What is the purpose of a bond beam?
Some of the loads that lintels may be responsible for upholding include:
- Uniform loads, where weight is evenly distributed across the span.
- Triangular loads, where the middle of the span sees the most weight.
- Concentrated loads, where heavier sections may be in place among lightweight sections.
What are the best swimming pool lights?
What Types of Swimming Pool Lights are Available?
- LED pool lights. If you’re looking for an unbeatable combination of energy-efficiency and longevity, you can’t go wrong with LED lighting.
- Halogen pool lights. If you’re looking for the brightest bang for your pool lighting buck, halogen pool lights might be just what you need.
- Fiberoptic pool lights. ...
- Solar pool lights. ...
What is the 'beam' on a swimming pool?
Several items to consider, this from a build in the San Francisco Bay Area:
- Automatic pool cover: $11,000
- Solar panels: $10,000, although most system are far less than this. We used SunEarth panels so that the pool can be warm for my daughter's birthday party in February. ...
- Gas line extension from meter to pool heater: $8,000
- New gas line from street to meter: $12,000. ...
How do you fiberglass an existing swimming pool?
- The total process usually takes anywhere from three to six weeks for a typical project.
- The type of material used under and around the outside of the pool is critical. ...
- Setting and leveling the pool correctly is imperative if you want your pool to look great and last a long time.
- How the pool and patio tie together is extremely important. ...
How do I fix the bond beam on my pool?
0:255:43Leak Detection and Complete Bond Beam Repair on a Pool/Spa Combo ...YouTubeStart of suggested clipEnd of suggested clipSo we're gonna show you how we do a proper beam repair how we take it from the crack up remove theMoreSo we're gonna show you how we do a proper beam repair how we take it from the crack up remove the coping remove the tile. Break. It down to good solid gunite repair it and do what we have to do so.
What is a bond beam in a gunite pool?
A swimming pool bond beam is the top portion of the gunite, shotcrete, or concrete in which the pool coping sits and waterline tile is placed. The pools bond beams, when installed properly, ties horizontal steel with the vertical steel which runs down the walls to the floor.
What is a raised bond beam swimming pool?
A raised bond beam, or RBB, is a wall on your pool that extends above the surface of the water. It usually ranges from 6 inches to 3 feet in height. Not only does it add depth and dimension to your pool and yard, but it also supports the pools integrity with reinforced rebar.
How thick should a pool bond beam be?
about 12 inches wideBond Beam / Raised Bond Beam Typically, it's about 12 inches wide and reinforced with extra steel rebar, because the top sections of a pool require extra support.
Does my pool need a bond beam?
Every pool that sells obviously has to have a bond beam. A standard beam is suitable for one paver to go all the way round and that maintains the structural integrity of the pool.
How does bond beam work?
Bond beams are a horizontal feature embedded in a wall to add support to the structure. The bond beam is made up of specialized blocks that are filled with grout to hold a sturdy steel bar in place. They add steel reinforcement to structures that might need more than just traditional CMUs to hold it up sufficiently.
Should you install concrete under pavers around a pool?
A concrete deck is your best choice for a smooth surface that will maintain its original character far longer than pavers ever will, especially around in-ground swimming pools. Just ask your pool store or pool builder: Concrete slabs can bridge minor ground movements underneath the deck much better than pavers.
How do you bond pool rebar?
0:514:54Equipotential Bonding For Swimming Pools - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's a bonding clamps honey you should have a bonding clamp on each side then that bonding clampMoreThere's a bonding clamps honey you should have a bonding clamp on each side then that bonding clamp is tying. The number eight ground wire bare to the rebar that's inside of the pool.
What comes after pool rebar?
Deck Layout and deck pour Forming will be required for the deck stage. Rebar is once again, added for extra strength, it is actually dowelled into the gunite shell at points around the pool perimeter. Depending on your choice of decking (plain, exposed aggregate, pavers or stamped, sundek, stone, travertine etc.)
What is pool concrete called?
The “shell” of your swimming pool can be made of almost any durable material, but two particularly popular choices stand out: gunite and shotcrete. Both are forms of concrete, but their formation and consequently expected lifespan differ enough to give any homeowner pause.
How long does pool coping take to dry?
about 28 daysAfter the concrete is sprayed on, it needs time to reach its full potential. It doesn't dry, per se. It hardens and strengthens in a long process called curing. For a pool shell, this takes about 28 days.
Does a fiberglass pool need a concrete collar?
All inground fiberglass pools require some concrete to be poured around their perimeter to stabilize the pool shell. With the advanced techniques in The River Pools Way, this concrete bond beam is poured extra thick and flows under the lip of the fiberglass pool shell and encases the Rhino-Rod.
What is a pool bond beam?
A swimming pool bond beam is the top portion of the gunite, shotcrete, or concrete in which the pool coping sits and waterline tile is placed. The pools bond beams, when installed properly, ties horizontal steel with the vertical steel which runs down the walls to the floor.
