what is e2 code on pellet stove

by Mr. Coleman Kunde Sr. Published 3 years ago Updated 2 years ago

If the unit does not feed any fuel into the burn pot, there will be no fire and an E-2 code should appear. Should this be the case, inspect the auger system itself to ensure that the augers are working correctly; if they are, also ensure that the fuel is not getting hung up in the hopper.

Full Answer

What does error code 2 mean on pellet stove?

Error code-2 means that the system has failed to start. A clogged ignitor, faulty ignitor position, or bad fire sensor can be the reason behind this error code. However, a bad exhaust blower or damp pellets can be the reason why your pellet stove is not starting up as well.

How do I switch from pellet stove to E2?

I cleaned out the hopper of all pellets and vacuumed out all the dust. I then started the stove back up and it would go to 5 and 5 on the control panel for about 10 seconds and then switch to E2.

What does E0 mean on Englander pellet stove?

Error Code-0 : If the pellet stove panel shows code “E-0,” it means that there is no problem. Thus no action is required. 02. Error Code 1: Englander pellet stove error code E1 indicates the vacuum Loss of the pellet stove system.

What does error code 4 mean on Englander pellet stove?

05. Error Code 4 : Error code 4 in the Englander pellet stove indicates a sudden temperature drop of the whole unit. Your pellet stove temperature level can drastically drop when the system fails to burn the pellets. Now there can be two reasons behind this failure.

What is E2 code on Englander pellet stove?

Error codes are alpha-numeric codes that appear on the control board and indicate a fault within your pellet stove. Code "E-2" indicates a failure to light, code "E-3" is known as over-firing and indicates that the exhaust temperature has been exceeded and code "E-4" signifies a drop in exhaust temperature.

Where is the reset button on a pellet stove?

Many pellet stoves do not have a pellet stove reset button. Instead, you can reset them by letting the pellets run out. This way, you don't have to try to move pellets out of the stove when you are not sure if it is hot. Once the stove runs out of pellets, it will no longer be able to heat.Sep 5, 2020

What is E2 error on a Vogelzang pellet stove?

E2 is lack of vacuum. Pull the hose off the vacumm switch(inside the back of the stove) and try to blow through the hose.Feb 25, 2019

What is code for pellet stove exhaust?

You must have 16 inches of clearance between the stove's top to combustible materials and 3 inches of space from the stove's vent. There should be no combustibles, such as doors or drapes, within 36 inches of the front or sides of the stove.

How do you reset a pellet stove control board?

0:001:19USSC Pellet Stove Controller Reset Procedure - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you press and hold those for a few seconds until the word bahai comes up there. It is and releaseMoreIf you press and hold those for a few seconds until the word bahai comes up there. It is and release. And that kind of resets you you go into the u.s. stove company logo.

How do you know if auger motor is bad on a pellet stove?

1:473:39How to know if your auger motor is bad - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can feel the auger motor is really hot. And that's a sign that it needs to be replaced that it'sMoreYou can feel the auger motor is really hot. And that's a sign that it needs to be replaced that it's gone bad.

How do you fix e2 error on a pellet stove?

If the unit does not feed any fuel into the burn pot, there will be no fire and an E-2 code should appear. Should this be the case, inspect the auger system itself to ensure that the augers are working correctly; if they are, also ensure that the fuel is not getting hung up in the hopper.

How do you fix an e2 on a pellet stove?

1:5813:14VOGELZANG PELLET STOVE E2 ERROR "FIX" Plus Increase In ...YouTubeStart of suggested clipEnd of suggested clipAnd this is just clogging it up that's all. So you got to get a small line on your vacuum vacuumMoreAnd this is just clogging it up that's all. So you got to get a small line on your vacuum vacuum that all out. And the e2 should go away I didn't test it yet.

Is there a reset button on a Vogelzang pellet stove?

This temperature sensor has a red reset button in the center. It requires a manual reset to allow resuming power.

Do you need a chimney liner for a pellet stove?

If installing a pellet stove within a masonry fireplace, a stainless steel liner is typically required for use with a masonry chimney. An internal or external pellet stove flue must be used and installed in line with the manufacturer's guidelines and local building codes.Mar 16, 2021

How far away should a TV be from a pellet stove?

It's therefore recommended that you keep your TV at least 12 inches away from any appliance source of heat if possible because not doing so can damage it over time given enough exposure or may even cause it to explode.Sep 15, 2021

Can I mount a TV above a pellet stove?

