Putting too much bleach in your drinking water can destroy the good bacteria in your well and ruin your pipes. When adding bleach to your well, make sure you mix it with water first. You want to dilute the concentration of the bleach to reduce the chance of it corroding the pipes.
Can you use too much bleach in a wash load?
Make sure you don't use too much bleach in your washing machine, on white clothes, and in your laundry. I would like to ask if you can use too much bleach in a wash load? Let me explain: My husband is a chef. His chef coats are 100% cotton.
How to sanitize a well with bleach?
When you need to destroy germs, pour bleach and let it sanitize. This process is known as shock chlorination. It is the technique of disinfecting domestic systems such as wells with household liquid bleach or chlorine. It is now the most widely used method for treating bacterial contamination in any supply.
Is it OK to soak in Clorox bleach?
Soaking is OK but normally, I recommend 1/4 cup Clorox ® Regular-Bleach₂ with CLOROMAX® /per gallon of cool water and only 5–10 minutes of soaking. It should always be diluted because it is so strong and concentrated.
How much bleach do you put in a gallon of water?
Your “up to 3 cups” of liquid bleach with hot water is very concentrated, even with the other products. Soaking is OK but normally, I recommend 1/4 cup Clorox ® Regular-Bleach₂ with CLOROMAX® /per gallon of cool water and only 5–10 minutes of soaking.
Can you use too much bleach to shock a well?
Do not use excessive amounts of bleach - more is not more effective. 5) For best results the bleach should be combined with water before adding it to the well. [By reducing the concentration there is less chance of corrosion of the cables and pipes in the well.
How long does it take to run bleach out of a well?
Monitor the process, it can take 30 minutes to 24 hours or more to flush all of the bleach solution from the well. Use chlorine test papers to verify that the water coming from the outside faucet or yard hydrant is clear of any bleach solution. Flush the chlorinated water from water heaters.
How much bleach does it take to shock a well?
CALCULATE AND POUR: Pour 3 pints of chlorine bleach per 100 gallons of water plus an additional 3 pints into your well as described above. MIX: Attach a clean garden hose to the outdoor faucet nearest the well and place the end of the hose inside the well.17-Dec-2012
How long does it take for water to clear after shocking a well?
It will usually take 4 to 8 hours to flush the well after a standard well chlorination. The water may become discolored during flushing because the chlorine may have loosened the hard water deposits in the plumbing. Caution: The chlorine must be completely flushed from plumbing system.11-Mar-2021
How long after bleaching well can I shower?
Do not shower for at least 24 hours after shocking your well. Waiting for one or two days more, if possible, is much better. Chlorine levels in the well water will go down only after freshwater dilutes and replaces chlorinated water. This process can take 1-2 days.
Why does my well water turn brown when I add bleach?
The brown is the iron in the water that has oxidized as a result of the chlorination. Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown.12-Oct-2007
Should you shock your well?
Shock chlorination is a method of disinfecting a water well. It is recommended when a water system is contaminated with bacteria. Contamination can occur when the well is installed, when repairs are made to the pump or plumbing, or when rainfall runoff enters the well.
Can I put Clorox bleach in my well?
You can disinfect your well with household chlorine bleach such as Clorox, Purex or a generic brand. The chlorine in the bleach kills bacteria. Note that it may take more than one chlorination for your well to return a satisfactory test. ... To disinfect your well follow this procedure.
When should I shock my well?
When should I shock chlorinate my well? Wells should be shock chlorinated when a well water sample result shows that there is bacteria in the water. Any time a well is opened for repair it must be disinfected. Newly-built wells should also be shock chlorinated following construction.24-Feb-2016
Can you put too much chlorine in a well?
Not much happens at all. You just need to run a bit more water through your system to eliminate any trace of taste or smell. You have a teeny bottle of bleach, Your well has hundreds or thousands of litres of water in it. The result is very dilute!
Should you pour bleach in a well?
Bleach should not be put into the well straight from the bottle. The general recommendation is to dilute the laundry bleach 1:100, (one gallon of bleach to 100 gallons or water; half a gallon of bleach to 50 gallons of water; a quart of bleach to 25 gallons of water.)
How often should you chlorinate a well?
every 3 to 5 yearsHomeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria. If these tests turn up positive for bacteria, chlorinating the well may be a way to resolve the problem.
How long does it take to clean a well with bleach?
Mix the bleach with the well water. Then place the hose in the hole where you poured the bleach, allow the water to run back into the well for 15-20 minutes.
How long should you wait to use water after chlorinating a well?
