US5848641A - Well pump puller - Google Patents An apparatus for raising and lowering a submersible pump in a well. A cylindrical drum for reeling flexible water pipe is mounted for rotation at one side of the well.
What is a well pump puller used for?
Our well pump pullers are best used to repair broken well lines, broken electrical wires, or replace a well pump entirely. This tool has a 500lb capacity and includes a plastic well pipe up to 700 feet or a metal pipe that wells up to 400 feet.
What is the capacity of a well pump pull tool?
This tool has a 500lb capacity and includes a plastic well pipe up to 700 feet or a metal pipe that wells up to 400 feet. If you are interested in using our well pump pulling tools or even purchasing your own, contact our team today!
Can I rent a well pump puller?
That way, you can have peace of mind knowing that your well pump puller rental is in the best possible condition. Our rental services include a daily, weekend, or even weekly rate for your convenience. If you would like to purchase a well pump puller, we offer two different models below for you to choose from.
How do you remove a pump pull machine from a well?
Remove the top part of the pump pull machine. Pump pull machines are hydraulic machines that work by grabbing the top of the pump pipe and pulling it upwards. Once you have your machine out and ready, remove the top part that attaches to the top of the pipe and set it on top of the well cap opening.
How do you use a well puller?
2:466:31Once you have tightened the legs lift the top portion and set it up on the ground swing the legsMoreOnce you have tightened the legs lift the top portion and set it up on the ground swing the legs around so its weight is evenly spread.
What does pulling a well mean?
A pulling unit is called in when a wellbore shows signs of internal damage, such as an obvious leak or a sudden drop in pressure of the drilling fluid at the surface.
How do you make a well puller?
2:574:59But I got it to where I can do it pretty simple. At the top we just got a pulley off of an old swampMoreBut I got it to where I can do it pretty simple. At the top we just got a pulley off of an old swamp cooler motor. Right at the very top with a bolt running through for a pulley up there.
How do you pull a deep well?
1:1818:03From now on first things first gotta pull it out somehow research reveal that I have to turn thisMoreFrom now on first things first gotta pull it out somehow research reveal that I have to turn this nut clockwise to get the pitless adapter to release pulling a deep well pump is no easy task.
How deep should a well be for drinking water?
100 feet deepFor drinking water wells it's best to be at least 100 feet deep so that surface contaminants cannot enter the well. The average well depth for private homes is between 100 to 800 feet [2]. You may need a deeper or shallower well if your area has different geology than another region of the country.
How do you pump water out of a well?
3:2011:23Two pumps two solar pumps in the well. And a hand pump so I can hand pump. This. And get a hand pumpMoreTwo pumps two solar pumps in the well. And a hand pump so I can hand pump. This. And get a hand pump some water for you Oh imaginet I can hand pump - how far was the input.
How do you get water out of a well without electricity?
The sleeve bucket is the simplest and cheapest way to get water from your well without electricity. Also known as torpedo or cylinder buckets, the modern-day “well bucket is simply a long, skinny bucket that can be lowered into the narrow confines of a well casing to bring water to the surface.”
What tools do you need to pull a well pump?
In order to pull all of this stuff out of the well, you need a special tool called a "pitless adapter wrench." It's basically made of three pieces of threaded, metal pipe that you can get from any hardware store.
How long does it take to replace a well pump?
Both submersible and above-ground well pumps take 2-4 hours to replace. Submersible well pumps may take longer to replace than above-ground well pumps, as they are more difficult for the service technician to access.
How long will a well pump last?
8 to 15 yearsDepending on the equipment type and model, well pumps typically last anywhere from 8 to 15 years. However, several factors can contribute to the premature expiration of a well pump.
Where is my well pump located?
A submersible pump is placed below the water line in your well and also includes a pump motor. An internal check valve regulates water flow and a submersible system may or may not include a pressure tank based on available water flow.
What size well pump for a 400 ft well?
four-inchIf the depth of your well is between 25 and 110 feet, you should use a deep well jet pump. If the depth of your well is between 110 and 400 feet, use a four-inch submersible pump. Remember, you can also use a submersible pump for wells as shallow as 25 feet.
How does a pump pull machine work?
Pump pull machines are hydraulic machines that work by grabbing the top of the pump pipe and pulling it upwards. Once you have your machine out and ready, remove the top part that attaches to the top of the pipe and set it on top of the well cap opening.
How much does a submersible well pump weigh?
If your well is 100 feet (30 m) deep, the pump usually weighs around 100 pounds (45 kg). Deeper wells can have pumps that weigh up to 300 pounds (140 kg). If your pump is too heavy to lift by hand, you’ll need a truck with a crane to help you out.
What is a submersible pump?
