Step 4: Applying Thompson’s Water Seal
- Put on your protective gear before you apply Thompson water seal with sprayer.
- Take off the plunger tube.
- Mix the product well and then fill the spray can with Thompson’s water seal.
- Replace the plunger tube.
- Slightly tighten it down until you feel resistance. Do not overtighten it.
- Now you need to depress and release the plunger.
- Pump it up until you feel resistance.
- Do not over pump once you’ve felt resistance.
- Spray Thompson water seal all over your deck.
- Now let it dry. This may take up to 24 hours before the deck thoroughly dries.
How to apply Thompson WaterSeal?
Step 4: Applying Thompson’s Water Seal
- Thompson’s water seal
- A garden sprayer to apply the sealer
- Long sleeves, pants, glasses, and safety glasses to prevent chemicals from getting into your skin
Can you put polyurethane over Thompsons water sealer?
Other sealers or clear finishes will not adhere well to a Thompsons stain and may result in the topcoat failing prematurely. Most likely the clear sealer or polyurethane will end up peeling and flaking off the stain.
How to open Thompson water seal can?
The gallon or 5 litre can, you pull the plastic ring on the top, this pulls a pouring spout from inside the can, once that is done, turn the ring anti clockwise and you Will find its threaded and will undo and can pour out the contents into whatever you are using to apply the sealer to.
How to apply Thompson water seal to a wooden deck?
Step 5: Using a Paint Pad
- Pour the sealer into a deck.
- Dip the paint pad into the seal.
- Bring the seal onto the tray area.
- Start at one corner and work from one end to another.
- Apply the sealer parallel to the deck boards.
- Now allow the deck to thoroughly dry. Thompson water seal dry time takes about 24 hours to dry thoroughly. ...
Can you apply Thompson's water Seal with a sprayer?
Answer: The manufacturer of Thompson Water Seal recommended that you use their product with a plastic sprayer with a brass wand, such as our Chapin Premier sprayer. There are no concerns about it eroding any of the seals inside of it.
What is the best way to apply Thompson's water Seal to a fence?
0:261:33Thompson's WaterSeal Waterproofer Plus Clear Wood Protector - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart by applying the coating to the outer rails. And trim surrounding your project with one simpleMoreStart by applying the coating to the outer rails. And trim surrounding your project with one simple coat cover the main surface evenly. Making sure to plan the route for your exit.
How many coats of Thompson Water Seal do I need?
One coat is enough, but if more color is desired, a second coat can be applied within two hours before the first coat has dried. With Thompson's® WaterSeal® Waterproofing Stains, you can clean your tools with soap and water.
Does Thompson Water Seal need to be shaken?
Shake or mix thoroughly before and occasionally during use. A small trial patch should be tried before application over the entire surface. Only one light coat is necessary in most applications. Apply by brush, roller, dipping, or sprayer.
Can you apply Thompson's water seal with a roller?
Q: What is the best way to apply Thompson's® WaterSeal® cleaners? The fastest way to apply is with a pump-up sprayer (using a coarse setting), but you can also apply with a brush or a roller. You should apply liberally.
Can you use a roller to seal a fence?
If using a roller, opt for a medium nap roller cover, then fully saturate the nap with the stain. Apply the stain in two- to three-foot sections of the fence at a time, taking care to back-brush, or re-paint over uncovered areas left by the previous stroke, with a wide brush.
How long does Thompson Water Seal still tacky?
The sealed surface is likely to dry eventually, after two to three days. However, sometimes it might have sticky residue for an entire week if the humidity is significantly high.
How long before Thompson's water seal gets wet?
Allow at least 24 hours to dry; however drying time will vary depending on the substrate, temperature, and humidity. When completely dry, perform the splash test to determine if second coat is necessary. Allow 45 days drying time before applying latex paint over Thompson's® WaterSeal® Clear Multi-Surface Waterproofer.
How long does Thompson Water Seal last?
4 yearsIf applied correctly, Water Seal will last up to 4 years. This is dependent on conditions such as orientation of the wall and local climate.
How do you clean brushes after using Thompson's water Seal?
After waiting the recommended time, use a synthetic, stiff bristled brush to scrub the surface. Then use a garden hose or pressure washer to rinse away the residue.
How many coats of sealer should you put on a deck?
Overly thick sealant is prone to peeling and chipping, so avoid oversaturating the surface by applying only one coat of sealant at a time. In most cases, all you'll need is one coat, but should you wish to apply a second coat, wait at least 24 hours.
Is one coat of Thompson's water seal enough?
Yes. Only one coat of this sealant is enough to protect your deck from mold, mildew damage, and rain. Even more, one coat ensures great UV protecti...
Should I apply Thompson's water seal with a pump sprayer?
Yes. A pump-up sprayer is the fastest method of applying this sealant. However, you can use a paint pad, a brush, or a roller to apply it, and you...
Does Thompson water sealer protect decks from mold?
Yes. Thompson's water seal protects your deck from both mildew and mold damage.
Can you apply a sealant with a roller?
Although it is recommended to use a pump-up sprayer, you can also apply this sealant with a roller, a brush, or a paint pad. Keep in mind that you'...
How long will the Thompson water seal last?
On average, Thompson's water seal will last for about 5 years. Depending on the weather patterns in your area, this deck sealer might need your att...
How To Apply Thompson Water Seal On Your Deck
Decks are a considerable investment. Not only do they add value to your home, but they’re also a great place to spend time with friends and family bonding over a barbecue.
