Correspondingly, what happens if you leave transit bolts in washing machine? The bolts can rip sections off the outer tank, tear through the outer casing and cause massive damaging vibrations to be sent through the room in which the washing machine is installed.
Can I safely remove the transit bolts from my washing machine?
A great video from Indesit demonstrating exactly how to safely remove the transit bolts from appliances such as your washing machine or tumble dryer. The transit bolts are there to hold the drum in place during transport. When you get a new appliance, you must remove them before using it or it can damage the machine.
What happens if you leave the transit bolts on?
But sometimes what happens when you leave the transit bolts on is the machine jumps around and knocks the belt off so just check the belt first. Let me know what you find or if you need anymore info. The belt is on and looking at the wiring it looks fine, intact and as it should be.
Where are the transport bolts located on a washing machine?
They are located on the back of the machine. In the set for removing the transport bolts are attached: a wrench and plastic valves.
How do I remove the bolts from my washing machine?
These bolts must be removed before the washing machine is used. Ordinarily, unless there are any special instructions, the bolts will simply unscrew as normal and you can simply pull them out.
What happens if I dont remove transit bolts from washing machine?
The bolts can rip sections off the outer tank, tear through the outer casing and cause massive damaging vibrations to be sent through the room in which the washing machine is installed. In other words, by not doing as instructed you risk major damage to your washing machine.
What happens if you run a washer with shipping bolts?
Warning: Failure to remove the shipping bolts and retainers before use may cause severe vibration and noise, which can lead to permanent damage to the washer. The second possible cause of excessive vibration is a shipping block that might be caught under the washer.
Do you have to remove transit bolts from washing machine?
The transit bolts need to be removed when the appliance is being installed. They are designed to hold the drum in a fixed position while being transported. Failure to remove this will void the warranty, so please refer to the appliance manual for additional guidance.
Why do you need to remove the bolts from washing machine?
0:241:53How to remove transit bolts from your washing machine | by HotpointYouTubeStart of suggested clipEnd of suggested clipIt's vital that you remove them before you use it using a washing machine with transit bolts stillMoreIt's vital that you remove them before you use it using a washing machine with transit bolts still installed may permanently damage your machine and may even invalidate your warranty.
Why do shipping bolts make washer shake?
1:194:52Shaky Washer? Remove Shipping Bolts - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt. This is the inside of your washing machine. Okay. Now if you look you see this spring. Okay yourMoreIt. This is the inside of your washing machine. Okay. Now if you look you see this spring. Okay your tub rides on this spring. And for for lack of a better way to explain it shock absorbers.
Is it necessary to remove transit bracket?
Transit bolts are meant to prevent the washing drum for rotating, vibrating, moving while the machine is in transit or transport. These bolts must be removed once machine is installed and ready to be operated.
What happens if you forget the transport bolts?
If you forget about the transport bolts or decide that they do not interfere, you can face unpleasant consequences: the noise of the drum, the knocking inside the machine, the jumping of the washing machine, until the rollover.
How many bolts are needed for a washing machine?
Before transportation, if the washing machine is transported alone, or before installing the already purchased equipment, you need to look at the rear wall, where the bolts will vary from three to five in the case (depending on the model of the selected device). However, there are no rules without exceptions.
Why do we need transport bolts?
Transport costs often have to be incurred, and therefore knowledge of the need for transport bolts can always be useful. Transport bolts are elements intended for temporary fastening of parts in order to avoid damage to them during transportation. In our case, the transport bolts fix the drum of the washing machine.
How to remove the mounts on a candy machine?
To remove the mounts, you need to perform the following action algorithm. Remove the screws located on the cover in the corners. Then remove the cover by unscrewing the existing mounting bolts (two pieces) under it.
What is the role of a washer bolt?
The obligatory element that is present is the plastic cylinder. Its role is to fix the drum in the given position. When transporting, any thing is at risk of being broken.
What happens if you don't remove bolts?
According to the instruction, if you ignore the instructions and do not remove the bolts, and the machine because of them will be broken, then you can not count on satisfaction in compensation. Not having bolts will lead to noise, jolts, unnecessary vibrations and so on.
Why is it important to read the instructions on a washing machine?
Before using the equipment in any case, it is necessary to read the instructions carefully in order to avoid unpleasant consequences for the new washing machine. All instructions are made carefully and without haste, and in gratitude the washing machine will definitely serve reliably and for a long time.