what is the code p0014 for a chevy colorado

by Sheridan Leffler Published 3 years ago Updated 3 years ago

The camshaft(s) is(are) adjusted by the engine computer through the use of an oil control valve(s) (OCV), also called variable valve timing control solenoid valves. When trouble code P0014 is set, it means that the exhaust camshaft in Bank 1 is more advanced than the engine computer has told it to be.Feb 21, 2022

Full Answer

What does the p0014 code on a Chevrolet mean?

| What are P0014 CHEVROLET code possible symptoms? The Camshaft Position (CMP) actuator is attached to each camshaft and is hydraulically operated in order to change the angle of the camshaft relative to Crankshaft Position ( CKP ). The CMP actuator solenoid is controlled by the control module.

How much does it cost to fix a p0014 code?

Most auto repair shops charge between $75 and $150 per hour. | What are P0014 CHEVROLET code possible symptoms? | What is P0014 CHEVROLET code meaning?

What does the p0014 camshaft position actuator solenoid do?

P0014 Chevrolet Description The Camshaft Position (CMP) actuator is attached to each camshaft and is hydraulically operated in order to change the angle of the camshaft relative to Crankshaft Position (CKP). The CMP actuator solenoid is controlled by the control module.

How do I fix code P0014?

What repairs can fix the P0014 code?

Replace camshaft timing control valve solenoid.
Repair wirings to camshaft timing control valve solenoid.
Clean oil lines to VCT or VVT system.
Replace valve control unit (VVT or VCT, for example)
Replace timing belt or timing chain.
Replace camshaft position sensor.

Feb 7, 2022

What causes exhaust camshaft position timing?

The following are the most likely causes: The camshaft's timing is incorrect. The valve control solenoid has failed and is stuck open. The valve control solenoid system's wiring is faulty or damaged.

Will an oil change fix P0014?

In layman terms, P0014 means it's a generic engine code that refers to an advanced or over-advanced exhaust camshaft in bank 1. Replacing your oil and filter usually fixes the P0014 OBD2 Trouble Code!Jan 17, 2020

What can cause a P0014 code?

If your car is showing a P0014 engine code, chances are your car's exhaust camshaft variable valve timing is off. Other factors which can cause the engine code include: Low engine oil. Dirty oil.Feb 7, 2022

Can dirty oil cause P0014?

Can Dirty Oil Cause P0014? P0014 is caused by the position of the exhaust cam, which is why the problem can be traced back to the camshaft phaser and related components, such as the oil control solenoid and the oil viscosity. P01144 can be caused by dirty or poorly maintained motor oil.Nov 30, 2021

Can you drive with code P0014?

While you can still drive around with P0014 registered issues, please don't do it. Driving with it will cause hard starting, erratic idling, stalling, poor engine performance, and increased fuel consumption. Again, if a lousy VVT control solenoid triggers the issue, it may cause other related components to fail.Dec 2, 2021

What is code P0017?

P0017 is the OBD-II generic code indicating that the crankshaft and camshaft position sensor for bank 1 exhaust camshaft do not correlate signals with each other.

How much does it cost to fix P0014?

It can be as affordable as a $50 oil change, a $100 sensor replacement or it can be a $1,000 timing job.Jun 9, 2020

What Does Code P0014 Mean?

The variable valve timing system increases fuel economy and engine performance by regulating when the intake and exhaust valves are opened and closed. The camshaft (s) is (are) adjusted by the ECM through the use of an oil control valve (s) (OCV) also called variable valve timing control solenoid valves.

How Serious Is Code P0014? – Severe

This trouble code severely impacts the drivability of your vehicle. The most common problems consist of increased engine stalling, rough engine idle, lowered fuel economy, and rattling/knocking noises from the engine. Continuing to drive the vehicle in this condition can cause severe damage to multiple internal engine components.

Code P0014 Common Diagnosis Mistakes

Replacing sensors or components without any indication of a problem with the sensors or components.

Estimated Cost of Repair

For error code P0014, one or more of the below repairs may be needed to solve the underlying issue. For each possible repair, the estimated cost of repair includes the cost of the relevant parts and the cost of labor required to make the repair.

Why is my car getting a P0014?

Code P0014 can be triggered by one or more of the following issues: A low engine oil level or contaminated oil. A faulty oil control solenoid. A failed camshaft actuator (aka phaser)

What does P0014 mean?

Code P0014 means your car’s computer detected a difference in the desired camshaft position angle and the actual camshaft position angle. What Does the P0014 Code Mean?

What is the B part of a DOHC engine?

As for the ‘B’ part of the code, it indicates the affected camshaft. In a Dual Overhead Cam (DOHC) engine, it is the exhaust camshaft. In V6 or V8 engines, it is the exhaust cam for bank 1, the cylinder head with number one cylinder. And that brings us to the Bank 1 portion of the code. Bank 1 refers to the side of the engine ...

Receiving Helpdesk