Benefits Of Thompson's Water Seal
Thompson’s Water Seal has been in the market for a very long time, and it’s proven to be an excellent product.
How To Apply Thompson Water Seal
A coat of Thompson’s water seal is important for your deck. It stops the water from getting in and makes it last longer.
1. Before You Apply Thompson Water Seal
Before getting started on any project, it’s best to clean your workspace. An organized surface increases your productivity when applying the sealer for the first time.
2. Apply Thompson Water Seal On The Clean Surface
When you apply Thompson water seal, it’s up to you whether you want to use a sprayer or a paint pad. A garden sprayer makes the job easier, but if you don’t have access to one, a piece of cloth or even a small brush could work just fine.
Wait For The Water Seal To Dry
Give your Thompson’s water seal at least 24 hours to dry thoroughly. Depending on the weather, drying time may vary.
Conclusion
Thompson’s Water Seal is a great way to protect your deck and keep it looking new.
How long does it take for Thompson's Waterseal to dry?
However, you must wait for the first coat to dry (typically about 2 hours) and apply the second coat within 4 hours of applying the first coat.
What is the difference between a stain and a sealer?
Generally speaking, a sealer does not color the wood and is designed primarily for protection against moisture, while a stain/sealer includes pigment that helps protect against the damaging effects of sunlight (UV degradation) in addition to sealing out moisture. There are three basic categories of sealers or stains: clear sealer, semi-transparent stain, and solid stain. Keep in mind that all deck stains are also sealers.
How often should I reapply semi transparent stain?
It also must be reapplied more often than most stains, typically every year. Semi-transparent stain adds some color to the wood and offers a moderate amount of UV protection. It is the most common type of deck finish because it strikes the best balance between UV protection and a natural wood look.
Can deck sealer cause a fire?
Deck sealers and stains may contain solvents that can cause rags to spontaneously combust. Dispose of soiled rags in a sealed, water-filled container or through another safe disposal method. Oily rags left in direct sunlight can start on fire in a matter of minutes.
How long does it take for a sealer to dry?
This will give it the necessary time to dry completely before it is able to get wet. If rain has occurred prior to application, allow at least four to five days for the surface to dry before you start applying the sealer. With spray application, some pigmented stains can clog the tip of the sprayer.
Why use a sealer on a deck?
The primary purpose of a sealer is to provide dependable protection for the surface of your deck.
What is the difference between clear sealer and semi transparent stain?
Overall, the solid stain is much thicker and can offer the most fortification for wood. The clear sealer will take on the color of the wood and provides minimal protection against sunlight. On the other hand, semi-transparent stain can potentially modify the appearance of the wood on your deck.
How to clean a plastic sprayer?
To effectively clean your plastic sprayer after application, run mineral spirits through it first and then follow up with water. Quick Note: While a spray application may be your preferred method to apply Thompson’s water seal to your deck, fencing, or another surface, for railings, consider painting it on with a brush.
Can you use Thompson's water seal with a sprayer?
The application technique that you choose will all depend on your own personal preference and particular situation. To apply Thompson’s water seal with a sprayer, you can use a garden sprayer with a hose or a pump sprayer. However, the manufacturer of Thompson’s water seal recommends that their product be used with a plastic sprayer ...
Can you power wash a deck?
Any debris left on the surface can prevent the sealer from penetrating the edges of the decking boards. In addition to sweeping, you should give your deck a good power washing.
Does Thompson's Water Seal protect decks?
Thompson’s water seal can not only protect your deck from moisture , but it can also defend the surface against any harmful effects of frequent exposure to direct sunlight. Most often, the easiest way to spread waterproofing products is by using a sprayer.
How do I apply Thompson's Water Seal?
Pour Thompson's Water Seal into a paint tray. Using a paint pad and a 4-inch paint brush, apply sealer to the deck. Work the pad or brush in the direction of the wood grain and be sure to coat all sides, including the underside of the wood, where possible. Apply two coats within a 24-hour period. Advertisement.
Why seal outdoor patios?
Sealing outdoor features such as decks, patios, pathways and fences is essential to prolonging the life of the items. Wood quickly degrades when exposed to the weather and patios are subject to staining if they aren't sealed. It makes good sense to protect these expensive landscaping features through routine maintenance such as applying ...
Why Thompson Water Seal Does not Dry
High humidity or rain can cause the Thompson water seal not to dry in many cases. The sealant may also take longer to dry if you apply it in excess or if the surface already has a previous one coat of sealant on it.
Common Causes for Thompson Water Seal not Drying
Various reasons can cause Thompson water seal waterproofing stain to remain tacky for longer than expected. This section examines the common culprits to keep an eye out for.
How Long Does Thompson Water Seal Take To Dry
Thompson Water Seal drying time is approximately 24 hours if the ambient temperatures, humidity, and substrate are optimal.
How to Fix Thompson Water Seal Problems
Thompson’s waterseal products are reliable for the most part. But when the conditions are unideal, things can go awry.
How to Avoid the Problem of Thompson Water Seal not Drying
Instead of waiting to deal with the tacky deck surface after applying Thompson’s sealant, you can take measures to ensure the issue does not occur. Here are five tips for you.
Benefits of Using Thompson Water Seal
Thompson’s water seal can offer the desired results if used correctly. Here are some of the reasons you may want to consider using the product on your patio or decking boards.
FAQs
Thompson’s WaterSeal is a multipurpose product formulated for use on wood, concrete, and brick surface. The formula has remained the same for years, meaning you can get the same results each time.
