Here is a chart to help you visualize its price in relation to other materials:
Material | Price per square foot | Average cost (based on a 600 sq/ft drive ... |
Poured concrete | $4 – $8 | $2,400 – $4,800 |
Rubber | $6 – $11 | $3,600 – $6,600 |
Gravel | $1 – $3 | $600 – $1,800 |
Concrete Pavers | $6– $11 | $3,600– $6,600 |
Material | Price per square foot | Average cost (based on a 600 sq/ft driveway) |
---|---|---|
Poured concrete | $4 – $8 | $2,400 – $4,800 |
Rubber | $6 – $11 | $3,600 – $6,600 |
Gravel | $1 – $3 | $600 – $1,800 |
Concrete Pavers | $6– $11 | $3,600– $6,600 |
How much do rubber pavers cost to install?
Rubber pavers cost $2 to $6 per square foot on average. They're easy to install and don’t need a completely flat surface. They're durable against high traffic and slip-resistant. However, the color may fade over time, and they won't increase your resale value.
Why recycled rubber paving?
The durable quality from recycled rubber in our paving product offers a low cost alternative to concrete, cement, pavers and many other surfaces. Children's playgrounds can benefit from the natural shock absorption nature of the rubber.
Is rubber paving cheaper than concrete?
The rubber paving cost is lower than that of concrete materials since installation and materials are cheaper. It’s also easy to maintain and repair. Contractors have tested and proved these benefits of rubber paving, so you know you’re getting a quality paving job. Rubber paving is very durable.
How long does it take to install rubber paving?
In 24 hours you can walk on it and in 3 days you can drive and park your vehicles on it. The installation process can be done by or with the help of contractors. The rubber paving installation costs aren’t as expensive as the cost of other concrete materials since it’s an easier material to maneuver and work with.
Are rubber pavers cheaper than concrete?
They are durable, slip-resistant, and easy to maintain. They are also less expensive at $4.80/sq. ft. compared to newly paved concrete or asphalt at $9-12 sq.
Is rubber paving any good?
Whether it be a sidewalk, driveway, staircase, deck, playground, or any other area, you can count on rubber pavement to be strong and reliable material. It's extremely durable, long-lasting, environmentally friendly, cost-effective, customizable, and safe for anyone and everyone.
How much does rubber coating cost?
Roof coating cost by sealant typeSealant typeMaterial cost (SF)Total cost installed (SF)Acrylic / elastomeric$0.15 – $0.80$0.50 – $3.00Liquid rubber$0.80 – $1.20$1.50 – $2.50EPDM sheets$1.80 – $5.00$3.00 – $11.00Bitumen$0.85 – $1.50$1.00 – $2.502 more rows•Mar 15, 2022
Are rubber pavers good for driveways?
They have a very high slip resistance and it is also an effective material for shock absorption. This makes them the safest choice for paving areas of high-traffic, notably for places for playing and other physical activities. Rubber pavers are also environmentally friendly.
How long does rubber paving last?
20+ yearsLong-Lasting Lifespan Our rubber paving tends to endure in excellent shape for 20+ years! The benefits of rubber paving cannot be understated; it's cost-effective, customizable and family-friendly.
Does rubber paving last?
Rubber paving can last decades when properly applied. Minimal maintenance is required and the durable surface is made to withstand everything from light traffic to heavy vehicle traffic.
How much does liquid rubber roof cost?
There are many liquid roof products on the market averaging roughly $150-$250 for a 4.75 gallon container. A typical container can be used to cover approximately 250 square feet of roofing surface.
How much is a rubber roof?
Rubber Roof Installation Costs The average range of cost to install or replace a rubber roof is between $6,000 and $18,000, with the average being around $12,000. And as you know, all sorts of factors come into play that can affect that price, such as the materials, labor, obstructions, and customizations of the roof.
Is liquid rubber roofing any good?
Rubber roofing is suitable for extreme conditions, giving you one of the most durable and reliable roofs available that typically lasts between 30-50 years. In time, you may find a felt flat roof can pick up moss and algae; the synthetic rubber doesn't support the growth of moss so you are guaranteed a clear roof!
What do you put under rubber pavers?
0:442:34How to Install Rubber Tiles in Patio or Play Areas - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe've laid three inches of 804 or crushed stone we've compacted that into place and then we broughtMoreWe've laid three inches of 804 or crushed stone we've compacted that into place and then we brought in some fines. Or dusters.
What is the cheapest type of driveway?
gravelAggregate, or gravel, is the cheapest and most durable of these four common driveway materials.
Can rubber paving go over gravel?
