what is a 4 pin berg connector used for

Full Answer

What is a 4-pin Berg connector?

The 4-pin Berg connector is commonly known as the floppy power connector, as it was used for connecting the 3.5-inch floppy disk drive to the power supply unit.

What is a Berg connector?

Berg connectors are manufactured by Berg Electronics Corporation of St. Louis, Missouri, now part of Amphenol . Berg connectors have a 2.54 mm (0.100 in) pitch, pins are 0.64 mm (0.025 in) square, and usually come as single or double row connectors. Many types of Berg connectors exist. Some of the more familiar ones used in IBM PC compatibles are:

What is the difference between Molex and Berg connectors?

After the company ownership was transferred, the Berg connector also became known as the P7 connector or Mini-Molex connector. Berg connectors are smaller in size than Molex connectors. In Berg connectors, the pins are square and come in double or single row connectors.

What is the pitch of the Berg connector on the motherboard?

This connector has a 2.50 mm (0.098 in) pitch (not 2.54 mm). the two-pin Berg connectors used to connect the front panel lights, turbo switch, and reset button to the motherboard. the two-pin Berg connectors used as jumpers for motherboard configuration.

What are 4 pin connectors for?

The P4 connector is a 12V power supply cable used with motherboards that have an Intel Pentium 4 or later processor. Today, the connector is a standard power connector and is used with both Intel and AMD motherboards.

What is a 4 pin floppy connector used for?

the four-pin polarized Berg connectors used to connect 3½-inch floppy disk drive units to the power supply unit, usually referred to as simply a "floppy power connector", but often also referred to as LP4.

Where do I connect Berg connector?

Plug the four-pin Berg power connector into the FDD. Connect the three-pin fan power connector into the appropriate fan header on the motherboard according to the motherboard manual. Plug the additional cables from the case into the appropriate connectors according to the motherboard manual.

What is Burg power connector?

A Berg connector is a device used to join electrical circuits in computers. The best known Berg connector is used to connect the floppy drive to the power supply unit. This type of computer hardware can also be used to connect the front panel lights, the turbo switch, or the reset button to the motherboard.

What is a Berg connector used for?

A Berg connector is a connector used in computers to connect electrical circuits. It was manufactured by Berg Electronics Corporation before being acquired as a division of Framatome Connectors International. Berg connectors were widely used in the late 80s and early 90s, especially in computer power supplies.

What is the 4 pin ATX power connector for on a motherboard?

As the motherboard specification says, it's a 4-pin ATX 12V power connection. Pretty much every modern motherboard has a separate 12V power connector that's either a 4-pin or an 8-pin. The primary purpose of this power connector is to power the VRM that supplies power to the CPU.

Which connector is used for video card?

The PCI-E x16 slot is located on the motherboard and is the common interface for all graphics cards. The motherboard gets it's power from the 24 pin (or 20 pin) power connector from the power supply unit.

Which two pin connectors are the most common for connecting a power supply to a motherboard?

These supplies feature two main power connectors (P8 and P9), each with 6 pins that attach the power supply to the motherboard. All standard PC power supplies that use the P8 and P9 connectors have them installed end to end so that the two black wires (ground connections) on both power cables are next to each other.

Where does the floppy connector go?

Today, if any floppy drive is in the computer it would connects to "Drive A:" and the end cable connected to the motherboard. The floppy channel, FDD header, or floppy connection is where the floppy drive connects to the computer motherboard.

What is PCIe connector?

Peripheral Component Interconnect Express (PCIe®) is the most common standard for high speed interface that connects various server and storage components with the motherboard.

How many pins does the power connector?

6-Pin Connector This connector can supply the GPU with an additional 75 watts of energy. This means the graphics card will use the PCI Express x16 slot and also draw power directly from the PSU (Power Supply Unit).

What is a Molex connector used for?

Certain Molex connectors are used for providing power to the motherboard, fans, floppy disk drive, CD/DVD drive, video card, some older hard drive models, and more. Compatible connectors are available from many manufacturers, not just Molex and AMP.

What is a Berg connector?

What Does Berg Connector Mean? A Berg connector is a connector used in computers to connect electrical circuits. It was manufactured by Berg Electronics Corporation before being acquired as a division of Framatome Connectors International.

What is the difference between Molex and Berg connectors?

Berg connectors are smaller in size than Molex connectors. In Berg connectors, the pins are square and come in double or single row connectors. There are different types of Berg connectors, with the 4-pin and 2-pin being the most familiar.

Summary

Floppy drive power connector

The power connector on the 3½-inch floppy drive, informally known as "the Berg connector", is 2.50 mm pitch (distance from center to center of pins).
The power cable from the ATX power supply consists of 20 AWG wire to a 4-pin female connector. The plastic connector housing is TE Connectivity / AMP 171822-4 with female metal contact pins are choice of TE Connectivity / AMP 170204-* or 170262-*, where * is 1 or 2 or 4.

Overview

Company history

See also