They are both long, straight boards that run along the lower edge of the roof. However, fascia boards run horizontally, carry the gutters and support the bottom row of roof tiles. Barge boards run diagonally and are located at the gable end of a property.
What are soffits and barge boards and fascias?
Fascias, soffits and barge boards are three such things, which you’ll find around the edge of the roof. Fortunately, they’re pretty simple to understand. Read on as we explain the three features, their differences and how to keep them in the best condition. We’ll start with fascias. These are horizontal boards that your guttering is fixed to.
What is a fascia board?
The fascia board is the long, straight board that runs along the lower edge of the roof. In a downpour the roof of a 3-bed semi could be washing several gallons of water per second into its gutters.
How to prevent moisture ingress of fascia or barge board?
Correct sequencing of fascia or barge board construction where there is no soffit is essential to prevent moisture ingress. Figure 2: Fascia board to wall junction (no overhang). Figure 1: Fascia board abutting clad wall. Figure 3: Fascia board to wall junction (no overhang) continued.
What are the different types of barge boards?
There are different types, naturally, such as square, bullnose and flat. Materials available are wide and varied so you will never be stuck for choice. Maintaining your barge boards is simplicity, but a common mistake is simply placing new boards over old.
What is barge and fascia?
A barge board is the wooden board found on a home that runs up the A frame of a gable. Another way to think of it is a more vertical fascia board. If you're familiar with fascia boards, you know that they run along the eave where the gutter would mount.
What does barge board do?
Bargeboards refer to the fascias located at the gable end or side of a roof. Used to protect the roof timbers of a building, bargeboards can also have a significant impact on the general aesthetics of the exterior of your property.
What is fascia board called?
The fascia board is the one mounted at the point where the roof meets the outer walls of the house and is often called the ROOFLINE. However most people refer to it by the name of the main board that carries the gutter – the fascia or fascias.
Where can you use a barge board?
Barge boards. While fascias and soffits support the guttering of a property, barge boards are attached to a gable to provide added strength, protection and aesthetics. They appear as an inverted 'V' under the edges of the roof verge, protecting the exposed materials much like a fascia.
What's the difference between a soffit and fascia?
An exterior soffit is located on the span beneath the rafter tails, while the fascia is the exposed horizontal band you see at the end of the rafters. These architectural elements found along the eave area do more than just add visual interest and give a finished look to your home.
Why do you need fascia board?
Fascia boards overhang the walls of the building and close the gap between the walls and the roof. The Fascia helps to prevent water and animal ingress into the roof and loft space, as well as creating a more aesthetically pleasing appearance, compared to open or rough ends of roof rafters.
What do fascia boards look like?
0:192:32Fascia Board - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd some of the improvements with fascia material. And here's what I'm talking about this is this isMoreAnd some of the improvements with fascia material. And here's what I'm talking about this is this is a fascia on a house you know it can be these trim boards that you see like you'll have shingles
What wood is used for barge boards?
The most popular wood species for fascia, soffits and barge boards are; Western red cedar, European oak, Douglas fir and Larch. Accoya fascia board is a highly recommended sustainable option that is extremely durable. Utile or Iroko fascia, barge and soffit boards are also very good options.
How do you attach a barge board?
0:553:07DIY Remove & Replace Damaged Barge Boards - YouTubeYouTubeStart of suggested clipEnd of suggested clipLine take the barge balls down and cut the ends using a hacksaw. So if you're needing to join twoMoreLine take the barge balls down and cut the ends using a hacksaw. So if you're needing to join two barge boards you're going to need a joiner.
What is the best material for fascia boards?
Wood: Wood is perhaps the most common selection when it comes to designing a fascia board. Wood designs can bring a pleasing aesthetic value to the home, especially if your home has wooden siding. Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture.
How do you fit soffits and barge boards?
4:1712:53Swish Fascia & Soffit Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipEvery rafter foot now has a hanger securely attached ready for the fascia and soffit fall theMoreEvery rafter foot now has a hanger securely attached ready for the fascia and soffit fall the maximum distance between hanger positions should be 600 millimeters for white profiles.
What is the difference between fascia and eaves?
Eaves—The lower edge of a roof (often overhanging beyond the edge of the house). Fascia—A decorative board extending down from the roof edge either at the eave or at the rake. Felt—The bituminous paper used by roofers, usually made of a combination of asphalt and either paper or rags.
What is fascia board?
The fascia board is the long, straight board that runs along the lower edge of the roof. In a downpour the roof of a 3-bed semi could be washing several gallons of water per second into its gutters. Bargeboard. This is the board that is used on the gable end of a house. Click to see full answer.
Why are barge boards attached to a gable?
While fascias and soffits support the guttering of a property, barge boards are attached to a gable to provide added strength, protection and aesthetics. They appear as an inverted 'V' under the edges of the roof verge, protecting the exposed materials much like a fascia.
What is a Barge Board?
A barge board is the wooden board found on a home that runs up the A frame of a gable. Another way to think of it is a more vertical fascia board. If you’re familiar with fascia boards, you know that they run along the eave where the gutter would mount.
What Size Does a Barge Board Come in?
Sizes vary and you can actually design and build them any size that you want. Typically, you will find a 5.5 inch by 3/4 inch barge board which is commonly known as a one by six. The 1×8 or 1×10 may also be used depending on the type of construction. You may see a 2×4 used in some of the lower quality construction.
