Cedar Wash is designed to remove surface resin oils and high concentrations of water-soluble wood extractives in addition to dirt, grease, grime, pollen, and surface stains without harming the wood. We highly recommended Cedar Wash as a cleaner for Southern Pine, Douglas Fir, Spruce
Spruce
A spruce is a tree of the genus Picea, a genus of about 35 species of coniferous evergreen trees in the family Pinaceae, found in the northern temperate and boreal regions of the Earth. Spruces are large trees, from about 20–60 m tall when mature, and have whorled branches and co…
Full Answer
Does Cedar Wash contain bleach?
Once those products soak into the cedar and the sun beats down the almost "bake" in the sun, it causes extreme drying, making the shingles or shakes dry, thin and brittle. With Cedar Wash, cedar siding and roofing shingles come out uniformly clean. Our Cedar cleaning product does not contain bleach nor does it require bleach to be added.
Can you use Cedar Wash on wood?
Unlike chlorine bleach and TSP the Cedar Wash will not harm the vegetation around the house, it also will not stain any painted surface or any fabric that it may come in contact with. Cedar Wash works great on all types of cedar or any type of natural wood.
Does redihan Cedar Wash really work?
- Redihan's Cedar Wash ― Thoroughly cleans, brightens and restores cedar back to its original beauty without the use of harsh chemicals or bleach (which can strip the wood and make it dry and crack like a brittle nail). Make cedar like new again.
How much does it cost to power wash cedar wood?
So, the less times you need to power wash, the better. Knowing this, even the blackest, grayest, most aged Cedar comes clean, like new, with the lightest pressure washing we've ever done. Most wood cleaners cost an average of $12.00 per gallon.
How do you use cedar wash?
Apply the Cedar Wash solution starting at the bottom of the wall and work your way up. Work only an area big enough so that the Cedar Wash is on the wall for about 10 to 15 minutes. Gently scrub the wall with a soft bristled brush to remove stubborn stains and heavily soiled areas.
What do you wash cedar with?
The Cedar Bureau recommends using a solution no stronger than one-part bleach to three parts water. Apply it with a pump sprayer and let it sit for about 15 minutes before rinsing it off with a garden hose. Be sure to keep the hose pointed downward to avoid forcing water up behind the shingles.
How do you pressure wash cedar?
Power washing can be used to clean cedar as long as the sprayer is set at a low pressure to prevent damaging the wood's soft surface. Once cleaned and allowed to dry, the wood can then be painted using a urethane-acrylic house paint.
What is the best cleaner for cedar wood?
Pour one gallon of water into a bucket, mixed with 2 ounces of oxalic acid. This type of acid can be found at any hardware or home improvement store and works well on cedar.Dip a cleaning brush into the solution, then scrub the solution into the wood.Rinse outdoor areas with a hose.
Can cedar be left untreated?
Left untreated, cedar shakes — individual planks of one of several varieties of cedar — will discolor and begin to soften, with a possibility of rot after about five years, depending on the climate. There are several options for covering cedar siding, including stain, a clear treatment or paint.
Can you use OxiClean to clean cedar siding?
OxiClean uses the power of oxygen and bleach derivatives to break down the barrier shells of algae, mold, and mildew from cedar siding. Brilliantly, this product is perfect for uncovering wood's natural beauty, which makes it a prime candidate for cleaning up grimy cedar siding.
Should you power wash cedar?
Yes, you can pressure wash cedar siding by using a low PSI pressure washer or adjusting a pressure washer to its lowest PSI setting. This protects the cedar from being damaged from too high of pressure because it is softwood.
Why does cedar turn black?
The most common culprits are tannins, mildew, and mold. Tannins ordinarily leach from cedar wood, and do not normally cause any problems. However, when tannins mix with metal and iron, a chemical reaction occurs and a black stain can form. Cedar, along with any other wood, is a natural habitat for mildew and mold.
Can you use bleach on cedar wood?
Chlorine bleach is the traditional and most popular form used in households, most often in the washer to get stains out of laundry. The powerful ingredient is sodium hypochlorite, which is a toxic substance and is not good for your cedar siding, as it can damage the wood fibers.
How do I clean and restore cedar?
The best way to restore your cedar siding or cedar fence to its original glory is with soft washing. Instead of the robust streams of high-pressure water used in pressure washing, soft washing uses a low-pressure technique with a special mixture of highly effective and biodegradable cleaning solutions.
Does wet and forget work on cedar?
Clean Algae Off Cedar Siding Without Any Scrubbing! Wet And Forget is as simple as spraying your outdoor surface and leaving it. Green algae, black mold, and moss begin to die off on contact. The combination of the wind and the rain rinses and scrubs your surfaces clean over time.
Can you clean cedar with hydrogen peroxide?
Wash Safe in the News & Reviews: John Redihan, the company's owner, said that Wash Safe, which uses foam produced by hydrogen peroxide to lift the mold and mildew out of the wood, is nontoxic, will not harm plants or lawns and biodegrades in about six hours.
How do you clean rough cedar?
You can use water mixed with a bit of mild detergent for a basic cleaner. If you need a stronger cleaner, you can dilute bleach with water for a cleaner that will accentuate the natural luster of the cedar. This is particularly effective in the removal of mildew. Wipe the wood gently, and avoid excessive scrubbing.
How do I clean and protect cedar?
0:231:50What Is the Best Way to Protect & Restore Cedar Furniture? - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut one of the simplest. Ways is to use tung oil it's a simple one-step application and it's aboutMoreBut one of the simplest. Ways is to use tung oil it's a simple one-step application and it's about as easy as you can get the key with tung oil is that you want to flood the surface.
How do you clean cedar before staining?
