Is MO99 the same as R-22?
Freon™ MO99 is the closest match to R-22 of all "no oil change" replacement refrigerants. It is compatible with all traditional and new lubricants.
Is MO99 a drop in?
Freon™ M099 is the closest match to R-22 operating pressures and mass flow rates when compared to other “no-oil change” replacements. The use of MO99 will minimize system component changes....MO99, MO-99, R438A, Drop-In R22 Replacement M099 Refrigerant.NameChemours D12860273 - Freon™ MO99 refrigerant (R438A) 25lb CylinderCountry of OriginUSABrandIsceon™RefrigerantR-438a15 more rows
Can you mix MO99 and R-22?
No. Freon™ MO99 should not be used to top off R-22 systems. Mixing refrigerants is not recommended. R-22 should be recovered using appropriate equipment and managed according to U.S. EPA guidelines specified in Section 608 of the U.S. Clean Air Act.
Is MO99 better than 407C?
The main difference is that pure HFC fluids, like R-407C, require a complete change out of mineral oil to POE lubricant for R-22/MO systems; whereas; Freon™ MO99 was specifically formulated to be used without the need for an oil change out, which saves time and money.
How do I charge my AC with MO99?
4:039:118 Simple Steps to Retrofit to Freon™ MO99 - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe initial charge should be about 85 to 90 percent of the standard r22 charge do not charge liquidMoreThe initial charge should be about 85 to 90 percent of the standard r22 charge do not charge liquid refrigerant directly into the compressor as this could cause serious damage. Start up the system.
What does Mo 99 Replace?
Freon™ MO99 is a non-ozone depleting HFC refrigerant designed to replace R-22 in existing DX residential and commercial AC and medium- and low-temperature refrigeration systems. Freon™ MO99 is compatible with traditional and new lubricants; in most cases, no change of lubricant type during retrofit is required.
How do you add MO99?
2:556:33How to properly convert from r22 to mo99 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd what once you've got your charge weighed in - you're going to be very close and so it won't takeMoreAnd what once you've got your charge weighed in - you're going to be very close and so it won't take very long to get the proper sub cooling in this particular. Case. So now we are adding.
Is Mo 99 a good replacement for R-22?
MO99 is simply the best refrigerant if you are considering replacing the refrigerant in your old home air conditioning system. It is ideal because it cools as well as R22 while costing significantly less. Freon™ MO99 refrigerant has proven to be a reliable and cost-effective, non-ozone depleting retrofit refrigerant.
What is MO99 refrigerant used for?
Freon™ MO99™ works with: Residential and commercial air conditioning systems (rooftop and indoor packages units, direct expansion chillers, split systems) Low- and medium-temperature refrigeration systems (self-contained and rack systems, condensing units)
Is MO99 a blend?
R438A (Freon™/Isceon MO99) is a HFC blend, used as a replacement for R22 in domestic, industrial and commercial air conditioning systems. It is also a retrofit replacement for R22 in low and medium temperature refrigeration systems and DX chiller systems.
How do you convert R22 to MO99?
How to Convert R22 to MO99 Refrigerant Retrofit GuideEstablish baseline performance with existing refrigerant. ( ... Remove all the old (R22 or other) refrigerant from the system into a recovery cylinder. ... Replace the filter drier and critical elastomeric seals/gaskets.Evacuate system and check for leaks.More items...
What happens if you mix R22 and 407c?
If you mix R407C with R22 inside your system the molecule of the HFC (R407C) gas will not link with the oil and in just few months of operation you will have a "sludge" like lubricant formation inside the circuit.
A Field-Proven Refrigerant That Replaces R-22 Without Requiring an Oil Change
Since fluorochemical refrigerants were introduced to the market more than 85 years ago, the Freon™ brand has been developing and evolving the chemistry behind them. Among those products is Freon™ MO99™ (R-438A), a retrofit refrigerant for R-22 that does not require an oil change.
Features and Benefits
Of all the "no oil change" replacement refrigerants, Freon™ MO99™ offers the closest performance match to R-22. Freon™ MO99™ has compatibility with all traditional and new lubricants, including mineral oil (MO), polyolester (POE) oil, and alkylbenzene (AB) oil.
Is Freon MO99 a good refrigerant?
Freon™ MO99 refrigerant has proven to be a reliable and cost-effective, non-ozone depleting retrofit refrigerant. In many cases, systems converted to this refrigerant are operating with the same mineral oil or lubricant that was used with the previous refrigerant.
Is Freon MO99 compatible with lubricant?
Freon™ MO99 is compatible with traditional and new lubricants; in most cases, no change of lubricant type during retrofit is required. Oil return is determined by a number of operating and design conditions; in some complex systems, ester lubricant (POE) may need to be added.
What is MO99 retrofit?
Retrofitting systems with MO99 provides the equipment owner with a cost effective alternative to recharging with the significantly more expensive R-22. In addition, because MO99 is compatible with mineral and polyester oils, it reduces costs by eliminating the need to change the existing oil to accommodate a different refrigerant.
Is MO99 better than R-22?
However, the advantages of MO99 span more than just environmental goals. Below are 10 reasons Dupont MO99 is the best R-22 replacement option. Refrigerant Depot is a wholesaler of the DuPont MO99 product and we offer some of the most competitive prices in the industry. 1. MO99 refrigerant is better for the environment.
Is MO99 flammable?
MO99 has a reduced discharge temperature in comparison to R-22, which may extend the life of the compressor. 6. The MO99 refrigerant is less flammable. With less than 3% hydrocarbons, the flammability risk is minimized under normal circumstances.
Is MO99 good for the environment?
1. MO99 refrigerant is better for the environment. Due to ozone depletion, R-22 refrigerant is being phased out of production to allow for the availability of more sustainable coolant products. DuPont MO99 is a non-toxic hydrofluorocarbon blend with a zero ozone depletion potential (ODP). 2.
Is MO99 oil compatible with other oils?
7. MO99 is compatible with other oils so no oil change is necessary. This refrigerant is compatible with both customary and artificial lubricants (mineral oil, alkyl-benzene (AB), and polyolester (POE) are all acceptable), eliminating the need for the oil to be changed. This saves time, labor, and cost. 8.
