Receiving Helpdesk

what is hvac muffler

by Amie Kunde Published 4 years ago Updated 2 years ago

Part of a video titled HVAC 077 Refrigerant Muffler discharge / hot gas line
0:02
2:52
And by muffling this down all it does is allow for a place for the gas to expand. To so here the gasMoreAnd by muffling this down all it does is allow for a place for the gas to expand. To so here the gas comes out in a pulse. And allows that pulsation to smooth out before it comes out the other side.

Full Answer

What muffler to get?

To prevent muffler and exhaust pipe burns, here are some steps you can take:

  • Always wear long pants before you decide to go out riding (this should reduce your risk of getting burnt by as much as 46%)
  • Wrap or use heat shield products for your exhaust system
  • Be cautious whenever you get on or off your motorbike
  • Try to avoid all contact with the muffler, mainly while picking up your bike after it’s fallen

More items...

What is muffler exhaust system?

The muffler is located underneath the vehicle at the rear as a part of the exhaust system. It deadens and moderates exhaust sound. Mufflers have perforated tubes that form multiple chambers in which exhaust gases move through. When the gas expands, the tubes reduce the volume by pushing the gases in an alternate route to exit the muffler.

What is universal muffler?

Universal mufflers are created for use on a number of different vehicles so they'll need to be modified before they fit snugly onto your make and model.

What is a duct muffler?

ROUND DUCT NOISE MUFFLER SILENCER

  • 4" / 5" / 6" / 8" / 10" / 12" / 14" / 16" Sizes
  • Does not create Airflow Restriction
  • Maintenance Free
  • Building Code Compliant - Meets NFPA Standards 90A & 90B
  • UL Listed - Class I Air Duct
  • Easy to install in New or Existing Ductwork

What is the purpose of a refrigerant muffler?

The muffler is designed to be installed directly after the compressor. The product range is designed for use with HCFC and HFC refrigerants, along with their associated oils. The muffler reduces noise, due to gas pulsations, by allowing the gas to expand inside muffler chambers.

What is a AC compressor muffler?

0:022:15Look Inside: Car A/C Muffler - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere is the muffler this connector here goes onto the compressor. And then the compressor dischargesMoreHere is the muffler this connector here goes onto the compressor. And then the compressor discharges high pressure high temperature refrigerant vapor and sends it out this line towards the condenser.

How do you insulate an air conditioner noise?

Solutions to noisy air conditionersFencing: Try putting a fence in front of or around the air conditioner, this creates a barrier for the sound and traps the sound's movement. ... Use a Sound Blanket: Your manufacturer will have the information on what sound blanket fits your unit.Feb 7, 2019

How Does a Muffler Work?

There are different types of mufflers, and each manufacturer will use different design methods to achieve the sound and flow characteristics customers are after. That said, knowing more about the common designs will give you a better understanding of how most mufflers work.

When Did Mufflers Originate?

Engines have always been loud and people have had ears for as long as they have existed. It shouldn’t really come as a surprise to find out that Milton O. Reeves put the first patent on one way back in 1897.

Noise Control Considerations

A side-by-side of internal chambered and turbo designs. Don’t worry. No useable mufflers were hurt for this piece. Hank O’Hop

Learn More From This Helpful Video Tutorial

Want the short and skinny of it? No problem. Some are visual learners anyway, which is why we wanted to include a video that explains how mufflers work. The clip below talks about the same three types of mufflers discussed above.

What is a power exhaust fan?

A Power Exhaust is a motorized fan designed to remove varying volumes of air efficiently.

How does a power exhaust work?

When a Power Exhaust is designed to run at a single speed, it is considered to be a “Constant Volume Power Exhaust.” It is started or activated based on the position of the economizer’s outside air damper. A switch applied to a blade or the motor of the economizer is set to activate, or start the Power Exhaust. The Power Exhaust should activate when the economizer blade (s) open far enough to allow in more air than the barometric relief allows to escape. The positioning of the switch is field set.

What is an economizer on a rooftop?

When a rooftop unit includes an economizer, the system must also include an effective method for allowing excess air to escape the building, or undesirable over-pressurization can occur. This effective means is known as a Power Exhaust. Power Exhaust & Economizers are like peanut butter and jelly…. They belong together.

What happens if a hot air furnace line is clogged?

A clogged line can cause water damage to the hot air furnace and other areas of the room.

Can a rooftop fan have multiple speeds?

One speed does not fit all applications. There are times when pressure problems can still occur with a “Constant Volume Power Exhaust.” If the rooftop unit contains a multiple speed fan, occupants are running bathroom or kitchen fans, and depending upon the amount outside air the economizer is allowing into the building, negative or positive pressure conditions will occur.

Can you add a power exhaust to a building?

Power Exhaust & Economizers are like peanut butter and jelly… They belong together. Barometric relief dampers are an option, but typically aren’t capable of removing enough building Return Air (RA) to provide the desired building space pressure. Therefore, a Power Exhaust can be added to an economizer to adequately relieve building pressure.

What is the function of a muffler?

What is Muffler? The function of the muffler is to reduce the pressure of the exhaust gases sufficiently to permit them to be discharged to the atmosphere silently. The reduce the pressures the exhaust gases are permitted to expand slowly and to cool in the muffler.

Who invented the muffler?

Helmholtz is the name of a person who originated the idea of this type of muffler. The exhaust gases flow through this pipe. This resonator eliminates the fundamental and higher harmonics of the engine noise.

Why do mufflers have holes in the outside?

Most of the mufflers are provided with small drain holes in the outside shell to drain out the condensate from the exhaust gases and to resist corrosion.

What is the outer shell of a muffler made of?

In some designs, the outer shell of the muffler is made oval in shape to permit adequate clearance with the ground. Many of the outer shells of mufflers are made of steel coated with lead-tin alloy or aluminium to resist corrosion, particularly that caused by the exhaust condensate.

Why does exhaust make a loud noise?

If the high-pressure exhaust gases were allowed to enter the atmosphere directly from the exhaust manifold, a loud unpleasant noise would be heard like the firing of a gun. This noise is due to the large difference in pressure between the exhaust gases and the atmosphere. For quite an operation of the motor vehicle, it is desirable to reduce (or silencer) in the exhaust system. A muffler is connected between the engine exhaust pipe and the tail or outline pipe.

What is the sound absorber tube?

It consists of a perforated tube, around which a sound absorbing the material like fibreglass or steel wool is placed. The exhaust gases pass through the perforated tube. the sound-absorbing material reduces the high-pressure fluctuation of the exhaust gases thus reducing the noise intensity.

Why do mufflers have low efficiency?

The image shows two types of such mufflers which have low efficiency. Due to the restricted flow of the exhaust gases, back pressure increases causing the loss of engine horsepower.

What is the purpose of a muffler?

The purpose of a muffler is to reduce noise due togas pulsations by allowing the gas to expand in themuffler chambers, smoothing out the flow . Mufflershave internal baffles designed for minimum pressuredrop. These baffles change the velocity of the dis-charge gasses passing thru the muffler. This results in adampening effect on high frequency sound waves inthe gasses on high speed compressors. This also ironsout the pulsating waves in low speed compressors.Note: A muffler is not designed to eliminate vibrations.

Do mufflers remove noise?

Mufflers will only remove noise due to discharge gas pulsations. If the noise is due to vibra-tion of the compressor or lines, vibration eliminatorsshould be added to the discharge lines and possiblethe suction lines.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9