What is T1-11 plywood?
T1-11 is often available with either a rough or smooth finish, which is important to consider when stocking up on project materials. In addition, this type of plywood is cut into practical panels, often with stylish exterior grooves that make board-and-batten and shiplap construction easy.
Which is better OSB or plywood T1 11?
However, the plywood version of T1-11 is far superior overall to the OSB version because of its greater durability and the variety of finishing options it offers. Plywood T1-11 is also known simply as plywood siding.
What are the dimensions of T1 11 8 inch plywood siding?
Plytanium Plywood Siding Panel T1-11 8 IN OC (Nominal: 19/32 in. x 4 ft. x 8 ft.; Actual: 0.563 in. x 48 in. x 96 in.) Plywood siding is an all-wood exterior-grade panel. It is ideal for siding applications from new home construction, utility buildings, planters, dog houses and other remodeling or...
What kind of wood is used for T1 11?
Lap styled T1-11 can be ordered with beveled or square edges. Southern pine is a popular choice for T1-11 siding. Cedar, Douglas-fir and redwood are also used to create the siding. A mix of these and other wood species may be found in T1-11 oriented strand board siding.
What is T1-11 used for?
Plywood T1-11 is also known simply as plywood siding. A versatile material, it can be stained to simulate a natural wood look, or it can be primed and painted. Additionally, T1-11 plywood siding can be purchased in either sanded or roughhewn varieties, depending on the finished look desired.
Is T1-11 better than plywood?
Durability Comparison T1-11 Siding: The less expensive OSB grade does not hold up well to exposure to water and over time it will probably expand and warp. It is also susceptible to rot and general wear and tear. The plywood grade is more expensive but it does hold up better than OSB.
What is the difference between T1-11 and plywood?
T1-11 is a cheaper solution for a strong wood siding for a shed, but it will cost you more in the long run. Wood sheds used to be made with T1-11 siding, also known as plywood. While T1-11 siding is cheaper, it cannot stand up to the elements of mother nature as well as LP® wood siding and requires yearly maintenance.
Why is T1-11 cheaper than plywood?
There are two types of T1-11 siding. Plywood and OSB (oriented strand board). The OSB is the cheaper of the two. The OSB is less expensive because it is wood flakes or strands glued and pressed together and a little lower quality than plywood.
Do you need Tyvek under T1-11?
Do I Need Tyvek Under T1-11 Siding? T1-11 is both a siding and a sheathing and can be fastened directly to the exterior face of the studs. House wrap like Tyvek or tar paper provides a wind and moisture barrier which can be beneficial depending on the purpose of the structure it is used on.
Does T1-11 need to be painted?
Personalization. The other downside of OSB T1-11 is you can't stain this siding. It must be primed and painted, taking away one of the primary reasons homeowners choose to go with this particular siding material.
Do you nail T1-11 in the grooves?
Siding manufacturers make T1-11 siding, a five-ply exterior-grade plywood siding, in 4-foot by 8-foot sections with a grooved surface and shiplap edges. T1-11's grooves and shiplap edges run parallel to its 8-foot-long edge. The T1-11 siding's 1-inch-wide, 1/4-inch-deep grooves are spaced 11 inches apart.
Is T1-11 waterproof?
This type of plywood siding is injected with rosins and other chemicals, under pressure, to make it waterproof and protected against termites, rot, and fungal decay. It is the best version of T1-11 siding as it lasts considerably longer. Both Plywood and OSB T1-11 siding should be treated or primed.
Is T1-11 tongue and groove?
All types of T1-11 siding have outer edges with 3/8-inch wide lips on the long sides, designed to overlap the piece that was installed previously. This is not a tongue-in-groove joint, but rather a lap joint. Panels are always installed with the grooves running vertically.
What can I use instead of T1-11?
LP SmartSide is an engineered wood product that is more weather-resistant than T1-11 siding. It is less susceptible to rot, fungal decay, insect damage and thus requires less maintenance. LP SmartSide is, overall, a better cladding solution for most people.
How do you seal a T1-11?
Trim the siding with one-by-four-inch wooden trim, covering the gaps around windows and doors, under the soffit and on the corners of the house. Nail the trim with two-inch galvanized nails, then caulk around it with acrylic latex caulk.
How do you hang T1-11?
0:042:17How To Install T1-11 Siding - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing a pneumatic nailer set the pressure at 90. Psi. Place the siding in the saddle of the dodgeMoreUsing a pneumatic nailer set the pressure at 90. Psi. Place the siding in the saddle of the dodge hangar. Bottom. Let the Dodge hangers take the weight of the material off of you for our uniform.
What is a T1-11?