Rubber paving can be applied directly over a number of surfaces, including asphalt, brick, concrete, roofing membrane, paving stones, tile, wood, and even crushed limestone and gravel.
What is rubber paving made of?
Rubber paving is made out of discarded rubber materials. Most commonly, it’s manufactured from old tires. Installing this kind of paving into your landscaping actually provides you the opportunity to help the environment, keeping the wasted rubber out of a landfill. Helping the planet may not be on your mind when installing new pavement outside your home, but using recycled materials in rubber paving can contribute to saving the environment. You may not think it’s much, but the reality is, you’d be contributing to the lessening of waste in landfills.
Why do you need rubber paving?
It also can allow for grass, weeds, and fungus to grow and damage the concrete further. Rubber paving prevents this from happening since its material has such a stronghold. Not only that but if you’re looking to sell your home, rubber paving will help you do that. It looks good to buyers that the driveway or other outdoor spaces will be properly paved. It also will appeal to families looking for a home that’s safe for children. The safety properties of rubber paving and the grip that comes with it will sway a family more so into purchasing your home.
What is Durability in paving?
Durability is something to look for in a paving product. This isn’t something you want to have to replace or repair often. Instead, you want something to withstand the test of time, no matter the weather or external conditions your paving might endure. Rubber paving has this advantage, and it doesn’t stop there.
What is rubber pavers?
Rubber paving comes with numerous benefits. It’s a super durable material to use since it’s made to withstand all weather conditions and wear that it faces. It comes in numerous colour options, making it easy to match with your home’s exterior and style. With that comes an increase in curb appeal, replacing the looks of outdated or damaged concrete paving. The rubber paving cost is lower than that of concrete materials since installation and materials are cheaper. It’s also easy to maintain and repair. Contractors have tested and proved these benefits of rubber paving, so you know you’re getting a quality paving job.
How to make rubber pavement look more realistic?
For instance, if you wanted a rubber pavement that looked more like gravel, you could mix different colors within the material for a more realistic appearance. Another idea is to do one base colour, and then outline it with a darker, contrasting colour. That way, the pavement will look framed and modern.
Can you put rubber paving on top of old pavement?
Rubber paving can be installed right on top, concealing the old pavement as though it were never there . This saves you money on the cost of installation and labour. That, and it can likely be done in a day or two! With rubber paving, a big project suddenly became and quick, easy, and cheap one.
Does rubber pavement break down easily?
The material is made to expand and contract easily with the change of the weather, that way it won’t crack or show other damages. The rubber pavement won’t break down easily, either. Shovels won’t leave scraping marks on the material.
How much does it cost to dump a 1,000 square foot driveway?
The price for each dirt load comes out to approximately $160 and $121 for each concrete load.
What is the difference between pavers and labor?
Labor. The one cost of any paver installation that will make the biggest difference is the quality of labor. This is where the saying “you get what you pay for” comes into effect If you are looking for a quality paver installation. For guaranteed quality, you should work with installers with the most experience.
What materials are needed for pavers?
When considering the materials needed for a paver installation, you will be looking at the following: 1 Pavers 2 Class II Road Base 3 Geotextile Fabric 4 Bedding Sand 5 Concrete 6 Joint Sand
How much does a stone cost per square foot?
Typically, standard paving stones are priced from $2.53 to $3.69 per square foot, plus tax. Prices vary depending on the manufacturer, style, or texture that you choose. When installing pavers, you will have to account for wasted paving stones.
How much does geotextile fiber cost?
The cost of the fiber is roughly $0.37 per square foot (taxes included).
How much does poured rubber cost?
At $7 to $15 per square foot for materials, poured-in-place rubber works well for playgrounds. The thick, springy material helps prevent fall-related injuries. However, the thicker the material, the more expensive it will be. It does have a higher upfront cost than other materials but requires less maintenance.
How much does it cost to put rubber in a square foot?
On average, poured-in-place rubber costs about $16 per square foot. But high-end products like extra thick material and more complex projects can cost up to $25 per square foot. This number depends on the thickness, color and square footage. Larger surfaces generally cost less per square foot to install than smaller areas.
How much does it cost to install a rubber playground?
Poured-in-place rubber surfacing costs $1,800 to $3,500 to install on a 140-square-foot surface. Expect to spend about $2,200 on average. Poured rubber playgrounds are quick to install, which cuts down on labor costs. Labor falls at about $16 per hour. Some companies charge an hourly rate up to $75 per contractor.
What is rubber stone?
Rubber Stone. Rubber Stone is a brand of recycled tire surfacing that can last 15 years or more. You can purchase it as interlocking mats or poured-in-place material. Consult with your hired contractor to see if this material is right for your driveway.
