What is an asphalt apron? The term may also be used to describe an area at the end of a driveway that connects to the road. You may also see a concrete apron at a garage opening or we will sometimes put an asphalt apron on the end of a gravel driveway. Generally an apron is used to prevent surface distortion where one surface meets another.
How much does an asphalt apron cost?
A stamped asphalt apron can cost $5-$12 a square foot, or $900-$2,160 for 12'x15'. A concrete apron can cost $3-$10 or more a square foot, or $550-$1,800 for 12'x15'.
What causes an asphalt apron to settle?
Erosion of the base material creates a cavity under the apron, allowing the asphalt to settle. What can be done to fix my sunken apron by the garage?
What is a driveway apron?
The apron, also known as the approach, is the part of the driveway closest to the road and usually made from the same material as the rest of the driveway. Because driveway aprons are regulated by building codes in most communities, replacing yours—because it’s in bad shape or you’d like to widen the driveway—can be complicated.
What is a concrete garage apron?
The concrete garage apron is the concrete slab in front of the garage door and is used to transition the concrete or asphalt driveway onto the garage concrete floor. This is necessary as the two surfaces are on two different grades. The apron is between 2 to 6 feet wide and runs the entire width of the driveway and the garage door.
What is an apron in a driveway?
What is a driveway apron? It's the area where your residential driveway meets the street pavement.
What is the purpose of a garage apron?
The concrete garage apron is the concrete slab in front of the garage door and is used to transition the concrete or asphalt driveway onto the garage concrete floor. This is necessary as the two surfaces are on two different grades.
Why do driveways have aprons?
Driveway Apron means that portion of a regularly established driveway lying between a property line and any curb, the purpose of which is to provide vehicular access from the street across the curb, parkway and sidewalk to the property fronting thereon or abutting thereto.
What is an apron in construction?
An apron is a raised section of ornamental stonework below a window ledge, stone tablet, or monument.
Is a concrete or asphalt apron better?
Lifespan and Durability Overall, asphalt is less durable than concrete. With proper maintenance, it can last 30 years. Alternatively, concrete provides a sturdy, long-lasting option and can last homeowners 50+ years with occasional repairs and degreasing.
How do you repair an asphalt driveway apron?
Follow these steps:Snap a chalk line parallel to the garage door. ... Cut through the asphalt (it's usually 2 to 3 in. ... Remove the asphalt and dig a 12-in. ... Spread a 2-in. ... Install paver edging along grass edges and spread a 1-in. ... Set your pavers, compact them with the plate compactor and fill the joints with sand.
How thick is a driveway apron?
Acceptable material—concrete is the most common, followed by asphalt, and then pavers. The thickness of the apron. For example, concrete on the non-apron portion of the driveway should be a minimum of four inches thick, while codes may require the apron portion to be as much as seven inches thick.
How do you lay a driveway apron?
0:173:30How to Build a Driveway Apron | This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo make the cut use a concrete saw fitted with a diamond blade on the first pass make a shallow. CutMoreTo make the cut use a concrete saw fitted with a diamond blade on the first pass make a shallow. Cut then attach a garden hose to the saw.
How do you pour a driveway apron?
4:2824:19How to Pour a Driveway Apron Approach Part 1 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll we have to do is horizontal curb cut and then dig down six inches sidewalk approach and pourMoreAll we have to do is horizontal curb cut and then dig down six inches sidewalk approach and pour it's real real simple situation there all right let's get down to business.
What do you mean by apron?
Definition of apron 1 : a garment usually of cloth, plastic, or leather usually tied around the waist and used to protect clothing or adorn a costume. 2 : something that suggests or resembles an apron in shape, position, or use: such as.
What is apron slab?
What is an apron slab? An apron slab is a smooth impermeable surface constructed around a water point to prevent spilt water soaking into the ground.
What is culvert apron?
Apron: A hardened surface (usually concrete or grouted riprap) placed at either the invert of the culvert inlet or outlet to protect structure from scour and storm damage.
What is an apron in a driveway?
The apron, also known as the approach, is the part of the driveway closest to the road and usually made from the same material as the rest of the driveway. Because driveway aprons are regulated by building codes in most communities, replacing yours—because it’s in bad shape or you’d like to widen the driveway—can be complicated.
How long is a driveway apron?
Driveway aprons vary in length from about eight to 15 feet (starting at the street and measuring toward the house). Since the apron is a part of the driveway, its width (side to side) is identical to the width of the rest of the driveway—most of the time you can’t tell where the apron starts and the driveway stops.
What is curb cut?