Installing a TV directly above a wood stove isn't typically recommended, but if a TV will be sufficiently protected from the heat of a wood stove it may be suitable. TVs should be placed outside of clearance distances to combustibles, and a mantel can help protect a TV from the heat.Nov 9, 2020

7 Englander Pellet Stove Error Codes And Their Solution

From all error codes, only 5 point out different problems with your pellet stove. These situations are vacuum loss, star-up failure, over-heating, and temperature drop. The other one (Error code-0) indicates the sound condition of the Englander pellet stove. Let’s get deep into these error codes.

01. Error Code-0

If the pellet stove panel shows code “E-0,” it means that there is no problem. Thus no action is required.

02. Error Code 1

Englander pellet stove error code E1 indicates the vacuum Loss of the pellet stove system. It occurs when the exhaust flow fails to keep the “flue blockage” switch close. Faulty exhaust blower blocked flue pipe, cracked vacuum hose, and faulty wiring connection is also the reason behind Error code-1 in Englander pellet stove.

03. Error Code 2

04 Error Code 3

Overheating is a common problem of the pellet stove. It is signaled by Error code 3 in the Englander pellet stove. A dirty stove clogged exhaust fan and air-intake fan, or burning anything other than pellets can cause the system to overheat and eventually show Error code 3.

05. Error Code 4

Error code 4 in the Englander pellet stove indicates a sudden temperature drop of the whole unit. Your pellet stove temperature level can drastically drop when the system fails to burn the pellets. Now there can be two reasons behind this failure.

06. Error Code FS

Displaying the error code FS on your pellet stove control board means a failure to start the stove. Here it may happen that your stove could ignite the pellets but the control board didn’t get enough temperature signal. So, the board fails to identify that the stove was ignited and a fire was lit.

1. King Pellet Stove Error Code E1

You have a triggered high-limit temperature sensor if you get this error code. The high limit switch on a stove is a built-in safety feature that controls the opening and closing of the heating system. The switch will automatically cut off when the stove reaches an unsafe operating temperature.

2. King Pellet Stove E2 Error Code

This error code will appear on the screen if the stove runs out of fuel while you’re cooking. This is a simple mistake to correct. You are capable of completing the task on your own. So, let’s have a look at the possible causes of error code 2.

3. King Pellet Stove E3 Error Code

Error code 3 will appear on your display if the stove is unable to reach the Room Fan On temperature within the startup time. The following are some of the possible causes of error code 3:

4. King Pellet Stove Error Code E4

Error code 3 will appear on your display if the stove is unable to reach the Room Fan On temperature within the startup time. The following are some of the possible causes of error code 3:

5. King Pellet Stove E5 Error Code

When the auger output fuse in your stove blows, this error code appears. This can happen if the auger motor becomes stuck or fails.

6. King Pellet Stove E6 Error Code

This error code will appear on your stove display if the output fuse on the ignitor has blown. This error code on your pellet stove is caused by a shorted or malfunctioning ignitor.

7. King Pellet Stove E6 Error Code

When the output fuse for the Draft Fan (Exhaust Fan) blows, this error code appears. The Draft Fan motor in your stove has jammed or failed, which is why this error code appears.

Popular Posts:

1. manifestation numbers meaning

2. how long are different cheeses aged

3. is surgifoam the same as gelfoam

4. eating apple empty stomach benefits

5. can high efficiency furnace be vented through the roof

6. are you supposed to eat the seeds in concord grapes

7. what kind of outlet do you need for a tanning bed

8. 12x18 pixel size

9. what is gordons definition of anglo conformity

10. should i use pressure treated wood for outdoor furniture

Params
0	`post`
1	`postContent`
2	`author`
3	`updated_at`
4	`bing_rich_snippet_text`
5	`bing_rich_snippet_link`
6	`bing_related_keywords`
7	`google_related_keywords`
8	`bing_news_title`
9	`bing_news_description`
10	`bing_videos`
11	`bing_images`
12	`bing_search_result_title`
13	`bing_search_result_description`
14	`bing_search_result_url`
15	`bing_paa_questions`
16	`bing_paa_answers`
17	`bing_slider_faq_questions`
18	`bing_slider_faq_answers`
19	`bing_pop_faq_questions`
20	`bing_pop_faq_answers`
21	`bing_tab_faq_questions`
22	`bing_tab_faq_answers`
23	`google_faq_questions`
24	`google_faq_answers`
25	`google_rich_snippet`
26	`google_search_result`
27	`indexedArray`
28	`total_images`
29	`total_videos`
30	`settings`
31	`url_current`
32	`menus`
33	`sidebar`