How much does mulch cost?
Playground mulch costs $6 to $8 per square foot. Both wood and rubber mulch are less expensive than poured rubber in the short term. But, over time, replacing the loose fill as needed costs more.
How much does asphalt cost?
Asphalt paving costs $2 to $5 per square foot , making it slightly more expensive than concrete. Asphalt adapts well to temperature changes and isn’t known to crack. It requires resealing every couple of years.
How much does it cost to build a playground?
The average cost to install a playground is about $500. When it comes to the ground or base, there are many materials available, meaning the final price can vary drastically from $1 to $15 per square foot.
How much does a paver cost?
Pavers cost between $1 and $15 per square foot , with most homeowners spending $2 to $4 per square foot on average depending on the size, material, style, and texture. Paver material choices include clay bricks, concrete, natural stone, cobblestone, rubber, plastic, and more.
How much does porcelain pavers cost?
Porcelain pavers cost $5 to $10 per square foot on average or $12 to $20 per square foot installed. Porcelain pavers support heavy foot traffic and have a slip-resistant matte finish. Their impermeability makes them stain and frost proof and able to withstand de-icing chemicals in northern climates.
What is the difference between cobblestone and interlocking pavers?
A cobblestone paver driveway costs more but lasts the longest, while interlocking pavers provide the best solid surface. A driveway for heavy vehicles costs more, because the base must include 6”– 12” of aggregate compared to the pedestrian 4” – 6”.
How much does it cost to install a paver patio?
A paver patio costs $10 to $17 per square foot to install, with most homeowners spending between $1,900 to $6,800 depending on the size, labor, and materials. The average cost of pavers alone is $2 to $4 per square foot for either clay brick, concrete, or natural stone.
How much does a slate patio cost?
Slate patio pavers cost $5 to $10 per square foot on average or between $15 and $20 per square foot installed. Slate is another stone paver that is usually larger in size and square, making installation faster. Their nonslip properties are excellent for patios that surround a pool.
How much does an interlocking paver cost?
Interlocking paver blocks cost $2 to $8 per square foot on average and typically come pre-sealed. They are installed quickly, can be used immediately, are stronger than a concrete slab, require little maintenance, and last up to 30 years. Modular pavers cost $2 to $7 per square foot on average.
How much does it cost to install concrete slabs?
A concrete slab costs $4 to $8 per square foot and is cheaper than pavers unless you add coloring or stamping. Installing pavers costs $10 to $17 per square foot or about twice as much as laying concrete. Pavers are easier to repair, and concrete slabs are more affordable.
What is rubber pavers?
Rubber Paving - A Traditional Method of Paving. Rubber paving has been used on running tracks, and other applications in Europe for over seventy years. It was introduced in North America a little over 25 years ago.
How to contact BC Eco Paving?
Email BC Eco Paving or call us at for a free paving quote. Call 1-800-609-5408.
Is recycled rubber a non-slip surface?
Our recycled rubber is a non-slip surface, which makes it popular for recreational applications in rainy Vancouver. Ice doesn’t build up on the surface, making it ideal for the Vancouver climate. In an unlikely event of the rubber getting damage it’s easily repairable, and afterward is difficult to notice.
Can rubber be used to resurface concrete?
Yes, rubber is a perfect solution to resurface most existing surfaces like concrete and asphalt because rubber has extreme flexibility, allowing it to withstand both extremes in temperature and ground movements. Which greatly reduces the chances of further cracking.
Is rubber flooring good for playgrounds?
Combined with the non slip benefit from rubber this makes rubber flooring an ideal solution for splash parks, water parks, recreation floors, and playground flooring.
What are the features of rubber tiles?
Material Features. Depreciation. Rubber tiles have an elastic structure that is amortizable, so they can be used for garage or home access roads. Frost resistance. Rubber tiles withstand frost and do not lose their properties when using winter reagents. Drainage properties.
What tools do you need to lay rubber tiles?
You will need them: a marking tool (enough pegs and rope); level and ruler; a knife, an electric jigsaw; a wooden or rubber hammer (a mallet);
What color is rubber crumb?
Dye for the rubber crumb, which gives the coating a certain color (red, green, yellow, blue, etc.). Two types of pigments are used: organic and inorganic, the first is more resistant to UV light and does not burn out under sunlight, but their cost is much higher.
What do you use to remove glue from concrete?
level and ruler; a knife, an electric jigsaw; a wooden or rubber hammer (a mallet); a toothed spatula for applying glue (when laying on concrete); a sponge or rag to remove excess glue (when laying on concrete).