Let the chlorinated water stand in the plumbing system for 12 to 24 hours. Do not run any water or flush toilets during this time. Use your reserves of fresh water for all purposes.
How to get rid of chlorine smell in well water?
Mix 2 quarts bleach in 10 gallons of water; pour into well. Connect a garden hose to a nearby faucet and wash down the inside of the well. Open each faucet and let the water run until a strong chlorine odor is detected, then turn it off and go to the next one. Don't forget outdoor faucets and hydrants.
What is the water content of bleach?
First of all, you should calm down. Household bleach is typically 91% water, 9% sodium hypochlorite ( N a O C l .) Household ammonia is typically 70% water, 30% ammonium hydroxide ( N H 4 O H .) You are mixing fairly dilute solutions of the two chemicals.
What is the active ingredient in bleach?
The active ingredient in bleach is sodium hypochlorite N a O C l which is a powerful oxidising agent. Powerful enough to break the chemical bonds in the dyes of our clothing (hence its 'bleaching' capabilities) and powerful enough to extensively corrode human tissue.
How to kill algae in a well?
Periodically pouring a gallon of bleach into a person’s well to kill algae and bacteria is the recommended and sensible thing to do. It’ll evaporate out rather quickly.
Why does chlorine pool in low laying spots?
Additionally, the vapor density of chlorine gas is higher than air, thereby causing it to pool in low laying spots , well away from your nose and mouth.
What happens when you swallow N A O C L?
When swallowed, N a O C l will dissociate into N a + and O C l −. The O C l − then reacts with water to form hypochlorous acid H O C l. This goes on to attack the membranes and proteins of your cells, causing cell death.
How to get toxic gas out of house?
Provided you didn’t let the reaction run for 20 minutes, there shouldn’t be too much toxic gasses to begin with. Flushing the reactants down the toilet will quickly get them out of your house.
Can you drain a well and let it refill?
If in doubt just drain the well and let it refill.
Shocked well, way too much bleach
We have a well that we don't know how deep it is, my guess is at least 300ft. I called a well company about shocking our well because it was running muddy constantly, even with our whole home filtration. They told us, 1 gallon of bleach mixed in 5 gallons of water, then dump it in the well.
Comments (3)
We used to have a well, but long story on that one. Anyway, I'm not an expert on wells, but depending on where your well water source is coming from will depend on when it will clear out.
How much water can a well hold?
Most Dug Wells are shallow and excavated in poorly permeable material; consequently, they are readily affected by drought or by seasonal declines in the water table and are easily contaminate the Groundwater. A standard 6-inch diameter drilled well can store 1.5 gallons of water per foot. If you know the depth of the well, the level of the water and pump depth, you can figure out the water storage capacity. Most people don’t know all of this information, but it can be figured out by consulting with a water system professional.
What is the best way to purify well water?
It should be dealt with. One of the easiest well water purification methods is to bleach it . If you determine your well needs to be treated because of any question of high levels of microbiological or chemical contaminants then your system should be shocked with chlorine to sanitize your well water.
How deep can a well be drilled?
Drilled wells that penetrate unconsolidated material require an installation of casing and a screen to prevent an inflow of sediment and collapse. They can be drilled more than 1,000 feet deep.
What was the shallow well lined with?
Dug Wells -Were hand shoveled until the digger hit the water table- The Shallow well was lined with brick or stone
Can a private well be contaminated?
Shocking you’re Well and monitoring what the quality of your well water is putting you in charge of your Private Well, which no one will do for you unless you take action. Owners need to be aware of the harmful contaminants that can enter you well and drinking water. Private well systems can be contaminated by naturally occurring or man-made activities.
Can a well fail in a rural area?
Shallow Wells that are perfectly fine and work for years can fail after only a few years supplying a home. At the very least when buying a rural home with an existing Well, find out about the quality of the water to see if it is contaminated or linked to other Wells in the vicinity that may or may not have some type of trouble. Have it tested by a Certified Laboratory recommended by the County or State.
Can you sanitize a well with bleach?
If you determine your well needs to be treated because of any question of high levels of microbiological or chemical contaminants then your system should be shocked with chlorine to sanitize your well water. You can do this yourself. Chlorinating a well with bleach can lower your results for iron and Coliform bacteria and also is an inexpensive efficient way to purify a well for a safe source of drinking water.
Question
I would like to ask if you can use too much bleach in a wash load? Let me explain:
Answer
A couple of concerns with your laundry approach. First, the amount of bleach and the second is the hard water. The yellowing may be from one or both.
Sign up for Clorox newsletter
Get cleaning tips, product updates, promotional offers and more to your inbox.