Prepare your cedar siding by washing it with soapy water to remove any dirt or dust (if any has accumulated). After you have washed it, wait for it to dry before applying any stain to the cedar.
How do you maintain cedar wood?
If your cedar is still in good condition and isn't well-weathered, a clean and reapplication will do the trick. To recoat Western Red Cedar, give it a gentle scrub with warm, soapy water to remove dirt and mildew. After the cedar is fully clean and dry, reapply your chosen finish as before.
Surface Prep Cleaner for Cedar
Cedar Wash is a Ready-to-Use cleaner specifically formulated for preparing the bare wood surface of wood species that contain high levels of wood extractives and resin oils.
Project Spotlight
Do you have an old stain that doesn't really show the warmth and beauty your home deserves? Ready to restore it to its natural look? It's easy to start by stripping old finishes using StripIt or S-100. Check Out This Video...
How many square feet does 5 gallons of cedar wash clean?
Five gallons of Cedar Wash Ready-to-Use cleaning solution will clean approximately 1000 square feet of wood surface area. Each gallon of Cedar Wash, as applied, will clean approximately 175 to 225 square feet of wood surface depending on the wood porosity.
What is the most important step in finishing wood?
The most important step in finishing wood - whether it is a log wall, a piece of log siding, or even a piece of wood furniture - is the surface preparation prior to applying a finish system to the wood surface. This important message has been communicated by Perma-Chink Systems for many years. The reason this topic is so important is that this step, or process, has an impact on the longevity and durability of the system. More specifically, an unclean wood surface and the presence of foreign substances interfere with the direct surface contact of the coating with the wood substrate; furthermore, it will impact the adhesion properties of the finish in a negative manner as well as present a good possibility that wood discoloration will be a topic to deal with in the future.
Can you use cedar wash in a pressure washer?
Cedar Wash is most easily applied using a pump-up garden type sprayer although a mop and bucket works, too. If you are going to use a pressure washer ( not recommended), adding Cedar Wash directly to the pressure washer does not give the cleaner enough contact time with the wood to be very effective.
Can you freeze cedar wash?
Store Cedar Wash out of direct sunlight and protect from freezing. Although Cedar Wash is freeze-thaw stable, if the product is accidentally frozen, allow to thaw and check for suitability of use before applying.
The reason why you should not use a pressure washer
I know pressure washers come extremely handy when cleaning dirty items but trust me, you wouldn’t want to use a pressure washer on bare wood. Not only cedar wood but any wood.
Things that you will need
Scrubbing brush: If you are cleaning a cedar deck then you will want to pick a stiff-bristle brush that comes with the stick so that you won’t have to bend down to scrub the deck. Pick hand brush otherwise.
Step by Step Process
Pour a little amount of liquid dishwashing soap into the bucket you have picked. The liquid amount should be double the amount you would have used to clean the sink that is filled with all the dishes.
Some Advanced Tips
Even after washing the wood with water if you see any dirt part on the wood, then scrub that area with soapy water again to get that cleaned.
What detergent should I use on cedar siding?
Using a black tip on your pressure washer, cover your cedar siding with the sudsy detergent.
What is pressure washing?
Pressure washing, otherwise known as "power washing," utilizes highly pressurized water spray to remove dirt, animal droppings, loose paint, and other debris from surfaces like siding, brick, automotive parts, and concrete surfaces. Water that is fed into a mechanical pump is released by gallons per minute to offer a heavy-duty cleaning solution ...
How to kill mold and mildew on wood siding?
Always use OxiClean powder to kill off mold and mildew before pressure washing. Use a detergent that is suitable for wood siding. Make sure your pressure washer is set to the lowest setting. Be aware of fixtures that can easily be broken from power washing. Keep calm and take your time.
What is Oxiclean used for?
OxiClean uses the power of oxygen and bleach derivatives to break down the barrier shells of algae, mold, and mildew from cedar siding. Brilliantly, this product is perfect for uncovering wood's natural beauty, which makes it a prime candidate for cleaning up grimy cedar siding.
How far away should you keep a power washing wand from siding?
You should keep the power washing wand at least two feet away from the siding and keep it angled a smooch as you can to prevent buckling. Be aware. Make sure to avoid directly spraying gutters, light fixtures, and other ornamentals during the pressure washing procedure.
How long does it take for wood siding to get dirt?
However, after a few months, you notice the dirt begins to accumulate, and after a year or two, your siding starts to lackluster.
How much does pressure washing cost?
Here is what Homeguide had to say about it, "Pressure washing prices range from $173 to $311 on average with most homeowners spending around $211 to hire a professional. Power washing a house costs $173 to $358, while pressure washing a deck or driveway ranges from $108 to $262.
Why is it important to power wash exterior wood?
Having a cleaner that does the majority of the work is the best you can ask for. Saving time , money , not harming the wood anymore than you have to, when you power wash is key.
What wood is best for exterior?
Some of the best woods for exterior applications are Cedar, Redwood, Cyprus, and treated wood from the lumber mills. Even these types of wood need proper protection, or will need to clean them back, at some point also. Not only painting, but cleaning, power washing, pressure cleaning decks, fences, and Cedar Sided homes is a key area ...
What is a semi transparent stain?
Many homes in the Colorado market have some portion of wood treated with a Semi-Transparent or Solid Body exterior stain . Stains protect decks, fences, cedar siding homes, and of course log homes. Leaving untreated, this wood will grey and blacken to later grow mold & mildew, deteriorating over time, in that order.
Can you powerwash cedar wood?
Getting grey out of the wood is and has been quite easy over the years knowing best Cedar wood protection today, with a wide variety of deck and wood cleaner products available on the market today. Power washing is good, the lighter you can do it. The harder, more forceful can damage the wood, taking off more top layers of wood.
