Full Answer
Why use silverboard?
Why Use SilveRboard? SilveRboard has exceptional long-term R-value retention as well as increased thermal resistance in lower temperatures. When the joints are taped and sealed it can function as a vapor barrier. Each panel is easy to handle due to the low weight and can be easily cut.
What is the Silver Surfer's board?
The surfboard has been linked to the Silver Surfer ever since, and has always found its way back to its master, despite having been stolen by Doctor Doom, on one occasion. The Silver Surfer's board is a construct of unknown materials created by the Surfer's former master, Galactus.
What is silverboard acoustic?
SilveRboard acoustic is a do-it-yourself (DIY) nonstructural, rigid insulation board made from closed cell expanded polystyrene (EPS) with a layer of reflective metalized polypropylene film laminated on both sides.
What is silverboard graphite?
SilveRboard Graphite has a high R-value and an exceptional long-term R-value retention. It also provides increased thermal resistance in lower temperatures. The perforated boards provide high vapor permeance allowing walls to dry out and can act as a second plane of protection when taped and sealed.
What is SilveRboard made of?
SilveRboard is a rigid insulation board made from Expanded Polystyrene (EPS) covered with a layer of polypropylene reflective lamination on both sides. This highly effective combination of materials offers high compressive strength and great thermal performance when used in below grade and under slab applications.
What is R-value of silver Board?
R- 1.5, 0.5-in x 4-ft x 8-ft Faced Fiberboard Board Insulation with Sound Barrier.
How do you use a silver board?
0:071:51SilveRboard Rigid Foam Insulation - YouTubeYouTubeStart of suggested clipEnd of suggested clipBoard silver board is a flat sheet insulation with a reflective lamination that reflects radiantMoreBoard silver board is a flat sheet insulation with a reflective lamination that reflects radiant energy keeping heat outdoors in summer. And holding it in during winter.
Is SilveRboard good for soundproofing?
SilveRboard Acoustic Rigid Insulation It offers great sound attenuation and thermal resistance properties when installed in wall assemblies.
Which board is best for insulation?
Polyurethane (PUR) is one of the most efficient insulation materials on the market. PUR is available in the shape of insulation boards or foam. However, the boards have a better insulation value than the foam variant. Moreover, these boards guarantee a certain thickness in advance and nothing has to be taped over.
Do you need house wrap with SilveRboard?
No House Wrap Needed SilveRboard XS has been specifically engineered for exterior wall sheathing application on wood or steel frame construction. The reflective laminated surfaces are micro-perforated so that the insulation materials can “breathe,” offering both water vapour permeance and an air barrier.
Which rigid foam insulation is best?
Polyisocyanurate: Known as polyiso for short, polyisocyanurate foam has the highest R-value per inch (R-6.5 to R-6.8) of any rigid insulation.
What is polypro insulation?
PolyProTM sheathing for cavity wall applications is a rigid insulation consisting of high performance closed- cell expanded polystyrene (EPS).
How do you cut a SilveRboard?
0:451:26Cutting Rigid Insulation - YouTubeYouTubeStart of suggested clipEnd of suggested clipLevel up against it this is my straightedge. And that's gonna guide the side of the blade. As I runMoreLevel up against it this is my straightedge. And that's gonna guide the side of the blade. As I run it along to make my cut.
Is Styrofoam a good sound blocker?
The petroleum-based plastic is also an effective insulator and shock absorber, so if you've ever asked if styrofoam absorbs sound, you're not too far off the mark. Styrofoam is better able to condition sound when it's used with denser materials that have greater mass.
Is Styrofoam good for sound proofing?
Practical Uses. Styrofoam insulation is the most effective Styrofoam product for reducing sound in a room or environment. The insulation covers the walls from the inside and offers optimum protection.
Is pink foam board good for soundproofing?
Styrofoam is not good for soundproofing. Used by itself as a sound conditioning panel it doesn't do much, however, molded into a quadratic diffuser or laminated to denser material, and it improves sound quality.
About GPS Graphite Polystyrene Insulation
High performing and cost effective non-structural graphite polystyrene (GPS) rigid insulation board for exterior wall applications on wood or steel frame construction. The expanded polystyrene (EPS) core is embedded with graphite particles which increase the thermal performance, compared to conventional EPS.
Expanded Polystyrene Embedded with Graphite Particles
SilveRboard® Graphite XS can be used as the second plane of protection under exterior cladding when the joints are properly taped and sealed, eliminating the need for an additional membrane. The laminated film comes micro perforated by default (denoted by XS) but is also available without perforations by special order.
Graphite Polystyrene (GPS)
Graphite is the most stable form of carbon. It is naturally occurring and chemically inert. When embedded in the polymer matrix it acts as a reflector of radiant energy giving the material its distinct gray color and improved thermal performance.
Product Benefits
SilveRboard® Graphite has a high R-value and an exceptional long-term R-value retention. It also provides increased thermal resistance in lower temperatures.
Testimonials
Due to its light weight and job site durability, installers can easily handle SilveRboard® which results in a lesser breakage rate compared to other products.
