Jolly trim is a linear trim or edge for tile. It can be ceramic or metal. It is used to finish a raw tile edge just like a bullnose tile.
What is Joley trim used for?
Schluter-JOLLY Trim is a finishing and edge-protection profile for the outside corners of tiled surfaces on walls. Other applications include transitions for dado coverings such as carpet, natural stone, or cold-cured resin coatings.
What are Schluter Jolly trim profiles?
Schluter JOLLY Trim Profiles are an anodized aluminum finishing and edge-protection profile for the outside corners of tiled surfaces. Shipping: $29.95 Flat rate ground shipping for unlimited Schluter products in this order. Some exclusions apply. (More Info)
What is-Jolly?
Schluter ® -JOLLY is a finishing and edge-protection profile for the outside corners of tiled surfaces on walls. The vertical wall section of the profile provides a decorative finish and protects adjacent tiles.
What is the difference between jolly and Schiene?
JOLLY and SCHIENE feature the same design. SCHIENE is designed to provide edging for tile coverings on floors. Typical applications include edge protection where tile is bordered by carpet, at expansion joints, or as a decorative edging for stairs. JOLLY is a finishing and edge-protection profile for outside corners of tiled surfaces on walls.
How do you use Schluter jolly?
9:3711:29How to Tile a Niche with Schluter® Profiles - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress the jolly in to the thinset mortar. And a line such that the profile will be flush with theMorePress the jolly in to the thinset mortar. And a line such that the profile will be flush with the surfaces of the tile inside the niche.
What is Schluter trim used for?
0:038:10How to install tile edge trim on walls: Schluter®-QUADEC profile - YouTubeYouTubeStart of suggested clipEnd of suggested clipSchlueter kwatak is a finishing and edge protection profile for outside corners of tiled surfaces.MoreSchlueter kwatak is a finishing and edge protection profile for outside corners of tiled surfaces.
What is pencil trim?
Pencil bullnose tile edging is one of the most popular tile trim choices, available in a range of sizes from finger-width to pencil-thin. It features a smooth, rounded look that can stand out from the tile or blend in seamlessly, depending on your preference.
What is the difference between bullnose and quarter round?
Bullnose trim can be used on stair lips, while quarter round is placed along the floor edge. Bullnose is a strip trim most often used in ceramic tile work to transition to a raised surface.
What is the difference between Schluter schiene and jolly?
SCHIENE is designed to provide edging for tile coverings on floors. Typical applications include edge protection where tile is bordered by carpet, at expansion joints, or as a decorative edging for stairs. JOLLY is a finishing and edge-protection profile for outside corners of tiled surfaces on walls.
Is Schluter trim waterproof?
Schluter®-KERDI is a pliable, sheet-applied, bonded waterproof membrane and vapor retarder with limited crack-bridging capabilities. KERDI features a modified polyethylene (PEVA) core with non-woven polypropylene on both sides to anchor the membrane in the thin-set mortar.
What is jolly trim tile used for?
Jolly trim is a linear trim or edge for tile. It can be ceramic or metal. It is used to finish a raw tile edge just like a bullnose tile. It can also be used as a liner to accent your design.
What is a bullnose trim?
What is Bullnose Tile? Simply put, bullnose tile is a trim that's used to provide a smooth, finished edge to your tile layout. This eliminates sharper angles and unfinished tile sides on your floor or wall. This makes bullnose tile a good safety solution—and also helps elevate the look of your renovation project!
Do you put tile trim on before tiling?
0:181:14How To: Wall Tiling. Step 12: Applying a tile trim - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe trim is simply pushed into the bed of adhesive at the edge. Before you tile the surface. AndMoreThe trim is simply pushed into the bed of adhesive at the edge. Before you tile the surface. And creates a nice neat finish.
What does SBN mean in tile?
SURFACE BULLNOSE (SBN) A tile piece that has a rounded, glazed edge that can be placed horizontally or vertically. It can also come as a corner piece (right or left) that features two perpendicular rounded glazed edges.
What is tile edging called?
Tile trim, alternately called trim tiles, are specialized pieces of tile designed with a smooth edge. They are used as finishing pieces to hide the rough, unfinished edges of standard tile (sometimes called field tile). Tile trim pieces can cost twice as much as standard tile pieces.
How do you finish tile edge without bullnose?
Use a Caulked Edge (No Transition) Some tile types don't offer a bullnose because a bullnose is not necessary. Glass tiles, tumbled stone varieties, and porcelain tiles have naturally finished edge. They do not need a separate edge piece to create a polished look. Simply install up to the edge and caulk.
A Quick Comparison Table
Though the main purpose of using Schluter Schiene and Schluter Jolly is almost the same, let’s find out some key differences –
Differences Between Schluter Schiene Vs. Jolly
Though the main purpose of using Schluter Schiene and Schluter Jolly is almost the same, let’s find out some key differences –
Tile trim pieces: Quarterround vs Bullnosed vs Jolly
So just when we THOUGHT we finished selecting all of the bath tile, we got the quote and it turns out the shower tile we picked only offers quarter round for trim, no surface bullnose.
Comments (3)
A bullnose edge (as you know) is a rounded over edge. A jolly edge is a straight vertical edge, there is no "profile" on the edge. Usually used as a liner or accent tile within the field.
