Similarly one may ask, what is a cut sheet in construction? A cut sheet, often also referred to as a spec sheet, provides and describes the specifications of a particular product, service or property.
What is a cut sheet in construction?
04/01/2020 · What is a cut sheet in architecture? Basically " cut sheet " is a printing term meaning a sheet of paper which has been printed and cut , thus ion contrast to continuous sheets . In practice, in the procurement context, it has come to mean a loose-leaf printed sheet containing a product description.
What is a plane cut in architecture?
14/02/2021 · A cut sheet (also known as a spec sheet or specification sheet) is an equipment information sheet that provides and describes the specifications and/or features of a piece of equipment. These are common in the electrical industry for equipment such as motors, circuit breakers, transformers, and other electrical equipment.
What is a section in architecture?
25/03/2020 · A cut sheet, often also referred to as a spec sheet, provides and describes the specifications of a particular product, service or property. Most purchased goods have a cut sheet included in the box. Many cut sheets include a photograph of the product as well as a list of parts.
What is a section cut in geography?
03/10/2014 · A cut sheet is a general term for a few pages of specifications, instructions, dimensions, etc. that apply to a certain technical product or product line, generally shipped with the product.
What is a cut sheet?
Cut Sheets: Defined A cut sheet, also known as a data sheet, technical data sheet, and/or specification sheet, is a document that summarizes the information and characteristics of a product, material, or piece of equipment.21-Sept-2017
What is a submittal cut sheet?
A submittal refers to the written and/or physical information provided by a responsible contractor (i.e., contractors and subs) to the general contractor. ... Submittals can be presented in various formats, such as shop drawings, cut sheets on equipment, and material samples.23-Aug-2021
What is a cut sheet for doors?
Cut Sheets are product-specific data sheets that describe the features and options of the product type. Where applicable, it shows hardware selections, configurations and finishes as well as sizes and performance details.
What is the difference between a transmittal and a submittal?
The main difference between submittal and transmittal is that submittal is a document, sample, or any other information that is presented for review or consideration, whereas transmittal is a document that is sent along with other documents or files.30-May-2021
What is the difference between submission and submittal?
“Submittal” is the act of submitting; it should not be used to describe the thing being submitted, as in “clip a five-dollar bill to your submittal and it will receive our earliest attention.” In almost all cases “submission” is clearer and more traditional than “submittal.”31-May-2016
What is staved lumber core?
Stave lumber cores are assembled using blocks or strips of wood that are from the same species. This creates a durable core that is lighter in weight than particleboard.29-May-2018
What is a survey drawing?
Survey drawings are often the first type of drawing an architect or designer will work and engage with, and represent a measured and accurate record of the existing site and the buildings occupying it. This helps the architects to identify existing site levels and features that can be adopted, removed or altered.
Why do architects draw record drawings?
Record drawings are made by architects to understand existing projects. For instance, in the renaissance period, architects would create record drawings of buildings that remained after the Greco-Roman civilizations. They then use these drawings to influence their own designs and projects. Working drawing.
What is architectural drawing?
An architectural drawing whether produced by hand or digitally, is a technical drawing that visually communicates how a building and/or its elements will function and appear when built. Architects and designers produce these drawings when designing and developing an architectural project ...
Which software has the largest market share in architectural design?
AutoCAD has the largest market share of architectural design applications. One would also have to be on the lookout for trends and technological advancements to keep their knowledge and skills relevant as time passes. Architecture is a broad field that leans on technical skills in art, and mathematics.
Is Microstation compatible with Archicad?
Microstation is easier to use and has many features that relate to real-world architecture. The only problem is that users might face AutoCAD compatibility issues with Microstation. Archicad. This software is both a 2D and 3D design application that can help you with total project output.
What is a floor plan?
A floor plan is essentially a map showing a buildings internal arrangement in relation to its external walls and environment. Each floor or level of the building will require its own plan, which as a rule of thumb is a horizontal slice taken across the building at 1200mm above its floor level.
What is elevation drawing?
Elevation. In short an elevation is a drawing of an interior or exterior vertical surface or plane, that forms the skin of the building. Externally an elevation is most commonly used to describe the vertical interface between ...
What is a plan in architecture?
Plans are a common design drawing and technical architectural or engineering convention for graphic representation of architecture. With the exception of plan perspectives, ...
What is elevation drawing?
Elevations are a common design drawing and technical architectural or engineering convention for graphic representation of architecture. Elevation drawings are orthographic projections. This means they are not drawn in perspective and there is no foreshortening. There are different types of Elevation Drawings:
What is section in engineering?
Sections are a common design drawing and technical architectural or engineering convention for graphic representation of architecture. Section drawings are orthographic projections (with the exception of section perspectives). This means they are not drawn in perspective and there is no foreshortening.
What is a plan detail?
Plan Details. Details in architectural drawings are large scale drawings that typically show how something is built. Details identify all the materials and connections for construction. Details are normally 3/4″ = 1′-0″ or larger. Plan details are drawn in a plan view at a large scale to show the construction.
How high is a plan cut?
The plan is typically cut at a height of about 4 feet , but the architect drawing the plan may cut it at a different height. This means that you have an imaginary plane cutting through the building at an elevation of 4 feet above the floor. Therefore, you see in the cut anything that the plane passes through.
What is site plan?
Site Plan. A site plan may or may not be drawn cutting through the building. A site plan is going to show more than just the building, including the entire site the building is located on. This can show the property lines, the building location, utilities, roads, landscape etc.
What is a reflected ceiling plan?
A Reflected Ceiling Plan is a plan of the ceiling within a space. This is drawn looking down as if there is a mirror on the floor reflecting the ceiling. The reflected ceiling plan is often referred to as an RCP. This architectural drawing will show things light lighting, structure, ceiling heights, soffits, etc….
Why is a discipline designator important?
The discipline designator helps to identify the type of work that is included on the sheets. Since sheets are distributed to the different sub-contractors in the field, it is helpful for the drawings to be organized by discipline.
What are the components of sheet numbers?
There are three components that make up sheet numbers in a set of construction documents. The first two letters, the discipline designators, identify the construction discipline that the sheet covers - architectural sheets, plumbing sheets, structural sheets, etc. The third digit, the sheet type, is a number ...
Do structural drawings belong before or after architectural drawings?
Many architecture offices have their own standards with regard to the order of sheets in a construction document set and most architects are quite opinionated about whether the Structural drawings belong before or after the Architectural drawings. However, American clients sometimes demand that architects follow the United States National CAD ...
What is the third digit of a sheet?
The third digit, the sheet type, is a number that represents the type of drawings that are on the sheet - plans, sections, details, schedules, etc. The final two digits, the sequence numbers, are numbers that simply place the sheets in order. Each component is explained in more detail below.
Can you separate electrical and lighting drawings?
For instance, on a complex hospital job with hundreds of sheets, it may be helpful to separate the electrical lighting drawings from the electrical power drawings. On a small residential project with a few dozen sheets, it is probably easy to have the lighting and power on the same sheet or sequential sheets.
What is sheet type?
Sheet Types. The Sheet Types designator takes the drawings of a single discipline and organizes them. Drawings are always organized from most general to most specific or specialized. Since plans are most helpful to see the overall design of the project, they come first.