Params

post

postContent

author

updated_at

bing_rich_snippet_text

bing_rich_snippet_link

bing_related_keywords

google_related_keywords

bing_news_title

bing_news_description

bing_videos

bing_images

bing_search_result_title

bing_search_result_description

bing_search_result_url

bing_paa_questions

bing_paa_answers

bing_slider_faq_questions

bing_slider_faq_answers

bing_pop_faq_questions

bing_pop_faq_answers

bing_tab_faq_questions

bing_tab_faq_answers

google_faq_questions

google_faq_answers

google_rich_snippet

google_search_result

indexedArray

total_images

total_videos

settings

url_current

menus

sidebar

Params
0	`__env`
1	`app`
2	`errors`
3	`post`
4	`postContent`
5	`author`
6	`updated_at`
7	`bing_rich_snippet_text`
8	`bing_rich_snippet_link`
9	`bing_related_keywords`
10	`google_related_keywords`
11	`bing_news_title`
12	`bing_news_description`
13	`bing_videos`
14	`bing_images`
15	`bing_search_result_title`
16	`bing_search_result_description`
17	`bing_search_result_url`
18	`bing_paa_questions`
19	`bing_paa_answers`
20	`bing_slider_faq_questions`
21	`bing_slider_faq_answers`
22	`bing_pop_faq_questions`
23	`bing_pop_faq_answers`
24	`bing_tab_faq_questions`
25	`bing_tab_faq_answers`
26	`google_faq_questions`
27	`google_faq_answers`
28	`google_rich_snippet`
29	`google_search_result`
30	`indexedArray`
31	`total_images`
32	`total_videos`
33	`settings`
34	`url_current`
35	`menus`
36	`sidebar`
37	`i`
38	`__currentLoopData`
39	`loop`
40	`item`

Params

__env

app

errors

post

postContent

author

updated_at

bing_rich_snippet_text

bing_rich_snippet_link

bing_related_keywords

google_related_keywords

bing_news_title

bing_news_description

bing_videos

bing_images

bing_search_result_title

bing_search_result_description

bing_search_result_url

bing_paa_questions

bing_paa_answers

bing_slider_faq_questions

bing_slider_faq_answers

bing_pop_faq_questions

bing_pop_faq_answers

bing_tab_faq_questions

bing_tab_faq_answers

google_faq_questions

google_faq_answers

google_rich_snippet

google_search_result

indexedArray

total_images

total_videos

settings

url_current

menus

sidebar

__currentLoopData

loop

item

Params
0	`__env`
1	`app`
2	`errors`
3	`post`
4	`postContent`
5	`author`
6	`updated_at`
7	`bing_rich_snippet_text`
8	`bing_rich_snippet_link`
9	`bing_related_keywords`
10	`google_related_keywords`
11	`bing_news_title`
12	`bing_news_description`
13	`bing_videos`
14	`bing_images`
15	`bing_search_result_title`
16	`bing_search_result_description`
17	`bing_search_result_url`
18	`bing_paa_questions`
19	`bing_paa_answers`
20	`bing_slider_faq_questions`
21	`bing_slider_faq_answers`
22	`bing_pop_faq_questions`
23	`bing_pop_faq_answers`
24	`bing_tab_faq_questions`
25	`bing_tab_faq_answers`
26	`google_faq_questions`
27	`google_faq_answers`
28	`google_rich_snippet`
29	`google_search_result`
30	`indexedArray`
31	`total_images`
32	`total_videos`
33	`settings`
34	`url_current`
35	`menus`
36	`sidebar`
37	`i`
38	`__currentLoopData`
39	`loop`
40	`item`

