How much does a Douglas fir stud cost?
The Douglas-fir stud, which cost $3.22, was stamped by the Western Wood Products Association, meaning it came from the West Coast (and I live on the East Coast). The spruce stud, priced at $2.84, was stamped by the Maritime Lumber Bureau of Eastern Canada, New York, and the New England states.
What does KD-HT mean on Douglas Fir studs?
That’s a lot of water weight. The spruce is stamped KD-HT. KD means kiln-dried to at most a 19% moisture content.
Is Douglas Fir a stud grade?
Both were stud grade, but one was Douglas fir, and the other was spruce. Both are acceptable for use in a stud wall, but Douglas fir is a stronger, more stable species. Another reason for the cost discrepancy also could be found on the stamp.
Who is Monsignor Burrill?
Monsignor Burrill was the top administrator for the US Conference of Catholic Bishops (USCCB), the highest-ranking priest in the US who is not a bishop. Burrill was elected in November 2020 as the USCCB general secretary, a position in which he coordinated various administrative matters.
Why did Burrill resign?
A spokeswoman for USCCB told the Washington Post that Burrill chose to resign after allegations of "improper behavior" were brought to the Conference by Catholic media.
What is Grindr?
Grindr is a location-based social networking and online dating app for gay, bi, trans and queer people.
What type of lumber is used for a header?
Framing lumber varies depending on availability and location. Occasionally a specific type of framing lumber is specified when a specific strength is required, such as for headers, trusses, or load bearing walls.#N#Generally, you find SPF lumber in most places. A combination of Spruce / Pine / Fir. This lumber is at the bottom of the strength scale as far as tensile strength is concerned. It's good for studs because all the weight bears down on the lumber. It is not as strong as other types of lumber when used in a header. Not sure, but I think spruce and fir are a little stronger than pine because they are slower-growth and therefore are a little more dense.#N#Other types of lumber from weakest to strongest are Hemlock, Hem-Fir, SYP (southern yellow pine), Douglas Fir, Doug-fir-larch.#N#For what you are working on, looks is probably the most important thing... I wouldn't worry about anything else for that project. If you are concerned about the holding power of your fasteners, screws and such will certainly pull out of SPF and other types of softwood lumber as well. As far as screws are concerned, they hold best in hardwoods like oak, cherry, hickory, etc.
Do fir studs stay truer?
My observation is fir studs stay truer longer. I've bot standard grade 2x4s from HD that warped after a week while the fir stayed true.
What kind of wood is used for tulip trees?
Many home improvement centers and other locations will sell other types of softwood under this label. In fact, you may believe that you are purchasing whitewood lumber from the tulip tree, but you are actually receiving spruce, fir, pine, or some other type of coniferous wood.
Who is Thomas Luttrell?
Specializing in building and renovating homes, Thomas Luttrell has worked in homebuilding since 2002. He also holds a bachelor's degree in English from Iowa University.
What is fir used for?
They are both widely used in the building industry to provide lumber and plywood for homes and framed structures as well as to provide wood for cabinets and woodworking projects.
Which is stronger, fir or pine?
The soft wood between the grain lines shrinks and expands, making the wood cup or twist. Fir has little soft grain. Pine has much more soft grain. For stability and strength, fir is much less prone to warping or twisting, and much stronger than pine.
What Is Fir Lumber?
Fir lumber is commonly sold in three different ways in the US, and only one of these is likely to have much true fir in it, although it’s just as possible not to have any.
What Is Pine Lumber?
Pine lumber is sourced from species in the genus Pinus, in the family Pinaceae. The genus contains about 120 species, most of which are trees.
How Are Fir And Pine Lumber Different?
Now that we’ve considered what fir and pine are let’s examine the differences between the various types of lumber sold in the trade.
Characteristics Of Douglas-fir Lumber
Douglas-fir is a hard and heavy softwood, with a Janka hardness of 620, and is stiff and strong for its weight, with a modulus of rupture of 12,500 and a modulus of elasticity of 1,765,000. It has excellent dimensional stability. Its average dried weight is 32 pounds per cubic foot.
Characteristics Of Hem-Fir Lumber
Many species of fir have excellent stiffness-to-weight ratios. Grand fir, a representative species of the white fir group, has a Janka hardness of 490, a modulus of rupture of 8,740, and a modulus of elasticity of 1,530,000. Its average dried weight is 28 pounds per cubic foot.
Characteristics Of Southern Yellow Pine Lumber
The primary species in this group (Shortleaf, Longleaf, Slash, and Loblolly Pine) have hard, dense wood. Shortleaf Pine has an average dried weight of 35 pounds per cubic foot and a Janka hardness of 690.
Characteristics Of White Pine Lumber
As a representative of this group, Sugar Pine has an average dried weight of 25 pounds per cubic foot and a Janka hardness of 380.
