What is the difference between Garlon 3A and 4 ultra?
Garlon 4 Ultra will provide better Russian olive or saltcedar control than Garlon 3A when applied as a foliar, modified cut stump, and basal bark treatment. Garlon 3A will provide good control as a cut stump application (always mix with water) and will provide fair to good control when applied as a foliar treatment.
Is Garlon 3A a good control for cuttings?
Garlon 3A will provide good control as a cut stump application (always mix with water) and will provide fair to good control when applied as a foliar treatment. Garlon 3A should be used when applying in aquatic sites.
Can you mix Garlon 3A with basal oil?
Always mix Garlon 3A with water for cut stump treatments. Note:applications with Garlon 3A must be made as soon as possible or at least within 30 minutes after cutting the stems. MIXING WITH BASAL OIL 1. Always use basal oil with Garlon® 4 Ultra for basal bark, cut stump, and modified cut stump applications.
Does milestone need to be added to Garlon® 3A?
Milestone does not need to be added for basal bark, cut stump or modified cut stump applications. The addition of Milestone to either Garlon® 3A or Garlon® 4 Ultra as a foliar treatment will improve control of both Russian olive and saltcedar.
What is Garlon 3A used for?
Use Garlon® 3A specialty herbicide for the control of woody plants and broadleaf weeds in range and pasture, forests and non-crop areas including manufacturing and storage sites, rights-of-way such as electrical power lines, communication lines, pipelines, roadsides, railroads, fence rows, non-irrigation ditch banks, ...
Is Garlon 3A safe?
Garlon 3A® - DANGER - Corrosive. Causes irreversible eye damage. Harmful if swal- lowed, inhaled, or absorbed through the skin. Prolonged or frequently repeated skin contact with herbicide concentrate may cause an allergic skin reaction in some individuals.
Is Garlon 4 restricted use?
Tordon 101M and Tordon K are federally Restricted Use Pesticides. State restrictions on the sale and use of Garlon 4 Ultra apply. Consult the label before purchase or use for full details.
How do you mix Garlon 3A?
Triclopyr is available either as an amine formulation (Garlon 3A) or ester formulation (Garlon 4). For foliar applications, mix one to three ounces Garlon 4 or two to four ounces Garlon 3A per three gallons of water. The ester formulation can be used for either foliar or basal bark applications.
Which is better glyphosate or triclopyr?
When to Choose Triclopyr. The main pro to using Triclopyr is that it doesn't damage most grasses, so it is the best choice to control woody seedlings and broadleaf weeds emerging in lawns. Glyphosate is not as good at killing woody plants as Triclopyr, and fewer plants have resistance to Triclopyr vs Glyphosate.
How do I use garlon 4?
Premixing Garlon 4 with 1 to 4 parts water may help in difficult situations. Fill in the spray tank about half full with the liquid fertilizer, then add the herbicide with agitation and complete filling the tank with fertilizer. Apply immediately and continue agitation in the spray tank during application.
What is Garlon 4 Ultra used for?
Vegetation managers and foresters rely on Garlon® 4 Ultra specialty herbicide to control unwanted weeds, brush and trees beneath electrical power lines; along railroad beds, roadsides and pipelines; and in commercial forestry and wildlife openings, including grazed areas on these sites.
Is triclopyr safer than glyphosate?
From both a human and environmental safety standpoint, Glyphosate is safer for use than Triclopyr. If Glyphosate use is a concern, consider using a natural Glyphosate alternative, such as Ammonium Nonanoate.
What is the active ingredient in garlon 4?
TriclopyrTriclopyr, the active ingredient in Garlon 4, has been classified as Category D – “not classifiable as to human carcinogenicity” by the EPA.
Do you need surfactant with triclopyr?
See label for complete application instructions. It is recommended to add a non-ionic surfactant for best results but is not required per label instructions.
How long does it take for garlon to work?
within three daysGarlon 600 – overview Acts rapidly on weed foliage to provide quick browning of leaves and stems. Leaf brownout and distortion of stem tips will normally be obvious within three days of application. Short residual life in the soil allows planting of sensitive crops and shrubs soon after application.
Can you mix triclopyr with Roundup?
A mixture of glyphosate plus triclopyr is a useful standard mix for managing most vegetation targets. It has broad activity, and low risk to non-targets, and is economical both in terms of per-acre cost and container size, for the commercial applicator or the individual landowner.