Params

__env

app

errors

post

postContent

author

updated_at

bing_rich_snippet_text

bing_rich_snippet_link

bing_related_keywords

google_related_keywords

bing_news_title

bing_news_description

bing_videos

bing_images

bing_search_result_title

bing_search_result_description

bing_search_result_url

bing_paa_questions

bing_paa_answers

bing_slider_faq_questions

bing_slider_faq_answers

bing_pop_faq_questions

bing_pop_faq_answers

bing_tab_faq_questions

bing_tab_faq_answers

google_faq_questions

google_faq_answers

google_rich_snippet

google_search_result

indexedArray

total_images

total_videos

settings

url_current

menus

sidebar

__currentLoopData

loop

item

Params
0	`__env`
1	`app`
2	`errors`
3	`post`
4	`postContent`
5	`author`
6	`updated_at`
7	`bing_rich_snippet_text`
8	`bing_rich_snippet_link`
9	`bing_related_keywords`
10	`google_related_keywords`
11	`bing_news_title`
12	`bing_news_description`
13	`bing_videos`
14	`bing_images`
15	`bing_search_result_title`
16	`bing_search_result_description`
17	`bing_search_result_url`
18	`bing_paa_questions`
19	`bing_paa_answers`
20	`bing_slider_faq_questions`
21	`bing_slider_faq_answers`
22	`bing_pop_faq_questions`
23	`bing_pop_faq_answers`
24	`bing_tab_faq_questions`
25	`bing_tab_faq_answers`
26	`google_faq_questions`
27	`google_faq_answers`
28	`google_rich_snippet`
29	`google_search_result`
30	`indexedArray`
31	`total_images`
32	`total_videos`
33	`settings`
34	`url_current`
35	`menus`
36	`sidebar`
37	`i`
38	`__currentLoopData`
39	`loop`
40	`item`

Params

__env

app

errors

post

postContent

author

updated_at

bing_rich_snippet_text

bing_rich_snippet_link

bing_related_keywords

google_related_keywords

bing_news_title

bing_news_description

bing_videos

bing_images

bing_search_result_title

bing_search_result_description

bing_search_result_url

bing_paa_questions

bing_paa_answers

bing_slider_faq_questions

bing_slider_faq_answers

bing_pop_faq_questions

bing_pop_faq_answers

bing_tab_faq_questions

bing_tab_faq_answers

google_faq_questions

google_faq_answers

google_rich_snippet

google_search_result

indexedArray

total_images

total_videos

settings

url_current

menus

sidebar

__currentLoopData

loop

item

Params
0	`__env`
1	`app`
2	`errors`
3	`post`
4	`postContent`
5	`author`
6	`updated_at`
7	`bing_rich_snippet_text`
8	`bing_rich_snippet_link`
9	`bing_related_keywords`
10	`google_related_keywords`
11	`bing_news_title`
12	`bing_news_description`
13	`bing_videos`
14	`bing_images`
15	`bing_search_result_title`
16	`bing_search_result_description`
17	`bing_search_result_url`
18	`bing_paa_questions`
19	`bing_paa_answers`
20	`bing_slider_faq_questions`
21	`bing_slider_faq_answers`
22	`bing_pop_faq_questions`
23	`bing_pop_faq_answers`
24	`bing_tab_faq_questions`
25	`bing_tab_faq_answers`
26	`google_faq_questions`
27	`google_faq_answers`
28	`google_rich_snippet`
29	`google_search_result`
30	`indexedArray`
31	`total_images`
32	`total_videos`
33	`settings`
34	`url_current`
35	`menus`
36	`sidebar`
37	`i`
38	`__currentLoopData`
39	`loop`
40	`item`

Params

__env

app

errors

post

postContent

author

updated_at

bing_rich_snippet_text

bing_rich_snippet_link

bing_related_keywords

google_related_keywords

bing_news_title

bing_news_description

bing_videos

bing_images

bing_search_result_title

bing_search_result_description

bing_search_result_url

bing_paa_questions

bing_paa_answers

bing_slider_faq_questions

bing_slider_faq_answers

bing_pop_faq_questions

bing_pop_faq_answers

bing_tab_faq_questions

bing_tab_faq_answers

google_faq_questions

google_faq_answers

google_rich_snippet

google_search_result

indexedArray

total_images

total_videos

settings

url_current

menus

sidebar

__currentLoopData

loop

item

Params
0	`__env`
1	`app`
2	`errors`
3	`post`
4	`postContent`
5	`author`
6	`updated_at`
7	`bing_rich_snippet_text`
8	`bing_rich_snippet_link`
9	`bing_related_keywords`
10	`google_related_keywords`
11	`bing_news_title`
12	`bing_news_description`
13	`bing_videos`
14	`bing_images`
15	`bing_search_result_title`
16	`bing_search_result_description`
17	`bing_search_result_url`
18	`bing_paa_questions`
19	`bing_paa_answers`
20	`bing_slider_faq_questions`
21	`bing_slider_faq_answers`
22	`bing_pop_faq_questions`
23	`bing_pop_faq_answers`
24	`bing_tab_faq_questions`
25	`bing_tab_faq_answers`
26	`google_faq_questions`
27	`google_faq_answers`
28	`google_rich_snippet`
29	`google_search_result`
30	`indexedArray`
31	`total_images`
32	`total_videos`
33	`settings`
34	`url_current`
35	`menus`
36	`sidebar`
37	`i`
38	`__currentLoopData`
39	`loop`
40	`item`

