way to do this obviouslyMoreBut what if the flange needs to be curved. Like this line here there's a way to do this obviously you can't do it in the break because the break would just come straight across here.
Can you create a sheet metal flange using a curved edge?
Now with SOLIDWORKS 2021, you can add curved edge flanges to edge flanges created off a planar base and on nonlinear or circular edges of nonplanar faces. That's verbatim from the help file. What it really means is that now you can added flanges to anything you can come up with for your sheet metal design.
How do you do a swept flange in Solidworks?
To create swept flanges:Sketch an open, non-intersecting profile on a plane or face.Create a path for the profile to follow. You can use a sketch or a series of existing sheet metal edges. ... Click Swept Flange. ... In the graphics area: ... Set options in the PropertyManager, then click .
How do you miter sheet metal?
4:2615:07Sheet metal miter flange, edge flange and hem tools in SolidworksYouTubeStart of suggested clipEnd of suggested clipSo select my two flange. And we need to select a plane. And find an edge. So let's zoom in to thisMoreSo select my two flange. And we need to select a plane. And find an edge. So let's zoom in to this corner section so here is the edge we want to form a miter on and we're going to pick this face.
How do you make a flange in Solidworks?
To create a base flange:Create a single open, single closed, or multiple contained closed sketch. ... Click Base Flange/Tab on the Sheet Metal toolbar, or click Insert > Sheet Metal > Base Flange. ... Set options in the PropertyManager and click .
How do I create a hem in Solidworks?
on the Sheet Metal toolbar, or click Insert > Sheet Metal > Hem....In the PropertyManager, under Edges:Click Edit Hem Width to edit the sketch of the profile.Select Material Inside. or Bend Outside. to specify where to add the material.Click Reverse Direction to create the hem on the opposite side of the part.
What is scallop edge?
A scalloped edge is a flange that is then finished in a shape similar to a line of curved or scallop shell edge, lined up in a continuous pattern. Timeless and stylish, scalloped borders are often used with matelassé fabric but can also be on pillowcases and duvet covers.
What is knife edge pillow?
A knife edge pillow is one with a seam without a decorative finish. It tapers to sharp, crisp edges and corners, creating a very simple, clean, polished look. These types of shams are typically made with an envelope closure or sometimes a hidden zipper, especially if it’s more of a decorative style pillow.
What is a matelasse bed?
A matelassé, sometimes referred to as a bedspread or blanket cover, is a specific type of coverlet.
