What is the your value of blue board insulation?
Dow STYROFOAM™ Scoreboard Insulation Board (Blue Board) 4 ft by 8 ft Sheet, 1.5" Thick, R value 7.5 A nonstructural, rigid board insulation manufactured of Extruded Polystyrene Foam (XPS). Dow Scoreboard is scored over 16" and 24" making it...
Is blue board water resistant?
Blueboards are somewhat water-resistant but not waterproof, and preferably should not be used for wet or damp applications. In fact, blueboards should only be used as an underlayment for veneer coat plastering, which is what the blue-colored paper is designed for.
What is the best insulation board to use?
Types of insulation boards
- PIR insulation boards. PIR boards (polyisocyanurate insulation) have a wide applicability and are perfectly suited to insulate a flat roof or a cavity wall.
- PUR insulation boards. Polyurethane (PUR) is one of the most efficient insulation materials on the market. ...
- XPS insulation boards. ...
- EPS sheets. ...
- Supple glass wool insulation boards. ...
What is the best thermal insulation?
- Installation thermal insulation staves off the chances of condensation formation in the interior surfaces that are palpably exposed.
- The problem of temperature variations can spring from uninsulated walls or roofs. ...
- Such installation offers a flat surface that could be used up as a substrate for membrane installation covering those steel decks. ...
Is blue Board polystyrene?
Originally developed by Dow Chemical, Blue Board is an Extruded Polystyrene (XPS), its blue color is a trademark of DuPont (DuPont de Nemours, Inc.).
Is blue foam insulation toxic?
Polyurethane Spray Foam Insulation This type of foam contains harmful chemicals and can be especially hazardous for workers during installation. Watch out for spray foam containing a chemical known as methylene diphenyl diisocyanate, or MDI, which can cause asthma and lung damage in exposed workers.
Is foam board insulation toxic?
Foam insulations commonly contain highly toxic flame retardants, and spray foam contains asthma-causing isocyanates. If foam insulation must be used, avoid products that are reacted on site, such as spray foam.
What are insulation boards made of?
What is Foam Board Insulation Made of? The most common types of material used to make foam board insulation include polystyrene, polyisocyanurate (polyiso), and polyurethane. Polystyrene is a colorless, transparent thermoplastic, according to the U.S. DOE.
What is the healthiest insulation?
5 Healthiest Insulation Options For Your HomeCork. When it comes to healthy insulation, cork tops the list, at least according to a report done by Energy Efficiency For All. ... FIberglass. ... Cellulose. ... Recycled Cotton. ... Sheep's Wool.
Is there FIberglass in foam board?
Fiberglass and rigid foam board are two of the most popular home insulation options currently available....Installation Process.CriteriaRigid Foam BoardFiberglassFormIt is typically available in the form of rigid panels.Available in loose particles or solid batts.4 more rows•Jan 20, 2022
Does foam board insulation offgas?
As an insulation it is non-toxic, and unlike foam products there are no blowing agents that will off-gas into your home. That means it can lead to cleaner indoor air quality, and the R value will never change, whereas foam products will deteriorate over time as the gases escape.
When was urea formaldehyde foam insulation banned?
It was used in approximately half a million homes in North America. UFFI was banned in Canada in 1980, and two years later it was banned in the U.S. because of fears concerning off-gassing of the formaldehyde, an irritating and potentially carcinogenic gas.
What insulation has formaldehyde?
fiber glass insulationFor more than 60 years, fiber glass insulation has been manufactured with a binder that contains formaldehyde. It's been used throughout the world as a safe and effective insulation material.
What is the difference between blue and pink foam board?
Both are manufactured using the same process and contain similar chemical components. The two products also have the same insulating power. However, blue foam boards are manufactured by Dow Chemical Co. whereas the pink foam boards are manufactured by Owens Corning company.
Are all insulation boards the same?
Not all insulation boards are the same. However, we understand that all the different types can be confusing. This post outlines some of the different types of rigid insulation, and highlights which might be the most suitable for your application.
What is the difference between polystyrene and polyisocyanurate?
With that being said, Extruded Polystyrene (or XPS or “Styrofoam”) can only be used in applications up to 165°F, whereas Polyisocyanurate (or PIR or “Polyiso”) can be used in applications up to 300°F.
What Is Blue Board?
As mentioned above, the blue board is a type of plaster that is more durable than drywall alone ( source ). You can find many uses for it, so long as you use it correctly.