Params

__env

app

errors

post

postContent

author

updated_at

bing_rich_snippet_text

bing_rich_snippet_link

bing_related_keywords

google_related_keywords

bing_news_title

bing_news_description

bing_videos

bing_images

bing_search_result_title

bing_search_result_description

bing_search_result_url

bing_paa_questions

bing_paa_answers

bing_slider_faq_questions

bing_slider_faq_answers

bing_pop_faq_questions

bing_pop_faq_answers

bing_tab_faq_questions

bing_tab_faq_answers

google_faq_questions

google_faq_answers

google_rich_snippet

google_search_result

indexedArray

total_images

total_videos

settings

url_current

menus

sidebar

__currentLoopData

loop

item

Params
0	`__env`
1	`app`
2	`errors`
3	`post`
4	`postContent`
5	`author`
6	`updated_at`
7	`bing_rich_snippet_text`
8	`bing_rich_snippet_link`
9	`bing_related_keywords`
10	`google_related_keywords`
11	`bing_news_title`
12	`bing_news_description`
13	`bing_videos`
14	`bing_images`
15	`bing_search_result_title`
16	`bing_search_result_description`
17	`bing_search_result_url`
18	`bing_paa_questions`
19	`bing_paa_answers`
20	`bing_slider_faq_questions`
21	`bing_slider_faq_answers`
22	`bing_pop_faq_questions`
23	`bing_pop_faq_answers`
24	`bing_tab_faq_questions`
25	`bing_tab_faq_answers`
26	`google_faq_questions`
27	`google_faq_answers`
28	`google_rich_snippet`
29	`google_search_result`
30	`indexedArray`
31	`total_images`
32	`total_videos`
33	`settings`
34	`url_current`
35	`menus`
36	`sidebar`
37	`i`
38	`__currentLoopData`
39	`loop`
40	`item`

Params

__env

app

errors

post

postContent

author

updated_at

bing_rich_snippet_text

bing_rich_snippet_link

bing_related_keywords

google_related_keywords

bing_news_title

bing_news_description

bing_videos

bing_images

bing_search_result_title

bing_search_result_description

bing_search_result_url

bing_paa_questions

bing_paa_answers

bing_slider_faq_questions

bing_slider_faq_answers

bing_pop_faq_questions

bing_pop_faq_answers

bing_tab_faq_questions

bing_tab_faq_answers

google_faq_questions

google_faq_answers

google_rich_snippet

google_search_result

indexedArray

total_images

total_videos

settings

url_current

menus

sidebar

__currentLoopData

loop

item

Metadata
Bindings	0. 2025-06-12 04:26:30 1. what-is-e2-code-on-pellet-stove
Backtrace	15. /app/Providers/RouteServiceProvider.php:54 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842 19. Route binding:39 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78

Metadata

Bindings

0. 2025-06-12 04:26:30
1. what-is-e2-code-on-pellet-stove

Backtrace

15. /app/Providers/RouteServiceProvider.php:54
18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
19. Route binding:39
20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78

Metadata
Bindings	0. 145600 1. 0
Backtrace	19. middleware::checkdate:30 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50

Metadata

Bindings

0. 145600
1. 0

Backtrace

19. middleware::checkdate:30
20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50

Metadata
Bindings	0. header
Backtrace	15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205

Metadata

Bindings

0. header

Backtrace

15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205

Metadata
Bindings	0. 1
Backtrace	19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261

Metadata

Bindings

0. 1

Backtrace

19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261

Metadata
Backtrace	24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261

Metadata

Backtrace

24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261

Metadata
Bindings	0. publish
Backtrace	14. /app/View/Composers/SidebarView.php:22 15. /app/View/Composers/SidebarView.php:12 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177

