by Buck Weber
Published 3 years ago
Updated 3 years ago
Power failure
What does PF stand for on an oven?
The "PF" indicates a power failure. This would be normal to happen when the circuit breaker was flipped OFF and back ON. The "Clock" must be set before all the other functions will be available. You will need to press "Clock" and set the clock and your oven should operate normally.Mar 25, 2012
How do I fix the PF on my Whirlpool oven?
Appliance Tech - Moderator
First shut off power to oven, if you have a plug, unplug it if yo have it hard wired turn off circuit breaker. Wait several min and turn power back on. See if the oven "resets" itself. Check for "PF".Sep 22, 2007
What does PF mean on gas stove?
The PF message in the display usually indicates a power failure. Try resetting the control by disconnecting power for 30-60 seconds or press stop/cancel.Dec 18, 2010
Why is my stove flashing PF?
PF indicates a power failure. After a power failure you will need to reset the clock before the controls will work again.Feb 18, 2009
Why does my Whirlpool stove say PF?
PF - Power Failure - PF error code indicates a power failure during the dryer's cycle. Press and HOLD start to continue the cycle, or press off/pause to clear display.
What does PF mean on a double oven?
The PF normally indicates a power failure on most ovens. The code normally needs to be cleared using the CLEAR/OFF button and then the clock would need to be reset. If this does not clear the PF then it is likely that you have an electronic control board failure.Oct 30, 2009
Why is my Whirlpool oven not heating up?
A Whirlpool oven not heating evenly can also be due to a defective temperature sensor. This component works with the control panel to regulate an oven's temperature fluctuations. If the temperature sensor is malfunctioning, it won't accurately communicate these fluctuations, resulting in uneven cooking.
How do you reset a Whirlpool stove?
Reset power to the product:
Power unit down by turning off the circuit breaker(s) for one (1) minute.
Power unit up by turning on the circuit breaker(s).
Start a bake cycle.
Monitor the oven for one (1) minute to ensure the error code does not display again.
Verify oven operation.
How do I get the lock off my Kenmore oven?
Clear the lock mechanism -- as indicated by the DOOR LOC light -- by pressing and holding in the oven door light switch for 20 to 30 seconds. While the switch is depressed, the latch motor will gradually withdraw the lock, allowing you to open your oven door.
What does PF mean on Kenmore oven?
Power failure
Common solutions for: Kenmore PF - Power failure (not a failure mode) Not a fault - Indication that power was lost to range. The manufacturer has assigned this error or fault code to indicate that the appliance lost power temporarily. Press CANCEL to clear the display.
What does PF mean on my LG oven?
power failure
The PF display code is not actually an error code, but an indication that the unit has experienced a power failure.Jul 15, 2020
How do I fix PF on my LG stove?
When your cooktop elements display shows a PF message and your main dysplasia is a flashing clock, press any cooktop element ON/OFF key.Then press the Clear Off key on the oven controls to stop the flashing. If the time needs to be reset, press the Clock key and reset the time.Oct 22, 2021
What does F5 mean on Whirlpool oven?
While you're using the oven on a Whirlpool stove or range, an "F5" error code may appear on the user information screen. In such a case, the oven will stop operating. The error code may indicate a repair is required for the oven, and this may require replacement parts. What does the code f3 mean on a Whirlpool oven?
What does F1E2 mean on a stove?
Also Know, what does f1e2 mean on a stove? The F1 E2 error code indicates an oven control failure. Try disconnecting power to the range for 20-30 minutes, then restore the power. If this does not help, I suspect that the oven control will need to be replaced.
Where is the oven probe located?
Yes it is located inside the oven. It is a long metal probe mounted to the back wall. Sometimes you can remove the two 1/4 screws and pull it inside then disconnect it. Otherwise you would have to pull the unit out remove the back panel to access.