A curb cut is where the existing curb is cut away to allow vehicles to enter the driveway. While communities are picky about driveway aprons, they’re even pickier about curb cuts because a system of curbs and gutters is a part of a larger drainage system. If you want to install a brand new driveway, not only will you need to follow codes ...
What to do if your driveway apron is bad?
If your driveway apron is in bad shape (presenting a danger to pedestrians), the local Code Compliance officer may ask you to have it repaired, which may include patching it (to the city’s standards) or replacing it. If you don’t, the city could fix it and then charge you for the repairs.
How big should an apron be for concrete?
If you’re pouring concrete, consider pouring the apron in sections no larger than eight-foot by eight-foot instead of all at once. Pouring concrete is physically demanding and smaller sections are easier to pour. Recruit plenty of helpers when pouring concrete.
How much does it cost to install asphalt?
Asphalt, which must be installed by a paving company, runs approximately $3 to $6 per square foot. The company may also charge a setup fee, which could add another $1,000. Expect to pay $3 to $10 per square foot for materials if you want to install a paver or cobblestone apron.
Where is the apron on a sidewalk?
If sidewalks are present, the apron typically extends to the edge of the sidewalk closest to the house. In many communities, the area on the street side of a sidewalk is considered an easement that the city controls. This is the area where you’ll find buried municipal water lines and storm drains.
Asphalt Apron Repair
You could choose to extend your Apron out as far from your garage as you would like, we recommend 2-4ft max, or a line that matches an existing sidewalk. Most importantly keeping the drainage of water in mind.
Asphalt Apron Repair
You could choose to extend your Apron out as far from your garage as you would like, we recommend 2-4ft max, or a line that matches an existing sidewalk. Most importantly keeping the drainage of water in mind.
Why do you tie an apron to a garage slab?
He ties the apron to the garage slab with rebar to prevent it from separating, which could create a large and uneven gap. It’s a given that a bunch of you masons out there are going to insist that you should never join exterior concrete to an interior slab.
How long does Glenn wait to seal the apron?
Glenn waits to seal the apron until after the expansion joints are cut. That way he can saturate down in the crevice where water can accumulate. If he can’t get to the apron right away after it sets up, he seals it immediately after pouring and reseals the in the crevice after the joints are cut.
Does Gorilla Tape work?
Gorilla Tape Works Great. Glenn has found that Gorilla Tape works best because it’s tough and adheres better to a dirty surface than other tapes. Also, don’t forget to warn the homeowners and neighbors to keep an eye on their kids and pets.
Where is the driveway apron located?
The driveway apron is usually located on the public right-of-way, but the homeowner is typically responsible for maintaining the apron and any drainage pipes beneath the apron. Local regulations, including neighborhood covenants, may require specific apron materials. For example, Las Lunas, NM [ 1] specifies that a driveway apron must be ...
How long is a driveway apron?
A driveway apron is the section where a private driveway connects to the public roadway; it is usually the width of the driveway and about 8'-15' long (extending from the curb to the far edge of the sidewalk, or to the property line), although some decorative aprons can be 60'-70' or longer.
How much does a paver apron cost?
A concrete paver apron typically costs $3-$12 a square foot for do-it-yourself materials and equipment rental, or $550-$2,160 for 12'x15'. With professional installation, the cost is typically $6-$20 or more a square foot, or $1,100-$3,600 for 12'x15'. A professionally installed brick paver apron generally costs $10-$30 or more a square foot, ...
Who installs driveway aprons?
Driveway aprons are typically installed by asphalt, concrete, masonry or paving contractors, although general building or landscaping contractors make take on the task as part of a larger project, and sub out the work.
How much does a cobblestone apron cost?
A cobblestone apron typically costs about $1,800-$4,500 for do-it-yourself materials for an average 12'x15' apron, or $3,600-$12,600 with professional installation. Paving contractors typically do not charge by the square foot, but instead quote their total price for a specific project. What should be included:
What is a Concrete Garage Apron?
The concrete garage apron is the concrete slab in front of the garage door and is used to transition the concrete or asphalt driveway onto the garage concrete floor. This is necessary as the two surfaces are on two different grades.
Why do you Need a Concrete Garage Apron?
The concrete garage apron is necessary to provide a transition between the driveway level and the garage floor. The driveway is not always level with the garage floor.
How do I make a Concrete Garage Apron?
Preparing the grade and pouring concrete for a garage apron is not much different from pouring a “slab on grade”. Of course there are a few differences. Here is what you need to do.
Bottom Line
The bottom line is that the concrete garage apron is an important link between your garage and your driveway. Specifically it