A submersible pump is a water pump that has to be submerged underwater to work. A deep well submersible pump is one that’s deep underwater, meaning the water has longer to travel. Usually, deep well pumps are situated so low because the water table is low.
How far down can you pull a well pump?
The local well driller can pull it for you, but that could cost big bucks. If your pump is less than 100 feet (30 m) down, you can probably pull it up by hand with some help from a friend. If it’s further down than that, you may need a pump pull machine to help you out.
How to get to a well cap?
Put on non-slip gloves, work boots, thick pants, and safety glasses, then clear a 10 feet (3.0 m) radius around your work area to stay safe . Remove any large rocks or shrubbery that might get in your way. Make sure the machine or vehicle you’re using has a clear pathway to get to the well cap and back.
Can you pull a well pump out by yourself?
If you aren’t sure how deep your well is, get your property records from your local building department. You can absolutely pull your pump out by yourself; however, it is tough work, and you can damage the pump in the process.
What is a spearing tool?
Spearing tools are used to retrieve piping from a well when it cannot be grasped with an external catch tool. Taps or Taper Taps are conical-shaped threaded devices used to retrieve pipes or tubing from a borehole by turning the tap into the open end of a pipe or tube dropped into the bore.
What is a grappling hook?
Grappling hooks are sometimes used to try to hook onto tools, or other non-pipe-shaped items that have fallen into a well. Magnets or junk magnets, are sometimes used to retrieve smaller metal objects that have fallen into a well; it's doubtful that a magnet could pull a steel well pipe however.
What is a tap winch?
Taps or Taper Taps, (shown above) are hardened steel tapered coarse-spiral-threaded taps that are turned into the open end of a pipe to retrieve it from a well.
What is a junk grabber?
There are just a few basic types of pipe or junk grabbers used to pull stuff out of oil or gas or water wells: Augers are drill-type devices designed to retrieve drill components from a borehole by drilling into a verical (dropped) pipe or by wrapping around it.
What is a dropped tool fishing tool?
This article has a nice section on well pipe or dropped tool fishing tools ( WELL RETRIEVAL TOOLS) at its end. If a tool is dropped into a well or if a section of well piping becomes disconnected and drops into a well, special devices can be lowered into the well to attempt to grasp or hook the lost object (or pipe) to pull it back out of the well. See http://www.fao.org/docrep/X5567E/x5567e05.htm#4.11%20problem%20solving
What is a corkscrew?
A home-made "corkscrew" that increases in diameter towards its upper end, affixed to the end of a rigid pipe can also be pushed into the interior (or with some grapplers the outside) of the pipe in the well, turned until it grabs the pipe.
What is a die collar?
Die Collars - used to retrieve a lost well pipe, the die collar is a coupling lowered over the lost pipe; the gas or oil version may not be easily workable for a plastic water well pipe; see our "double bite metal loop" pipe retriever discussed below.
What is a 3 jaw puller?
3-jaw – The most universal of pullers, the 3-jaw puller has three articulating arms that have both internal and external hooks. You can use them to remove gears, pulleys, wheel hubs, all kinds of hard to remove parts. They come in several sizes and are inexpensive.
How many holes are in a steering wheel puller?
A steering wheel puller typically has four slotted holes to match the common two and three hole spacing for steering wheels. The center stud has a free-spinning spindle on the end to keep it aligned. These kits also come with an assortment of bolts to match your wheel as well.
What is a pulley installer?
Pulley – The pulley installer is another must-have for any DIY garage. Most commonly used for power steering pumps, this puller uses a notched hub and eccentric ring with the ever-present center stud to grab the notch at the pulley’s center (most press-fit power steering pulleys have this) and pull the sucker off.
What is a pickle fork?
Pickle forks tend to damage parts, so those are out. These tools are a one-piece cast or forged U-shaped tool that locks over the steering arm or drag link and the center stud is threaded in to press the joint out. They work very well and are affordable.
What tool to use to remove crankshaft damper?
Just be careful, because they tend to pop loose. Balancer tool – Late model Chevy and Chrysler engines have unique crankshaft damper/pulleys, which need to be removed for certain jobs. Much like a 3-jaw puller, this specialty removal tool has three hooks to latch onto the special locations on the balancer.
How to keep press studs centered?
You might want to flip the castle nut over and roll a few threads onto the joint to help keep the press stud centered, as they can walk off the joint and booger the threads. These tools are used for removing tie rods, pitman arms and in some cases, ball joints. Slip it over the joint,. thread the spindle to the stud and tighten until pops loose.
Is a 2 jaw puller bad?
The operate in the same manner as a 3-jaw. A typical 2-jaw puller. Steering wheel – Pulling the steering wheel is a complete pain, but with the right tool, it is not that bad.