Metadata

Bindings

0. publish

Backtrace

14. /app/View/Composers/SidebarView.php:22
15. /app/View/Composers/SidebarView.php:12
16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177

Metadata
Bindings	0. 46900
Backtrace	21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61

Metadata

Bindings

0. 46900

Backtrace

21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61

0 of 0

array:25 [▼"cookie" => array:1 [▶ 0 => "_pk_id.64.7c30=0b071e3838509719.1749682576.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IjMyUTR1V0xIeW40Y2tyZ0kzdFNxOUE9PSIsInZhbHVlIjoidUdqTDRhRnZ4MGRlck1DTFphS3dDV2hVOXE2VERwazA4bStNdXB6R2Z5cTV6YkhZY3J1bGJUSUFZZUlMaGZlZFFlNnFnK2NqYW5uczBTN2VZQkU3aStJNTJ6TW5mWGdZT0h4L2FIQzBHdCsyRDQwRGRlK1ErcTc3akZnM0JSdVYiLCJtYWMiOiJmOWVhODMxYmY1YTQwMzU1ODYyMGUxNzhkMzY4Y2RkMThiZWJlOWRhNjAyZTUyYzNlYjk3ZDg0ODk5ZmMzZjE0IiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6IklLQlMvNGN2cmpYRDZvbmN1Y2ZKNlE9PSIsInZhbHVlIjoiRDdaQnVxdnJLZjFjbVFtQUlHLzd6cVlXOXQ3bTZNaHdJZDVUS2FERndIUWwzWE1PM01VQzRKci9FaVZyOFpsd0NNZ3lPdFpOT0xRZTRLd0MydWNuWGMrT0ROTEFyMHFKVTUybGxPRkNnSDVaTkJUQnVrSFNEZktNaW9DNXBzVEMiLCJtYWMiOiJhMTVhZmZiNTEwMmY0MTEwMjg4M2QxNmE1N2U5ZWU0MTQwZGM2NGQ0MWZlYjc3Y2RkZjYyYWQyMWJiMzkyY2ViIiwidGFnIjoiIn0%3D ◀_pk_id.64.7c30=0b071e3838509719.1749682576.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IjMyUTR1V0xIeW40Y2tyZ0kzdFNxOUE9PSIsInZhbHVlIjoidUdqTDRhRnZ4MGRlck1DTFphS3dDV ▶" ] "cf-ipcountry" => array:1 [▶ 0 => "US" ] "cf-connecting-ip" => array:1 [▶ 0 => "216.73.216.176" ] "cdn-loop" => array:1 [▶ 0 => "cloudflare; loops=1" ] "sec-fetch-mode" => array:1 [▶ 0 => "navigate" ] "sec-fetch-site" => array:1 [▶ 0 => "none" ] "accept" => array:1 [▶ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [▶ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [▶ 0 => "1" ] "sec-ch-ua-platform" => array:1 [▶ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [▶ 0 => "?0" ] "sec-ch-ua" => array:1 [▶ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [▶ 0 => "no-cache" ] "pragma" => array:1 [▶ 0 => "no-cache" ] "accept-encoding" => array:1 [▶ 0 => "gzip, br" ] "cf-ray" => array:1 [▶ 0 => "94e4b3be582070c4-ORD" ] "priority" => array:1 [▶ 0 => "u=0, i" ] "sec-fetch-dest" => array:1 [▶ 0 => "document" ] "sec-fetch-user" => array:1 [▶ 0 => "?1" ] "cf-visitor" => array:1 [▶ 0 => "{"scheme":"https"}" ] "connection" => array:1 [▶ 0 => "close" ] "x-forwarded-proto" => array:1 [▶ 0 => "https" ] "x-forwarded-for" => array:1 [▶ 0 => "216.73.216.176, 172.69.58.149" ] "x-server-addr" => array:1 [▶ 0 => "154.12.239.204" ] "host" => array:1 [▶ 0 => "receivinghelpdesk.com" ]]