How Are Blue Boards Used?
You have an assortment of options on how to use blue board in various settings.
Why does blue board dry faster?
Blue board dries faster due to the paper that is around the plaster. You need to be aware of this fact since you will need to move faster when building with this kind of drywall. If the gypsum dries too quickly, you won’t have much luck adhering other drywall or paint to the surface.
Why do you coat blue board with plaster?
You also want to coat your blue board panels with a plaster skim to make it less water absorbent.
What are the benefits of using blue boards?
These tips can help promote your success with your construction project. It can also save you time and wasted materials since you would need to replace any boards that you used incorrectly.
Why do we need blue boards?
Blue Board Can Help Reduce Noise. Due to its thickness, blue boards can provide noise-canceling effects. This feature can be useful for music rooms or recording studios. It is also great for bedrooms when you don’t want noise traveling all over the house. Blue boards aren’t only for the walls, either.
Why is blue board important?
Blue board can be significant assets to a project, so long as they are used correctly. Learning about the uses of a blue board can help promote the durability of any project. As well as the seamless finish when all is said and done. A successful project can promote your enjoyment of the finished product or your client’s happiness.
What is pink and blue insulation?
Pink and blue rigid foam insulation boards are made from polystyrene resin that is melted and then forced through a die to form it into the desired shape. As insulators, pink and blue boards perform virtually identically, with an insulating value of R-5 per inch of thickness. The two colors of board are sold under different brand names, however, and the two brands are differentiated mainly by the specialized variants within their product lines.
What is blue foam?
Blue foam products intended to be used as sheathing on exterior walls are faced with thin plastic films that protect the board's extruded polystyrene core and add extra strength to the board. Boards intended for interior walls are unfaced, but some of them include convenience features such as notches at the edges to accommodate wood nailing strips. Other blue foam products are designed for roofing or cavity wall applications. High-density blue foam products are designed to resist compression under heavy loads when they're used beneath concrete slabs.
Who makes pink foam board?
Pink foam board is manufactured by Owens Corning, and it's marketed under several different brand-specific product names, including Foamular, ...
Is polystyrene insulation more expensive than extruded polystyrene?
Expanded polystyrene insulation is less expensive than extruded polystyrene, but it is also more fragile and is a less effective insulator. Polyisocyanurate panels, also called ISO panels, consist of a rigid foam core sandwiched between foil or fiberglass facings.
What is blue board insulation?
DuPont Styrofoam™ Blue Board is a cost effective insulation that can be used in a wide variety of applications, including foundation walls, under siding and exterior sheathing, and between wall studs. Blue board needs to be covered with a thermal barrier on the inside or with siding or other covering to the outside.
What is blue board?
Originally developed by Dow Chemical, Blue Board is an Extruded Polystyrene (XPS), its blue color is a trademark of DuPont (DuPont de Nemours, Inc.). Other manufacturers make similar products but in other colors.
What is white finish thermosheathing?
White Finish Thermax™ offers a finished look without the need for additional covering or paint. White Finish Thermax™ has the exact same insulation properties as standard Thermax™ Sheathing.
What color is styrofoam?
This new version of Styrofoam™ is now a stylish Gray color.
Is blue board a good insulator?
Blue Board is available in a wide range of board styles, and thicknesses which share common characteristics. Being closed cell foam it makes a good insulator (typically R5 per inch) that is resistant to water damage and mold growth.
Can you use Styrofoam below grade?
DuPont Styrofoam™ can be used below grade and DuPont has specific products to channel water away from foundation walls.
Does blue board need a thermal barrier?
DuPont Thermax™ is a higher efficiency insulation that performs well in interior spaces. Since it doesn’t require a thermal barrier you can achieve a high R value without covering it and increasing wall thickness.
What is blueboard insulation?
Blueboard is a hard foam material that is used underneath various finishes, typically on the exterior of a home. The blueboard provides an additional layer of insulation, as well as protecting the materials that lay underneath it from moisture and eventual rot while adding insulation from extreme temperatures and temperature fluctuations.
What is blueboard used for?
Blueboard is frequently used as insulation and a moisture barrier in concrete basements as well. The blueboard should also be glued to concrete basement walls, but if this is any type of living area, should be installed in between wall studs and covered with drywall, or gypsum blue or green board ...
Why is blueboard important?
In combination with its surrounding materials, blueboard contributes to the overall R-value of the walls. R-value gives a measure of how energy efficient the home or building is, There are a number of reasons that the R-value is important, but primarily it will typically dictate what it takes to heat and cool the building or structure.
