Full Answer
What is the standard size of a triple square bolt?
Common sizes are 6, 8, 10, and 12 mm. Triple square drives are used in high torque applications, such as cylinder head bolts and drive train components. Triple square fasteners are commonly found on German vehicles such as Audi, BMW, Mercedes, Porsche, and Volkswagen."
What is a triple square?
Triple square is as it sounds: three squares all at 90-degree angles. The former is used in bicycles, motorcycles, vehicles, and computer systems. Triple squares tend to be most prevalent on vehicles. Despite common misconception, they are not the same thing.
What is a triple square bit?
Triple Square Bits. Triple square, also known as XZN, is a type of screw drive with 12 equally spaced tips, each with a 90 degree angle. Its name derives from overlaying 3 equal squares to form such a pattern with 12 right-angled tips. Click to see full answer. Keeping this in view, what is a triple square bit used for?
How do you remove a triple square bolt?
The triple square is also known as the XZN. If you look at the top of the bit, it is three squares placed at a 30 degree rotation. Using an angle grinder (very gradually) to grind off two sides (four sides if you're good) to get a spanner/wrench around the head of the bolt.
What are triple square bolts?
Triple square, also known as XZN, is a type of screw drive with 12 equally spaced tips, each with a 90 degree angle. Its name derives from overlaying 3 equal squares to form such a pattern with 12 right-angled tips.
What is the difference between Torx and triple Square?
Torx comes in the start-like shape, while the Triple Square has three squares at all 90-degree angles. Trox use for motorcycles, vehicles, computer systems, and bicycles. At the same time, Torx only uses for vehicles.Apr 3, 2021
How do you remove a triple square bolt?
2 AnswersUsing an angle grinder (very gradually) to grind off two sides (four sides if you're good) to get a spanner/wrench around the head of the bolt.Heat the bolt (then let it cool) before attempting to undo it with the spanner to break the lock-tite.May 12, 2014
Is spline socket same as Triple Square?
Super Moderator. XZN and triple square are the same thing,if you try and use a Torx bit to remove these you'll almost certainly damage the head of it,as not only are there a different number of splines,they're also at a different angle to Torx bits. Chris.Sep 12, 2008
Does Triple square fit hex?
1:162:28BIG differences between (triple square) (star) bits and (hex) bits - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then when you try to take it off you'll just strip all the little points off there rounder isMoreAnd then when you try to take it off you'll just strip all the little points off there rounder is the triple square right next to the hex. Bit or the allen keys.
Are star bits and Torx bits the same?
The difference between Torx Bits vs Star Bits is that Torx is the trademark name, while star represents the generic descriptor – the terms can be used interchangeably, as the tools are identical.Dec 22, 2021
What can I use to remove a square bolt?
1:018:04removing square-headed screws w/o proper bit or a kreg jig bit - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhich you hit with a hammer. And you can put various heads on it this is the only one i have. AndMoreWhich you hit with a hammer. And you can put various heads on it this is the only one i have. And then hit it with a hammer. And it will slowly turn the screw head.
How do you remove a rounded off spline bolt?
0:112:05How to Remove a Stuck Bolt , Rounded Torx ( Stripped Rusted ...YouTubeStart of suggested clipEnd of suggested clipHeat it up a little bit then spray some penetrating fluid. Once it cooled down you should be able toMoreHeat it up a little bit then spray some penetrating fluid. Once it cooled down you should be able to remove it or at least twist it a little bit like in my situation.
What is a triple square socket?
The triple square, also known as XZN, is a type of screw drive with 12 equally spaced tips, each with a 90 degree angle. Its name derives from overlaying 3 equal squares to form such a pattern with 12 right-angled tips. Common sizes are 6, 8, 10, and 12 mm.Apr 12, 2013
Is XZN Triple Square?
XZN/Triple Square fasteners are mostly common on Cylinder head bolts, Retaining Bolts, Drive train components, Door hardware, Disc brake calipers, and other applications....BrandLEXIVONItem dimensions L x W x H25.1 x 12.4 x 4.8 centimetresSizeXZN 10pcMaterialMetalDrive systemTriple Square
What is spline drive sockets?
A spline socket is designed to tighten and un-tighten spline fasteners but is also ideal for use on 4-point, 6-point (hex) and 12-point (bi-hex) fasteners, making them a useful socket to use across multiple shaped fasteners.
Alloy Steel 12-Point Screws
Good for high-strength fastening, these screws are made from steel comparable in strength to Grade 9 steel. Use them for heavy duty stamping applications as well as earth-moving machinery, such as bulldozers and excavators. The head makes 12 points of contact with a wrench to handle more torque than a socket head or hex head screw.
Stainless Steel 12-Point Screws
These hardened stainless steel screws combine excellent corrosion resistance with strength comparable to Grade 9 steel. Use them for heavy duty stamping applications as well as earth-moving machinery, such as bulldozers and excavators. The head makes 12 points of contact with a wrench to handle more torque than a socket head or hex head screw.
Why use triple square bits?
The reason for the implementation of triple square bits is due to the high torque applications that vehicles can require. When it comes to drive train components and cylinder head bolts, the triple square bit offers a higher allowable torque to remove even the toughest or most seized components. Versatile use.
What are triple square bits made of?
Heavy-duty construction. The vast majority of triple square bits are also made of chrome-plated vanadium.
Why are Torx bits so popular?
Versatility. Torx bits are also more widely available than in the automotive world. Because of the improved torque capacity and protection against cam-out, they have become popular in the construction world.
What is the difference between Torx and Triple Square?
They may seem the same, but there are important differences. It can be difficult to spot the differences, however. Torx has a star-shaped head to its bit. Triple square is as it sounds: three squares all at 90-degree angles. The former is used in bicycles, motorcycles, vehicles, and computer systems.
Why are Torx bits better than other bits?
Because of the improved fit and its ability to take on larger torque capacity, Torx bits tend to make removal easier. Not only is that better for the user, but it is better for the overall durability of the bits themselves. There is a reason why Torx bits tend to last a long time. Versatility.
When was Torx bit made?
The Torx bit was created back in 1967 and has become characterized by its 6-point star-shape. They cannot be removed with standard Philips or flathead screwdrivers, limiting their accessibility to those without the right screwdrivers.
Is triple square Torx?
While Torx can be used for construction applications, triple square is pretty much exclusive to the automotive world. That said, there are some distinct advantages to using Triple Square.