0 of 0

array:56 [▼"USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/what-is-e2-code-on-pellet-stove" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/what-is-e2-code-on-pellet-stove" "REMOTE_PORT" => "32788" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.69.58.149" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_COOKIE" => "_pk_id.64.7c30=0b071e3838509719.1749682576.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IjMyUTR1V0xIeW40Y2tyZ0kzdFNxOUE9PSIsInZhbHVlIjoidUdqTDRhRnZ4MGRlck1DTFphS3dDV2hVOXE2VERwazA4bStNdXB6R2Z5cTV6YkhZY3J1bGJUSUFZZUlMaGZlZFFlNnFnK2NqYW5uczBTN2VZQkU3aStJNTJ6TW5mWGdZT0h4L2FIQzBHdCsyRDQwRGRlK1ErcTc3akZnM0JSdVYiLCJtYWMiOiJmOWVhODMxYmY1YTQwMzU1ODYyMGUxNzhkMzY4Y2RkMThiZWJlOWRhNjAyZTUyYzNlYjk3ZDg0ODk5ZmMzZjE0IiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6IklLQlMvNGN2cmpYRDZvbmN1Y2ZKNlE9PSIsInZhbHVlIjoiRDdaQnVxdnJLZjFjbVFtQUlHLzd6cVlXOXQ3bTZNaHdJZDVUS2FERndIUWwzWE1PM01VQzRKci9FaVZyOFpsd0NNZ3lPdFpOT0xRZTRLd0MydWNuWGMrT0ROTEFyMHFKVTUybGxPRkNnSDVaTkJUQnVrSFNEZktNaW9DNXBzVEMiLCJtYWMiOiJhMTVhZmZiNTEwMmY0MTEwMjg4M2QxNmE1N2U5ZWU0MTQwZGM2NGQ0MWZlYjc3Y2RkZjYyYWQyMWJiMzkyY2ViIiwidGFnIjoiIn0%3D ◀_pk_id.64.7c30=0b071e3838509719.1749682576.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IjMyUTR1V0xIeW40Y2tyZ0kzdFNxOUE9PSIsInZhbHVlIjoidUdqTDRhRnZ4MGRlck1DTFphS3dDV ▶" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.176" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_CF_RAY" => "94e4b3be582070c4-ORD" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.176, 172.69.58.149" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1749682590.4757 "REQUEST_TIME" => 1749682590]

0 of 0

array:4 [▼"_pk_id_64_7c30" => null "_pk_ses_64_7c30" => null "XSRF-TOKEN" => "IKpdCoz51s3mdqlu1zXmtYVonrFeMZrG1hTGbrBs" "askhelpdesk_session" => "vkTewVC4Jz0YCjAbWqH8HUkOb9xvbDf7siBlUpJN"]

