Receiving Helpdesk

what is a g3 on a deer antler

by Keven Grant Published 3 years ago Updated 3 years ago

between Points G1 & G2. H3 - Smallest Circumference. between Points G2 & G3. H4 - Smallest Circumference. between Points G3 & G4.

Full Answer

What does G1 G2 and G3 mean on an antler?

Gs– The letter G is used to name normal antler points. G1 refers to the first point on an antler. This is typically the location of the brow tine (if the brow tine is missing, the G1 is missing). G2 is the next tine, then G3, and so on (see photo above). A normal 8-point buck would have a G1, G2, and G3.

How do you measure the G4 on a deer antler?

If the G4 is an abnormal point, take the H4 measure on the main beam exactly halfway between the G3 and the tip of the antler. 2. If the G4 is a normal point, the H4 measurement would be the smallest circumference of the main beam between the G3 and the G4.

What are the parts of a deer antler called?

Burr – Bony rim of the pedicle. Brow Tine – The point at which the first antler branches off. Bay Tine – The second branching-off point. Tray Tine – The third branching-off mark. Surroyal Tine – Fourth branch on a separate tine of a deer’s antler.

What is a G2 on a buck?

G2 is the next tine, then G3, and so on (see photo above). A normal 8-point buck would have a G1, G2, and G3. A normal 10-point buck would have a G1, G2, G3 and G4. The end of the main beam IS NOT referred to as a G, although it does count as a point.

What does G mean in deer antlers?

Gs – The letter G is used to name normal antler points. G1 refers to the first point on an antler. This is typically the location of the brow tine (if the brow tine is missing, the G1 is missing). G2 is the next tine, then G3, and so on (see photo above). A normal 8-point buck would have a G1, G2, and G3.

What does the G stand for in scoring a deer?

A rack is measured in different stages and in a specific order: number of points (A), tip-to-tip spread (B), greatest spread (C), inside spread (D), total length of abnormal points (E), length of main beam (F), length of points (G), circumferences (H).

How rare is a 3 antlered deer?

While a three-antlered deer is, indeed, rare — it's not unheard of. Steve Edwards, a large animal vet at Michigan's Lakeview Animal Clinic, told the Detroit Free Press the buck is "probably a one-in-a-million thing."

What is a good deer antler score?

For a typical whitetail, meaning the antlers are symmetrical, the minimum score is 125 inches. A non-typical whitetail must have a minimum score of 155 inches for entry. A typical mule deer has to tape out at 145 inches or greater, while a non-typical muley is eligible at 170 inches.

What does G2 mean on a deer?

Typically with a whitetail deer, the G2 and G3 are the longest tines, but that isn't always the case. Each tine that comes off the main beam gets measured and added to the total score. As you can see in the image above, this typical 8-pointer has a G1 (brow tines), G2 (2nd tine on main beam), and a G3 (3rd tine).

What is considered a trophy buck?

5.5- to 6.5-Year-Olds—This is a mature whitetail in its prime. They are at the height of their weight, antler size, strength, and cunning. These are animals that know how to survive and are extremely challenging to hunt. Without a doubt, these are trophy whitetail deer.

Can deer have 3 antlers?

Steve Lindberg, an amateur photographer in Michigan, snapped a picture of a rare deer that appears to have 3 antlers sprouting from its head. The former U.S. state representative ventures out daily to take photos of wildlife near his home in Marquette, Mich.

What does it mean when you see a buck?

As can be seen, deer symbolism varies from culture to culture. But, it typically means gentleness, awareness of surroundings, unconditional love, and mindfulness. A deer represents innocence, kindness, grace, and good luck. Seeing a deer is usually a good omen and means that your spirit guides are watching over you.

What does a 3 point buck mean?

So just count the standing normal points on the main beam to quickly determine the number of points. A buck with two standing normal points per side is an 8-pointer, one with three standing points is a 10-pointer, and so on.

Is a 140 inch buck big?

By comparison, most hunters consider a buck whose antlers score 120 inches in B&C system to be desirable. A 140-inch buck is a slammer, and a 150 is the buck of a lifetime for about 99 percent of today's hunters.

How do you read deer antlers?

Basic Antler TerminologyBeam – Central stem of the antler.Burr – Bony rim of the pedicle.Brow Tine – The point at which the first antler branches off.Bay Tine – The second branching-off point.Tray Tine – The third branching-off mark.Surroyal Tine – Fourth branch on a separate tine of a deer's antler.More items...•

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9