Is blueboard good for building?
Blueboard is very durable, easy to install, and can provide additional efficiency to the building, ultimately making it less expensive to maintain.
Can you use nails to secure blueboard?
Since the blueboard comes in a variety of thicknesses, different thicknesses can be combined to achieve the desired thickness. Blueboard should not be secured to a surface with fasteners such as nails or screws as this will compromise the R-value of the material.
Is blueboard combustible?
This is due to the fact that the blueboard is combustible, and will burn very hot and exude toxic fumes if it is set alight. In the case of using it in a laundry area or in the same room with a furnace, it may be wise to cover it with a drywall product even if it's not a "living area" as many home fires start in these areas. This will also enhance the value of the home, and make it that much more efficient if the blueboard is on the inside of the home as well.
When to use foam board insulation?
Because of its resistance to moisture, foam board insulation is a great choice whenever and wherever there is a chance it could get wet, such as: an exterior foundation, inside a basement against the foundation, and on the outside of a house beneath a house wrap. Foam board insulation is more expensive than traditional batt insulation, so use it only when moisture is a factor and it makes sense with your budget.
What is the best insulation for a batt?
Foam board insulation is a great alternative to the very common fiberglass batt insulation that is in most of our homes. It has a higher R-Value per inch of thickness, it’s resistant to moisture and is easy to work with.
What is polyiso foam board?
Polyiso (Polyisocyanurate). This is an even more dense and more expensive foam board insulation. It provides an R-value of 6 per inch of thickness and often comes foil-faced to help reflect radiant heat. Polyiso comes in several thicknesses and is used over house sheathing underneath siding or in attic spaces where its reflective properties are very effective.
What is EPS insulation?
EPS is used under roofing, over foundation walls and beneath siding. Extruded Polystyrene. This foam board insulation is the rigid pink or blue panels that can be found at home centers in many different thicknesses. It is denser than EPS and provides more R-Value with a rating of 5 per inch of thickness. This foam board insulation is available ...
What is the difference between pink and blue foam insulation?
If you are looking for an insulation panel that offers adequate protection and energy savings, you can choose the pink or blue foam boards. Both are manufactured using the same process and contain similar chemical components. The two products also have the same insulating power. However, blue foam boards are manufactured by Dow Chemical Co. whereas the pink foam boards are manufactured by Owens Corning company. The boards are marketed under different brand names. You’ve probably heard of the Styrofoam SM insulation products, this is simply a brand name for the blue foam boards. The pink foam boards are available in the market using different brand names including Propink, Insulpink and Thermapink which are all products from Owens Corning.
What is blue foam?
When To Use Blue Foam Products. Blue foam boards come with thin plastic films which protect the polystyrene core and also enhance the strength of the board. It’s no wonder they are commonly used for insulation on the exterior walls. There are blue foam boards that are designed for interior walls.
What is the R value of pink foam board?
They are both manufactured using polystyrene resin and perform virtually in a similar manner. They have an insulating R value of 5 per inch of thickness.
Can pink foam board be used on concrete?
There are those designed for interior walls whereas others work best on exterior walls. Pink foam boards can also be used beneath concrete slabs, roofs or foundation walls. When used for foundation wall insulation, the pink boards usually have drainage channels on the surface and a simple filtration system that prevents soil from clogging ...
Who makes pink foam boards?
However, blue foam boards are manufactured by Dow Chemical Co. whereas the pink foam boards are manufactured by Owens Corning company. The boards are marketed under different brand names. You’ve probably heard of the Styrofoam SM insulation products, this is simply a brand name for ...
Is expanded polystyrene insulation cheaper than pink and blue foam insulation?
There are also expanded polystyrene insulation products which are far less costly than the pink and blue foam boards. The major drawback to these expanded foam boards is that they are very fragile and have a lower insulating power. If you are looking for an effective insulator, opt for the pink and blue extruded foam boards.
What are the benefits of using rigid foam insulation?
Although it’s not necessarily better than fiberglass, it does have some advantages that can make it worth considering as a replacement to other insulation types. Here are three reasons why you might want to consider using rigid foam insulation in your home:
What is rigid foam?
When most people think of insulation, they picture fiberglass batts and rolls—and that’s perfectly okay. However, we often forget to consider all our options. There are many different types of insulation available to us. One type that may be unfamiliar to you is rigid foam.