0 of 0

array:7 [▼"content-type" => array:1 [▶ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [▶ 0 => "private, must-revalidate" ] "date" => array:1 [▶ 0 => "Wed, 11 Jun 2025 22:56:30 GMT" ] "pragma" => array:1 [▶ 0 => "no-cache" ] "expires" => array:1 [▶ 0 => -1 ] "set-cookie" => array:2 [▶ 0 => "XSRF-TOKEN=eyJpdiI6IjVZbkk5TVVPc3pJQk5nTnVPTytTY2c9PSIsInZhbHVlIjoid2poS2pBSlJiWStFMXJ5ZG1VQ1VTcWVSYkswSXRqZ0ludTNzaTcvSmg0aTNsL25KQ0l0VnRlWHU1Uzl5RDE3c2ZmMWVRVGRCa1owaWZpd2JPNU03RU1CSVo4S3FIQUJ4OUtPTkpuL3piWkdRY2huMlk5ZlZLdnRsaXF6cmRkT3oiLCJtYWMiOiJiYTNkNmU4YWRkNzUxZGQzNmM4Y2QxYTJjNjU1NzA3NmRjMmY5MTNkMmY3MDIxODQ5YzQwZTZkNGQ1MjcwN2ViIiwidGFnIjoiIn0%3D; expires=Thu, 12-Jun-2025 00:56:31 GMT; Max-Age=7200; path=/; samesite=lax ◀XSRF-TOKEN=eyJpdiI6IjVZbkk5TVVPc3pJQk5nTnVPTytTY2c9PSIsInZhbHVlIjoid2poS2pBSlJiWStFMXJ5ZG1VQ1VTcWVSYkswSXRqZ0ludTNzaTcvSmg0aTNsL25KQ0l0VnRlWHU1Uzl5RDE3c2ZmMWVRV ▶" 1 => "askhelpdesk_session=eyJpdiI6Ikc0Q1VWZlg2KzJiV1MwTjVlY2o4Umc9PSIsInZhbHVlIjoiQVN3aU0veGd6RFRma1JGZHdpcnJNUzJrdXJiTWRlcXFENzVDK2VRRWxpTDJ6VS9UVWNqNS9Kd1I3Z0JnOHlnT1N4dXVlQWJBbFhKSEJRcHFaQVJhSnB5VXhQUXhwb1NtdEtPZ2EzR2R4S014UzFROFJ4UjN1UmdkRXJiWCt0b1EiLCJtYWMiOiJlMzdiZmE0MTNjY2ExNDYyZWJkNmQ4MmI3ODkwYzUwMTM4ZTgwNmZiYTA0Mjk1MzIxOThjNTZlMmRlMzc5YTdjIiwidGFnIjoiIn0%3D; expires=Thu, 12-Jun-2025 00:56:31 GMT; Max-Age=7200; path=/; httponly; samesite=lax ◀askhelpdesk_session=eyJpdiI6Ikc0Q1VWZlg2KzJiV1MwTjVlY2o4Umc9PSIsInZhbHVlIjoiQVN3aU0veGd6RFRma1JGZHdpcnJNUzJrdXJiTWRlcXFENzVDK2VRRWxpTDJ6VS9UVWNqNS9Kd1I3Z0JnOHln ▶" ] "Set-Cookie" => array:2 [▶ 0 => "XSRF-TOKEN=eyJpdiI6IjVZbkk5TVVPc3pJQk5nTnVPTytTY2c9PSIsInZhbHVlIjoid2poS2pBSlJiWStFMXJ5ZG1VQ1VTcWVSYkswSXRqZ0ludTNzaTcvSmg0aTNsL25KQ0l0VnRlWHU1Uzl5RDE3c2ZmMWVRVGRCa1owaWZpd2JPNU03RU1CSVo4S3FIQUJ4OUtPTkpuL3piWkdRY2huMlk5ZlZLdnRsaXF6cmRkT3oiLCJtYWMiOiJiYTNkNmU4YWRkNzUxZGQzNmM4Y2QxYTJjNjU1NzA3NmRjMmY5MTNkMmY3MDIxODQ5YzQwZTZkNGQ1MjcwN2ViIiwidGFnIjoiIn0%3D; expires=Thu, 12-Jun-2025 00:56:31 GMT; path=/ ◀XSRF-TOKEN=eyJpdiI6IjVZbkk5TVVPc3pJQk5nTnVPTytTY2c9PSIsInZhbHVlIjoid2poS2pBSlJiWStFMXJ5ZG1VQ1VTcWVSYkswSXRqZ0ludTNzaTcvSmg0aTNsL25KQ0l0VnRlWHU1Uzl5RDE3c2ZmMWVRV ▶" 1 => "askhelpdesk_session=eyJpdiI6Ikc0Q1VWZlg2KzJiV1MwTjVlY2o4Umc9PSIsInZhbHVlIjoiQVN3aU0veGd6RFRma1JGZHdpcnJNUzJrdXJiTWRlcXFENzVDK2VRRWxpTDJ6VS9UVWNqNS9Kd1I3Z0JnOHlnT1N4dXVlQWJBbFhKSEJRcHFaQVJhSnB5VXhQUXhwb1NtdEtPZ2EzR2R4S014UzFROFJ4UjN1UmdkRXJiWCt0b1EiLCJtYWMiOiJlMzdiZmE0MTNjY2ExNDYyZWJkNmQ4MmI3ODkwYzUwMTM4ZTgwNmZiYTA0Mjk1MzIxOThjNTZlMmRlMzc5YTdjIiwidGFnIjoiIn0%3D; expires=Thu, 12-Jun-2025 00:56:31 GMT; path=/; httponly ◀askhelpdesk_session=eyJpdiI6Ikc0Q1VWZlg2KzJiV1MwTjVlY2o4Umc9PSIsInZhbHVlIjoiQVN3aU0veGd6RFRma1JGZHdpcnJNUzJrdXJiTWRlcXFENzVDK2VRRWxpTDJ6VS9UVWNqNS9Kd1I3Z0JnOHln ▶" ]]

0 of 0

array:4 [▼"_token" => "IKpdCoz51s3mdqlu1zXmtYVonrFeMZrG1hTGbrBs" "_previous" => array:1 [▶ "url" => "https://receivinghelpdesk.com/ask/what-is-e2-code-on-pellet-stove" ] "_flash" => array:2 [▶ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => []]

1 x Application (99.09%)	1.25s
1 x Booting (0.88%)	11.09ms