Can you put crumb rubber on boardwalk?
The laying of seamless floors made of crumb rubber can be made on almost any substrate. This can be as a solid coating of cement screed, asphalt, or boardwalk, as well as compacted sand and gravel cushion or natural soil. 2. For a hard substrate, a thinner layer of crumb rubber is sufficient.
Can you use beacons to lay rubber?
If necessary, it is necessary to install “beacons”, which will be used for laying crumb rubber. To give a higher adhesion, a hard surface requires primer with special compositions (you can prepare a primer with your own hands, diluting the polyurethane binder organic solvent to liquid consistency).
Do rubber tiles crumble?
Rubber tiles do not crumble, have high strength and resistance to stress. Operation – easy installation and repair, easy maintenance. Good drainage qualities – water does not accumulate on the surface. Injury safety. Service life is more than 10 years!
How much does it cost to install pavers?
To purchase and install most pavers, expect to pay an average of $8 to $25 per square foot, according to HomeAdvisor. If you choose a high-end stone, the cost could rise to $50 per square foot. Preparing the ground to last a long time and installing the pavers is a time-intensive process.
How much does a paver patio cost?
Paver patios cost between $2,400 to $7,000, or an average of $3,400 nationally, and can boost your property value. A patio is an easy way to dress up a backyard and increase space for entertaining. Concrete is a classic choice, but for a unique, eye-catching patio, consider pavers.
How much does bluestone cost?
Usually, the stones are a much larger size than most common stone pavers, which gives them a smoother, less busy appearance. Due to their size and uniqueness, bluestone typically ranges between $18 and $24 per square foot, including installation. Pavestone is a tumbled concrete paver that can mimic the appearance of bluestone and costs only $0.50 to $3 each.
What is the cost of brick pavers?
A traditional red brick patio is an iconic look in some regions, but other colors like tan or gray can also be used. They range from $0.25 to $4 per brick or $4 to $8 per square foot.
How long do pavers last?
Paving stones are known for their ability to last—up to 50 years is not an unreasonable expectation, depending on stone choice. That’s longer than concrete, which tends to break down, settle, or crack much sooner. Paver patios do not need to be sanded and stained every year like a deck—just spray them with water when they get dirty.
What is the best material for a patio?
Gravel. Gravel is a less expensive option for a patio, yet it’s a high-maintenance choice. The ground will still need to be prepped to drain water and stabilize the gravel layer. Gravel is often used as a base material before some pavers are set, but it can work as the top layer if preferred.
How much does it cost to make concrete look like stone?
If you prefer concrete without the brick look and without the smooth concrete appearance, you could use patterned molds to make the concrete appear like stone (molds can cost between $15 and $100) or have the concrete stamped to look like faux wood or other intricate designs.
How much does gravel cost?
Well-built gravel driveways require light raking and new gravel once or twice a year. Gravel prices range from $10 to $50 per ton, depending on the stone size and type.
How much does it cost to build a driveway?
The cost to build a driveway ranges from $600 to $18,000, depending on the material. The cheapest driveways cost $1 to $3 per square foot for gravel, while standard concrete and asphalt driveways cost $3 to $8 per square foot.
How long does a concrete driveway last?
Asphalt driveways last 15 to 30 years, and concrete driveways last 30 to 40 years on average, depending on the climate and usage. Brick and stone pavers last 25 to 50 years. A cobblestone or gravel driveway lasts up to 100 years if well-maintained.
What is the cheapest driveway material?
The cheapest driveway material is gravel at $1 to $3 per square foot using aggregate made of crushed shells, crushed concrete or asphalt, or pea gravel . Tar and chip seal driveways are the second cheapest at $2 to $5 per square foot.
How much does an exposed aggregate driveway cost?
Exposed aggregate or pebble finish driveways cost $5 to $11 per square foot or $3,000 to $6,600 on average. Exposed aggregate features stones mixed into concrete or seeded on the surface. Natural aggregates provide a textured, nonskid surface in various colors, including pastels, earth tones, and deep reds and blues.
How much does a chip seal driveway cost?
Chip seal driveways cost $1,200 to $3,000 or $2 to $5 per square foot. Chip seal, also called tar and chip, lasts 7 to 10 years. Tar and chip driveways have the durability of blacktop, come in various colors, and feature layers of stone aggregate spread over hot liquid asphalt.
How much more expensive is a circular driveway?
Circular driveways cost 10% to 20% more than straight driveways because building a curved shape requires more labor and installation time. Wrap-around driveways take up more yard space but add curb appeal and provide a way for vehicles to enter and exit easily.