For most homeowners and homebuilders – even first-time homeowners looking for an entry-level DIY project – T1-11 is a simple, unintimidating material that makes construction projects fast, easy, and affordable.
What is T1-11 used for?
Commonly used for siding, T1-11 has also been a popular material choice for other DIY projects, including tool sheds, dog houses, duck blinds, and interior ceilings. This widely used building material came onto the scene in the 1960s, and it was quickly adopted as one of America’s favorite home building materials for many reasons.
What are the disadvantages of T1-11 siding?
Yet by far, the most notable disadvantage of T1-11 siding is that it’s susceptible to water damage and long-term exposure to the elements. Because of its plywood composition, untreated T1-11 siding can really take a hit from moisture.
How much does it cost to stain a T1-11?
If starting with untreated T1-11 siding sheets, staining can cost upwards of $600, depending on the surface area of the structure.
How much does a T1-11 panel measure?
Typical T1-11 siding has an edge measuring 3/8 inches where the next panel will overlap to create seamless continuity.
What is the advantage of T1-11?
Image Credit – lancasterbarns.com. Another advantage of T1-11 is that it’s quite easy to work with. Because it’s a plywood-based material, it’s fairly simple to cut and maneuver without using fancy, expensive, or job-specific tools.
Is T1-11 plywood strong?
Because it consists of several thin wood layers that are bonded together, T1-11 plywood siding is considered to be a fairly strong siding option. Whether you’ve seen it advertised as T1-11 ...
What is a T1-11?
T1-11 is a type of siding made of plywood, meaning it’s a material made from thin sheets of wood veneer. These are glued together to give you the look you see. It also means that this is an engineered type of wood.
What is T1-11 siding?
In the pursuit of the answer to the question of what T1-11 siding is, is that it’s an engineered wood siding product that can help add protection to your structure and given its natural characteristics is often used on sheds and barns.
What size nails are needed for T1-11?
For thicker material, the size of the nails is usually 8d, while thinner material will only require smaller nails.
What happens if you don't use nails on T1-11 siding?
Without the use of good fasteners, in this case the nails used for the T1-11 siding, the material is prone to getting lose, allowing air leaks to arise and cause the range of problems that moisture inside the material could be providing to your structure.
How much does T1-11 siding cost?
This sheet of T1-11 siding costs $33 per sheet.
How long has T1-11 been used as siding?
While originally being developed as a temporary solution before intended to be replaced or having siding added on top of it, some homeowners report having left it as their main siding for 30 years.
What type of tree is used in T1-11?
The types of tree that commonly go into the production of T1-11 include southern yellow pine and Douglas fir, with the first one being a very affordable option. It’s also commonly made with vertical grooves and to increase its strength, the ends are lapped.
How thick is T1-11 siding?
You can find T1-11 siding in sheets that are 48 inches x 96 inches or 48 inches x 120 inches. It comes in thicknesses of 3/8 of an inch, 5/8 of an inch and 3/4 of an inch.
What is the difference between OSB and T1-11 siding?
There are two types of T1-11 siding. Plywood and OSB (oriented strand board). The OSB is the cheaper of the two. The OSB is less expensive because it is wood flakes or strands glued and pressed together and a little lower quality than plywood. Plywood is stronger and will hold up in the weather a little better with either type though you'd need ...
What happens if OSB T1-11 is wet?
If the OSB T1-11 siding gets wet, it swells and expands, flaking, chipping and eventually will rot. T1-11 will last and stay beautiful if adequately installed, painted or stained, sealed and maintained. It has gotten a bad rap due to improper installations when it is used where it is not recommended, such as roofs and decks.
Is plywood stronger than paint?
Plywood is stronger and will hold up in the weather a little better with either type though you'd need to put an excellent all-weather stain or paint to protect it. There are a few finishes, depending on the manufacturer, you will find T1-11 is available in to purchase. You can get it is a smooth finish or a rough more rustic finish.
Is T1-11 siding good?
Even though T1-11 siding has gotten a bad reputation, it is a great product that is strong, durable and highly functional if appropriately maintained. As mentioned previously sealing, staining, painting, and maintaining it will allow it to last the full term of its life span.
Is T1-11 siding still available?
Today engineered wood, vinyl, and composite siding are more popular, though T1-11 exterior siding is still available.
Does OSB T1-11 siding rot?
OSB T1-11 siding has more issues with water because of how it is manufactured. It is made with wood strands and flakes and is treated with a resin to bind it together when pressure is applied in the process. If the OSB T1-11 siding gets wet, it swells and expands, flaking, chipping and eventually will rot. T1-11 will last and stay beautiful ...
