The transit bolts normally lock the springs in a washing machine in place, these springs are designed to stop the washing machine from bouncing around when in use. If you leave these in and then your machine gets to a spin cycle it is likely to start bouncing around the room.
Should I refit the transit bolts on my washing machine?
If you ever need to move the machine, for example you move home and take the washing machine with you, then you should refit the transit bolts before you move to prevent any damage to the washing machine whilst it is transported.
What happens if you leave the transit bolts on?
But sometimes what happens when you leave the transit bolts on is the machine jumps around and knocks the belt off so just check the belt first. Let me know what you find or if you need anymore info. The belt is on and looking at the wiring it looks fine, intact and as it should be.
What happens if you don’t remove the bolts from a washing machine?
The bolts can rip sections off the outer tank, tear through the outer casing and cause massive damaging vibrations to be sent through the room in which the washing machine is installed. In other words, by not doing as instructed you risk major damage to your washing machine.
Why won't my Kenmore washer belt stay on?
If you forgot the take the bolts out then the belt might have come off. Try removeing the back panel and see if the belt has come off. And also make sure the wiring to the motor is ok and not come loose. But sometimes what happens when you leave the transit bolts on is the machine jumps around and knocks the belt off so just check the belt first.
Can leaving transit bolts damage washing machine?
The bolts can rip sections off the outer tank, tear through the outer casing and cause massive damaging vibrations to be sent through the room in which the washing machine is installed. In other words, by not doing as instructed you risk major damage to your washing machine.
What happens if you don't remove shipping bolts from washer?
Failure to remove the shipping bolts and retainers before use may cause severe vibration and noise, which can lead to permanent damage to the washer. The second possible cause of excessive vibration is a shipping block that might be caught under the washer.
Do you have to remove transit bolts from washing machine?
The transit bolts need to be removed when the appliance is being installed. They are designed to hold the drum in a fixed position while being transported. Failure to remove this will void the warranty, so please refer to the appliance manual for additional guidance.
What happens if you don't remove shipping bolts from LG washer?
You need to remove the shipping bolts. If the four shipping bolts of your machine are still attached to the back of the washer, they will cause a loud noise and vibration during the operation of the machine; which can lead to a permanent damage of the washer.
Why do you need to remove the bolts from washing machine?
0:241:53How to remove transit bolts from your washing machine | by HotpointYouTubeStart of suggested clipEnd of suggested clipIt's vital that you remove them before you use it using a washing machine with transit bolts stillMoreIt's vital that you remove them before you use it using a washing machine with transit bolts still installed may permanently damage your machine and may even invalidate your warranty.
Why do shipping bolts make washer shake?
1:194:52Shaky Washer? Remove Shipping Bolts - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt. This is the inside of your washing machine. Okay. Now if you look you see this spring. Okay yourMoreIt. This is the inside of your washing machine. Okay. Now if you look you see this spring. Okay your tub rides on this spring. And for for lack of a better way to explain it shock absorbers.
Is it necessary to remove transit bracket?
Before using the washing machine you must remove the transport bracket (see “Installation/Remove the transport bracket”). Do not forget to screw back 4 screws to the rear panel by which was fixed the transport bracket - to avoid noisy and vibration of the machine.
What do transport bolts do?
The most common example of transit bolts is the securing of the drum of a washing machine while it is transported from shop to property (or property to property). The drum of a washing machine is weighted and would damage the electronic internals if it were to swing into them while being transported.
Can you transport a brand new washing machine on its back?
When you move your washer, first replace the shipping bolts that were originally in the back of the washer. This keeps the drum from moving inside the washer and protects it from damage. Also, make sure your washer is placed in the moving van upright. Shipping your washer on its side, front, or back can damage it.
What happens if you turn a washer upside down?
It's recommended you always keep a washing machine in an upright position. Laying a washer on its side can cause the inner and outer tubs to bump against each other, which can loosen support pads or damage the suspension. It can also cause the tubs to move out of alignment and alter the way your unit works.
How do you remove shipping bolts from a washing machine?
0:562:14Front Load Washer Noisy - Shipping Bolt Removal - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd operation use a wrench or socket to loosen the shipping bolts and remove by pulling them outMoreAnd operation use a wrench or socket to loosen the shipping bolts and remove by pulling them out from the washer. Be sure to remove both the plastic spacer and the shipping.
How many shipping bolts does an LG washer have?
4 boltsNote: This product has to be paired with the 4011FR3159E 4.75 inch shipping bolt (x2) for a total of 4 bolts on most LG washers.
What happens if you don't remove the transit bolts?
If you do not remove the transit bolts correctly you risk damage to your washing machine, in some cases this can be considerable, to the point where you can comprehensively wreck your shiny new washing machine. The bolts can rip sections off the outer tank, tear through the outer casing and cause massive damaging vibrations to be sent through ...
What does failure to remove transit bolts mean?
Failure to remove the transit bolts correctly, apart from the potential for damage, will mean that any fault or damage caused by failure to do this will almost inevitably not be covered under the manufacturer's warranty as it is not a failure of the machine, but a failure of the user or installer to install the machine correctly.
Why do you need to put a transit bar on a washing machine?
Whenever you buy a new washing machine there are what is known as "transit bars" or "transit packaging" to stop the drum unit inside from moving about and banging off the insides of the outer cabinet. This packaging is essential to prevent damage to the washing machine whilst it is in transit ...
Can bolts damage a washing machine?
In other words, by not doing as instructed you risk major damage to your washing machine.
Do you refit transit bolts?
After you have removed the transit bolts hang onto them. If you ever need to move the machine, for example you move home and take the washing machine with you, then you should refit the transit bolts before you move to prevent any damage to the washing machine whilst it is transported.