What do RS and WS mean in knitting?
RS and WS signify the "right. As you work with knitting patterns, you'll get to know the most common abbreviations — for example, RS (right side) and WS (wrong side). Knitting- pattern instructions explain. When a pattern specifies a right front, it means the front that would be on your right side as you would wear it.
What does SSSSS mean in knitting?
SSS means second sock syndrome or second sleeve syndrome and refers to a knitter being not motivated enough to finish the final parts of their projects – often because it’s too boring to knit the exact same thing again. Stash describes your total knitting yarn reserves. Tink = ‘knit’ read the other way round. Refers to reverse knitting.
What do the symbols on the knitting pattern mean?
For the most part each symbol represents a stitch as it looks on the right side of the work. Alwaysrefer to the pattern key for additional symbol definitions. Symbols courtesy of the Craft Yarn Council.
What counts as a stitch in knitting?
In knitting, the slip knot always counts as a stitch. If you are a crocheter, be sure to remember this, as in crochet, the slip knot never counts as a stitch. Row 1 (RS): Knit. Row 2 (WS): Purl. This means that on Row 1, which is the right side of the piece (RS), you will knit all 12 stitches on the needle.
How do you determine Ws in knitting?
The right side of your knitting is the face of the fabric. This is the side that will be on the outside of a garment. The wrong side is the back side of the fabric, and will be on the inside of a garment. When the right side of the fabric is facing you, you're working on a right side row.
How do you tell the difference between RS and WS in knitting?
1:044:05Knitting Tip: RIGHT SIDE (RS) vs WRONG SIDE (WS) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if you're about to work a row. And you see that the v-shaped stitches are facing you then youMoreSo if you're about to work a row. And you see that the v-shaped stitches are facing you then you know you're about to do a right side row which in this case would just be knit stitches.
How do you tell right side from wrong side in knitting?
The easiest way to distinguish the sides is to look at a simple swatch in Stockinette Stitch. The flat side with all the V's on it is the "right" side. The bumpy purl side is the "wrong" side. If your pattern calls for Reverse Stockinette, it's the opposite.
How do you knit the first row on the wrong side?
2:443:57How to Knit: Right and Wrong Side - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat is the wrong side to begin with maybe it's a lace pattern. And you need a row of purl stitchesMoreThat is the wrong side to begin with maybe it's a lace pattern. And you need a row of purl stitches before you do the next row. Because. It's just not possible to knit into that row of on.
Which is Ws on garter stitch?
THE FIRST WAVELET MADE ON THE FIRST ROW directly above the cast-on. That's it. There is no difficulty, no big secret. You just need to remember what a knit or a purl stitch looks like and which stitch you are working.
What does ending with a WS row mean in knitting?
When your pattern tells you to end on a wrong side row it means that the last row you knit is the one on the wrong side (hidden side) of your project. So if you are knitting in stocking stitch (stockinette) the last row you work is a purl row so that you are ready to knit the next row.
Is cast on row right side?
When you cast on stitches with the cable cast on method, the stitches are on the left needle at the completion of the cast on. The right side of the cast on is facing you, and you don't have to turn the needle around to start the first row.
What does knitting on the wrong side mean?
The wrong side of knitting refers to the side that will be on the inside of a garment. The right side is the side the side seen when the garment is worn. The pattern row does determine the "wrong side", and as a general rule is usually an even row.
Does long tail cast on count as a row?
Because of the fact that the long tail cast on is really a variation of a backwards loop cast on with the first row already worked, it often counts as both the cast on and the first (right side) row. However, when this is not practical for the project at hand and the cast is not counted as the first row.
Is thumb cast on same as long tail?
Yes! The result from the Thumb Method is identical to the Long-Tail Cast On. This technique uses your left thumb to more easily wrap your yarn than the traditional Slingshot hold.
Does cast off count as a row?
The cast on doesn't count as a row. But it's easier to count all the rows in the worked fabric, below the needle, and just not count the loops on the needle. Some may disagree with me. It doesn't matter, as long as you are consistent within your own work.
What is a reversible pattern that develops a wrong side when knitting stripes?
Even the most simple way of knitting with two-colors, meaning stripes, will have one side with a very distinct transition and one where the stitches in the different colors interlock. Garter stitch is a very good example of a reversible pattern that develops a wrong side when you are knitting stripes.
What does it mean when you knit on the wrong side?
In knitting, the wrong side refers to the side of a project that won’t be visible to the naked eye when finished. Typically because this side of the fabric shows characteristics not in line with the intended look or fit.
What is stockinette stitch?
Rront and back of the same swatch in stockinette stitch. Stocking stitch is one of the most popular knitting stitch patterns. It has a very smooth side and a side that shows little wavey horizontal ridges.