Is a Barge Board Considered a Luxury Item?
The barge board does have the ability to make a home look more decorative so it can be thought of as a luxury item. The Dutch style of construction is most common for designing and tailoring and really adding a lot of detail. These designs could be hand carved, laser cut or even custom built like cabinetry, where they have a specific design.
Why are barge boards attached to a gable?
While fascias and soffits support the guttering of a property, barge boards are attached to a gable to provide added strength, protection and aesthetics. They appear as an inverted ‘V’ under the edges of the roof verge, protecting the exposed materials much like a fascia.
Why are fascias important?
Because they hold the gutters and protect the edge of the roof, it’s also important that your fascias, soffits and barge boards are well maintained. One common problem faced on properties with soffits is swallows nesting within the enclosure between the soffit and the house wall.
What is soffit board?
Soffits are the flat boards that cover an overhanging roof from the underside. They’re attached to the lower end of fascia boards and cover the area between the external wall and the fascia to protect the exposed part of the roof. This essentially creates a box around the edge of the roof, which requires ventilation to avoid condensation and decay. Fortunately, most soffit boards have ventilation built in. However, you can also opt for over fascia ventilation, which allows air to flow between the roof and fascia board through the top of the fascia without compromising the protection for the roof.
What are the things that are around the edge of a roof?
And while most people are familiar with the tiles, flat roof decking and gutters, there are some more specific features that seem alien to most. Fascias, soffits and barge boards are three such things, which you’ll find around the edge of the roof. Fortunately, they’re pretty simple to understand.
Can fascia boards be attached to the exterior wall?
When the roof has flush eaves – the edge is in close proximity to the property’s external walls – fascia boards can be attached directly onto the exterior wall. However, when there is a gap – known as closed eaves – the edge of the roof needs a soffit to protect the roof and carry the gutters….
Do soffit boards have ventilation?
Fortunately, most soffit boards have ventilation built in. However, you can also opt for over fascia ventilation, which allows air to flow between the roof and fascia board through the top of the fascia without compromising the protection for the roof.
Fascia boards: the basics
Fascia boards come down from the edge of your roof and sit horizontally around the perimeter. They protect the edge of your roof’s rafters, as well as providing a base onto which guttering can be fixed.
What about soffits?
As mentioned above, roofs that overhang exterior walls will have a gap between the wall and the fascia board. That’s where soffits come in. They are flat boards which cover the gap from the underside. Attached to the bottom of fascia boards, they provide added protection for the edge of your roof, as well as covering up unsightly gaps.
How barge boards differ
Unlike fascia and soffit boards, barge boards are used on the gable of a property. In short, that’s the triangular piece of wall that sits between the slanting sides of the roof – in contrast to the eaves, which are parts of the roof that slope down and overhang the wall.
Looking after fascia, soffit and barge boards
While they might seem trivial, all three types of board contribute to the appearance and function of your roof. With that in mind, they need to be regularly inspected and properly maintained to avoid more serious issues developing.
Speak to the experts
To keep your roof looking good and working well, fascia, soffit and barge boards should be regularly inspected, adequately ventilated, and fully sealed off. Suspect you might have issues with the boards on your roof? Don’t hesitate to get in touch with the experts at DPR Roofing in Huddersfield.
As nouns the difference between bargeboard and fascia
is that bargeboard is while fascia is a wide band of material covering the ends of roof rafters, sometimes supporting a gutter in steep-slope roofing, but typically it is a border or trim in low-slope roofing.
Noun
A wide band of material covering the ends of roof rafters, sometimes supporting a gutter in steep-slope roofing, but typically it is a border or trim in low-slope roofing.
What are fascias, soffits and barge boards?
What are Fascias, Soffits & Barge Boards? There are three additional parts to a traditional roofing system that help to tie everything together, add to visual appeal and help prolong the life of the roof and, ultimately, the building itself.
Why do we need fascias?
The purpose of the fascia is to cover fittings and ensure that they are waterproof and protected. Fascias also help to secure the last row of roof tiles,keeping them securely in place while looking good doing it. Available in a variety of patterns and colours so you can match them to the style of the building.
Where are soffits located?
Soffits can be found on the underside of the fascia boards and their role is to cover the underside of the fascia and this furthers the protection of the wall and roofline from adverse weather conditions. Perfectly visible from the ground, Soffits are designed with aesthetics in mind, further enhancing the overall look. of the property.
What is a soffit?
Perfectly visible from the ground, Soffits are designed with aesthetics in mind, further enhancing the overall look. of the property. Soffits generally include integrated vents that allow cool air to circulate under the roof.
What is the most common type of soffit?
One of the most common soffit types is the hollow variety. Cost effective and relatively simple to put up they are often preferred by the DIY enthusiast. If you do decide to do it yourself, although we do advise that a professional be contacted, you do need to be sure you have all the relevant safety equipment.
Can soffits degrade?
Decayed soffits can have negative effects on rafters, shingle moulds and fascias. There are multiple reasons why soffits can degrade, such as excessive rain and even nesting birds. DIY repairs are not recommended as there are several factors to take into account so it is always advisable to leave repairs to an expert but do ensure that the edges are coated with a water-resistant sealant.