Why are beam breaks horizontal?
Many other contributing factors for beam breaks are from deck pressure, tree roots and water penetration.
What is a cold joint in a pool?
This forms a joint between the gunite and mortar mix, called a cold joint. (A section of a concrete structure where 2 different materials meet).
Is the bond beam thicker than the pool wall?
Technically, the bond beam should be thicker than the pool wall and have more re-bar than the rest of the pool, which in turn, should be the strongest portion of the pool. The problem is–this is hardly ever the case. During the construction process of the pool (specifically when a pool is shot), the elevations (coping height or deck height) ...
Can you re-form a pool wall with concrete?
After all of the rebar is set in place and the gunite is clean, free of debris and coated with a bonding agent, the pool wall can be re-formed with fibre board and poured with concrete (for beams over 2.5 inches in height or mortar mix under 2.5 inches).
Why do you need a bond beam in a pool?
Its purpose is to provide added strength to the pool wall. The upper portion of the pool is exposed to many elements, such as expansion and contraction from heat, therefore extra support is beneficial and needed. The bond beam can also add surface area to the top of the pool, which increases the strength of the coping and provides additional area ...
What is bond beam?
What is a Bond Beam? The bond beam is a vital component of the pool structure, set during construction. It is a horizontal concrete element, usually reinforced with a larger diameter steel rebar, beneath the pool’s coping. Its purpose is to provide added strength to the pool wall.
Is a pool with a bond beam stronger than a pool without a bond beam?
Pools with a bond beam are stronger than pools without one. There are instances where issues can arise due to a weak bond beam. Cracks can occur and often it will be visible from tiles falling off the coping. Repairing a broken bond beam is an extensive process as the coping and tile have to be removed. Therefore, it is important ...
Do all pools have a bond beam?
Not all pools utilize the bond beam; however it is a smart choice when building your Houston pool. Since bond beams provide extra support, it helps to extend the life of your pool. This includes maintaining the integrity of the attached coping and preventing wall cracks. Pools with a bond beam are stronger than pools without one.
Why use a raised bond beam?
A major benefit of a raised bond beam is that it enables pool owners to construct their pools on a complex landscape. For example, if your pool area is hilly,this would be a good feature to support and balance your pool. What this feature does is that it protects the pool structure from external forces like soil.
What to look for when building a raised bond beam?
When constructing a raised bond beam, make sure you look for a reputable pool contractor. These architectural features require expertise and professionalism during construction. Otherwise, it won’t serve its main function. Even though you spend thousands of dollars creating this, it offers value for money.
What is the top coat of a pool made of?
This way, they enhance the appealing nature of the pool. The top coat is often made from quartz or tile material. Typically, you can customize it to fit all your requirements.
What is a RBB in a pool?
What is raised bond beam (RBB)? A raised bond beam, or RBB, is a wall on your pool that extends above the surface of the water. It usually ranges from 6 inches to 3 feet in height. Not only does it add depth and dimension to your pool and yard, but it also supports the pools integrity with reinforced rebar.
How to contact infinite pool?
The creativity and beauty is endless when including a raised bond beam in your pool. To learn more about RBB, contact Infinite Pools online or call 951-354-9888. We have the experience and knowledge to help you create and build the pool and yard of your dreams. Infinite Pools practices a hands-on approach to every job and is fully involved ...
Can a RBB be built on a slope?
While a RBB can be built on level land, one of the great benefits of RBB is that it allows pools to be built in areas of a property that would otherwise be unworkable, such as on a slope. The RBB serves as a kind of retaining wall to keep back the soil.
Can a RBB be raised?
The RBB raised wall can be covered with stone or quartz or tiles that really will give your yard beauty and depth. It can also accommodate a waterfall or light fixtures and can even allow your spa to be elevated so that the warm water flows down to your pool. The options of incorporating an RBB are only limited by the imagination of the owner and the pool designer.
What is the bond beam in a pool?
The pool bond beam is subject to many forces acting on it, and for this reason it is usually poured to be thicker and stronger than the lower section of the pool wall.
What is beam damage in a pool?
Beam damage could be defined simply as a crack that runs through the top of the pool wall. It may not be visible, until at an advanced stage, where cracking and crumbling of the tile is noticed. Long, horizontal cracks in the pool tile are many times the end result of years of expansion and contraction of the concrete in a pool.
How much room does a pool deck need to expand?
Oftentimes, all that is needed is to chip off the back of the pool wall so that the expansion joint between the pool deck and pool coping is true, straight through to the earth, with about ½” of room for expansion.
What is coping in gunite pool?
On In-ground gunite pools, the coping is the capstone for the beam, and is used to finish the pools edge and bring it up flush with the pool deck. Pre-cast concrete coping with a bull-nose front edge has been the standard for many years. Modern designs are making use of bull-nose brick coping in many colors and textures. Flagstone is also a popular choice.