What is the wrong side of Intarsia knitting?
The wrong side of intarsia knitting will always have visible joins at the borders of two-color blocks. A little test swatch knit with the Fair Isle technique. And Fair Isle is even easier to identify because you are knitting with two strands at the same time and this creates floats on the backside.
What is the right side of a knitting pattern called?
Often, this is referred to as “reverse stockinette stitch”.
Is the moss stitch reversible?
Luckily, a great many knitting stitch patterns are reversible: The moss stitch comes to mind, or the rib stitch. If you turn these around, you will see the exact same design. However, there is one asymmetrical thing remaining: Your cast-on the tail. Normally, you start knitting on the right side.
Is knitting reversible?
You see, most knitting stitches and patterns are not reversible. There is a good side and a side that often looks quite plain or even a bit wonky. And this good side, where the pattern looks at its best is called the right side, while the back is referred to as the wrong side.
Why Use Abbreviations?
Abbreviations are often used to make patterns shorter and easier to read.
Common Knitting Abbreviations
These are some of the most common abbreviations you are likely to find in knitting patterns. There are others, but in most cases where others are used, there will be a key or an explanation somewhere in the pattern as to exactly what the designer wants you to do.
What is knitting in rows?
With the abbreviations and terms at hand, let’s look at a typical knitting pattern. Knitted items can be worked back and forth in rows to form a flat piece, or in rounds to form a tube with no seams, such as socks or hats . Special needles are used to work in rounds.
What is the stitch called when you knit every row?
You have created what is called garter stitch, made by knitting every row on a flat piece. This is a reversible pattern, as there is very little difference between the right side and the wrong side. When a pattern tells you to work in garter st, it means to knit every row. Return to top.
What is the last row of a knit stitch called?
Since the pattern says to end with a wrong-side row, that means that the last row you work should be a purl (WS) row. When you repeat a knit row and then a purl row for a number of rows, your are creating a pattern called stockinette stitch. This is abbreviated St st.
What is row 2 in knitting?
Row 2 (WS): Purl. This means that on Row 1, which is the right side of the piece (RS), you will knit all 12 stitches on the needle. Then for Row 2, the wrong side (WS) of the piece, you will purl every stitch. The pattern may now say: Rep Rows 1 and 2 until piece measures 4” from the beginning, ending with a WS row.
What does "maintain pattern as established" mean?
Maintain pattern as established. This is usually used when you are working a pattern stitch and are increasing (or decreasing) at the edges. It means that you keep the center part in the pattern as you have already set it up, and will add (or subtract) stitches at each end without disturbing that pattern.
How many stitches does a slip knot count as?
That means that you will first make a slip knot on one needle, then cast on 11 more stitches on the same needle. In knitting, the slip knot always counts as a stitch. If you are a crocheter, be sure to remember this, as in crochet, the slip knot never counts as a stitch. Row 1 (RS): Knit. Row 2 (WS): Purl.
What does the asterisk mean in knitting?
Rather than writing out these steps time after time, asterisks (*) are used to indicate the repeats . You will find asterisks used in many different patterns, such as ribbing.
What is written knitting?
Written knitting instructions explain the details of the pattern and instruct you how to knit each stitch. They give you row-by-row instructions. Most knitting patterns will come in a written format. You’ll find this to be helpful as you become more acquainted with learning to knit.
Where does a knitting stitch start?
The pattern begins at the left hand side with the instructions moving from left to right. The pattern works itself from top to bottom on the page but creates a fabric from the bottom up. In a knitting stitch pattern, a specific series of stitches occurs and repeats horizontally across a row.
How many stitches are in a 2x2 rib knit pattern?
A 2 x 2 rib knit pattern has a 4-stitch repeat – knit 2 stitches, purl 2 stitches or K2, P2 – and a 1 row repeat. It would be written like this:
What does "knit 1 purl 1" mean?
For example: (knit 1, purl 1, knit 1) into next stitch. This means you would knit one, purl one, knit one all in the same stitch before moving on to the next step. But that’s just one example. You should know that the use of parentheses and other symbols may vary by designer and region.
Do knitting stitches have repeats?
As discussed earlier, knitting stitch patterns usually have a series of repeats in each row. To keep from having to write out the repeated steps each time, asterisks (*) are used to mark the repeats. Sounds logical, right? We’ll provide examples of this in the stitch patterns below.
Do you need to cast on extra stitches to repeat a pattern?
Sometimes, though, in order to complete a repeating pattern, you’ll need to cast on extra stitches past the multiple required. This occurs only in flat knitting, when knitting on straight knitting needles. The following knit and purl stitch pattern will explain this in further detail.
