What does the recirculate setting on a pool filter do?
The recirculate setting on a swimming pool filter is actually used to bypass the filter mechanism. Recirculate allows the water to flow out of the pool and back into it again without running through the sand or diatomaceous earth in the filtration system.
What does recirculate mean on a pool?
Recirculate allows the water to flow out of the pool and back into it again without running through the sand or diatomaceous earth in the filtration system. Additionally, can you shock a pool on recirculate?
What is the recirculate mode on a pool pump?
In the Recirculate mode the solid debris remains inside the pool while the chemicals are circulating. These can then be vacuumed to waste. There are instances when a part of your pool sand filter is broken and it is not filtering.
When to use recirculate or sand filter?
Sand - I use recirculate at the very beginning because live algae clogs faster than dead algae...Flow stops on several of my pools with sand filters if I set to filter with live algae, straight sand, no DE addition.
What does recirculation mean on a pool filter?
What is recirculation in a pool?
When would you use recirculate on pool filter?
Recirculate - This setting is used to troubleshoot problems with the filter sand and is especially useful if you are battling an algae bloom. The water will circulate in the pool normally, but will bypass the filter sand.
Should I run my pool pump on filter or recirculate?
You should run your pump/filter as long as it takes to keep the pool clean. Some pools have great circulation combined with low use, therefore run times can be quite short. Other pools have lousy circ systems and huge bather loads and even 24/7 filtration has trouble keeping up.May 27, 2009
How long should you recirculate your pool?
Be sure to run your filter for at least 6 hours, but shoot for 24 hours to several days, if your pool is particularly dirty or has algae, to properly circulate the chlorine and clean the water.
How often should I recirculate my pool?
Overall, the lessons learned today is you should run your pool pump an average 8 hours a day to properly circulate and clean your water. The pump should push your entire pool in gallons in this 8 hour period of time. Residential pool water only needs to be turned over once daily to have proper filtration.
How do I increase the free chlorine in my pool?
Raising pool chlorine can be much easier than trying to lower chlorine levels. Simply adding chlorine in the form of chlorine tablets, granular chlorine, liquid shock or powder shock will increase the total amount of chlorine within the pool.May 28, 2014
How long should you backwash a pool?
2 - 3 minutesOpen the air bleeder assembly on your filter and turn pump on. Watch the pressure gauge for spikes. After the hose fills with water, backwash your sand filter for 2 - 3 minutes, or until water runs clear.
How do I make my pool water crystal clear?
1:0213:39HOW TO KEEP YOUR POOL WATER CRYSTAL CLEAR - YouTubeYouTubeStart of suggested clipEnd of suggested clipVery simple just pull your basket. Out and dump your basket out daily. You don't have to get thisMoreVery simple just pull your basket. Out and dump your basket out daily. You don't have to get this perfect every time. So i do that daily. I also take my net try to daily come out here.
How do swimming pools circulate water?
How Does It Work? In a pool circulation system, water is drawn from the pool through skimmers and drains by a centrifugal pump. The water passes through a basket in the skimmer and in front of the pump to remove large debris before it gets to the pump's impeller.
Do you vacuum a pool on backwash or waste?
If you do have this option, it is highly recommended that whenever you have algae, you will need to vacuum to waste. This option allows you to vacuum the algae up and send it out through the backwash line, avoiding getting algae into your filter sand.Sep 6, 2019
Is it OK to run pool pump 24 hours a day?
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
What is the best time to run a pool pump?
The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.
How many hours a day should you run your pool pump in the winter?
4-6 hours aDepending on the size of your pool, we still recommend you run your pump run at least 4-6 hours a day during the fall and winter months. The daily cycle can be divided into multiple cycles, but each cycle should be no shorter than 4 hours, for all the water to pass through the filter at least once.
What is the filter setting on a pool?
The "Filter" setting is used for light to moderate levels of pool sediment. Similar Asks.
What is pool shock treatment?
Performing pool shock treatment will lower the potency of chlorine, making you use either twice as much chemical, or render your shock treatment ineffective. What setting should pool filter be on when vacuuming? For routine vacuuming, the filter valve is left in the normal “Filter” position.
What is the filter setting in a pool?
Filter Setting. The filter setting is used to filter the water through the sand. It is the pool filter valve positions setting that your filter will spend most of its life on. Mostly it will be used when the pool pump runs on your timer to keep the water in the pool clean. The filter setting is also the one you will use ...
What does a pool filter rinse do?
What does rinse do on a pool filter is probably the most misunderstood setting. The pool filter rinse setting is used after backwashing the sand filter and it is used to clean the sand or other filter medium in the filter housing.
What is the backwash setting on a pool pump?
Backwash setting on pool pump. You use the backwash setting to clean the sand in the filter, often immediately after you vacuum the pool. The backwash setting will be the multiport valve position you will use the second most frequently, after the filter setting. It works by the water being redirected the reverse way through the sand filter.
How many settings are there on a pool sand filter?
But, like most things, it is pretty simple once you know. You will soon understand what all of the pool filter valve positions mean. There are normally 6 different pool filter settings on a multiport valve which are ...
How long should I run a pool pump?
You normally run the pool pump for between 30 seconds and one minute on the rinse setting. The water goes to waste when on ...
Why do I need a closed setting on my pool pump?
The closed setting shuts off all water flow. It can be used for the following two reasons: If your pool will not be used for some time, perhaps if it is empty or during the winter. When you want to empty the strainer basket that traps leaves etc before the water enters the pump.
How does a sand filter work?
It works by the water being redirected the reverse way through the sand filter. So after leaving the pump it goes into the bottom of the filter and travels up through the sand, dislodging the dirt and debris as it goes. The water containing the debris then goes to the waste pipe and out of the system.
Do all pools have a waste setting?
All pools should have a waste setting at the very least and ideally a recirculate setting too. Just my unsolicited 2 cents. I have a special method for vacuuming above ground pools that don't have waste/recirculate settings. People are amazed when they see it. Every time.
Should I use a pool filter at all times?
If you are always available to take care of the pool then you might as well filter at all times. If your available time is limited to say specific times of day, then you want to use recirculate judiciously so that the filter only needs backwashing/cleaning at those times of day.
What does recirculation mean on a pool filter?
Most of the time, you will want to keep the unit set to “Filter,” which will pull water out of the pool, filter it and send the filtered water back into the pool. Many filters also have a “Recirculation” or “Auxiliary Circulation” ...
What is recirculation in a pool?
The recirculate setting on a swimming pool filter is actually used to bypass the filter mechanism. Recirculate allows the water to flow out of the pool and back into it again without running through the sand or diatomaceous earth in the filtration system. This setting is used infrequently, but is helpful when you want to mix newly added pool ...
