How does the survey description travel through the property?
The survey description then "travels" by distance and direction or degrees to a corner of the property being surveyed, which is the point of beginning. The description travels around the subject property until it returns to the point of beginning, whereby the Tract is enclosed. "You have an excellent service and I will be sure to pass the word."
What are the physical markings used in surveying?
Due to the nature of their work, a surveyor uses numerous physical markings while surveying a property. These markings include flags, tape, and stakes, which may be color-coded or marked with acronyms. This is a short list of some of these markings provided by the Fractracker Alliance.
What is the point of beginning in surveying?
The Point of Beginning is a surveyor's mark at the beginning location for the wide-scale surveying of land. A surveyor begins at a well-known landmark, such as the center point of a street intersection.
What is a survey plat and how does it work?
A survey plat is a drawing prepared by a licensed land surveyor showing the actual location of a parcel of property.
What does PC and PT stand for in surveying?
PC - Point of curvature. The point at which a straight line begins to curve, i.e. the point of tangency to the curve. See PT. PCC - Point of compound curvature. The point where curves of different radii meet.
What does FIP mean in surveying?
FINISHED FLOOR ELEVATION. FIP. FOUND IRON PIPE (AS LABELED) FIR.
What does OHE mean on a survey?
(C) CALCULATED DATA. OHE OVERHEAD ELECTRIC.
How do you read survey measurements?
Degrees, minutes, and seconds are the units of measure for property survey bearings. For example, N 38° 03' 09" E would translate as 38 degrees, 3 minutes, 9 seconds from the north to the east. The boundary lines, or "legs," are often denoted in feet and listed directly below or after the bearing.
What is PCS in land title?
Ips – Irrigation project subdivision. Psc – Cadastral Surveys by private enterprise. Csd – Cadastral Surveys by Bureau of Lands.
What is hub and TAC?
LINGO: The term "Hub and Tack" describes the process. of a Professional Land Surveyor in the field. determining points by placing wooden hubs in the. ground.
What is RD in construction?
RC: Reinforced Concrete. RD: Roof Drain, Round, or Receptacle Distribution Panel. R.D.L.: Roof Drain Leader.
How many feet is a survey rod?
Rod (unit)rod1 rod in ...... is equal to ...imperial/US units161⁄2 survey ftmetric (SI) units5.0292 m4 more rows
How many feet is a survey pole?
A rod (sometimes known as a pole) is a measurement of 16.5 feet. Each rod is comprised of 25 links. A two-pole chain is twice the length of a rod, or 16.5 feet. Likewise, a four-pole chain, which is also known as a surveyor's chain, measures 66 feet (or 100 links).
How long is a pole?
Distance (length, height or width)MeasureEquivalent5½ yards1 perch, pole or rod40 poles1 furlong8 furlongs1 mile3 miles1 league3 more rows
What are the symbols used by surveyors?
Common Surveyor Symbols. Due to the nature of their work, a surveyor uses numerous physical markings while surveying a property. These markings include flags, tape, and stakes, which may be color-coded or marked with acronyms. This is a short list of some of these markings provided by the Fractracker Alliance.
What is a surveyor's flag?
Surveyor flags (sometimes referred to as streamers) and tape are attached to trees, fences, or a stake placed by the survey. Sometimes these flags and tape will have colors and symbols that explain what the surveyor found in that spot. Other times, these markings may lack symbolism, which could mean it could be part of a path or a proposed work site.
What is a control point?
Control Points. Similar to surveyor flags, a control point is a place on the property that the surveyor does not want to be disturbed. Frequently the area will be surrounded by a perimeter line using stakes and tape. In some cases, the metal pins will be used in place of wood stakes.
What is land survey?
A land survey is a detailed record of your property. A surveyor will take document the features, lay of the land, dimensions of the property, and the natural boundaries. All of this information is drawn into a two-dimensional map. However, to create this map, the surveyor will mark the property with stakes, flags, ...
What is the name of the person who holds the rod with the EDM prism?
Rodman – the person tasked with holding the rod with the EDM prism. Formerly called a chainman. Shoot – to take a distance measurement with an EDM. Zero – a perfect zero, whether it is in terms of degrees, minutes, or second.
Do surveyors use slang?
By nature, most professions use a combination of official terms and slang, and surveyors are no different. Over time, surveyors have developed an extensive vocabulary that most people would find strange and confusing, but most surveyors would understand quickly.
What is a plat in a land survey?
A survey plat is a drawing prepared by a licensed land surveyor showing the actual location of a parcel of property. A survey plat will usually contain information about the surveyor, a brief title of the document, data regarding its preparation, a legend identifying symbols on ...
What is the direction of a survey plat?
As you continue to turn you would face West, located 90 degrees West of North. Survey plats can also be read in reverse.
How to read a plat?
To read a plat, first locate the North arrow. This will orient you to the property’s actual location on the ground. Next, find the survey legend. You will see symbols indicating where pins from prior surveys were found (existing pin), where pins were placed by the surveyor who prepared the survey (pin placed), monuments, easements, structures and other information on the survey plat.
