Sink Base Width and Kitchen Sink Width in Inches and CM.
| Base cabinet Width in Inches and CM | Kitchen Sink Width Inches and CM |
| 18 inches 45 cm | 15 inches 38 cm |
| 24 inches 60 cm | 21 inches 53 cm |
| 30 inches 76 cm | 27 inches 68 cm |
| 33 inches 84 cm | 30 inches 76 cm |
What is the standard size of a sink cabinet?
Standard sink base cabinets are 24″ deep (back to front), and most sinks are designed to fit that size. However, widths vary widely and sink widths vary accordingly. All you need is the cabinet in question and a tape measure!
What size sink fits a 33 inch base cabinet?
This normal size (30 inches wide) can comfortably fit in at least a 33-inch base cabinet. If you have a larger kitchen area that can smoothly accommodate a larger sink, the average size of a large sink measures 33 inches or 36 inches in width, which is often available in the single or double bowl shape.
What are the standard dimensions of a kitchen sink?
- Start by measuring the depth of your cabinet. ...
- Next, measure the total width. ...
- Now that you have a total number, subtract approximately 4-inches from the overall width and 1-inch from the depth to get your sink width.
- If you have a drop-in sink, be sure to measure the interior width of the sink top at the widest spot and then subtract the same 4-inches.
What are the dimensions of a sink base cabinet?
Standard Base Cabinet Sizes
- Height: Typically, standard base cabinets measure 34 1/2" H and 36" H from the floor to the top of the countertop when a countertop is installed. ...
- Width: The width of a standard base cabinet will come in multiples of threes between 9 inches and 42 inches. ...
- Depth: The depth of base cabinets without a countertop is 24 inches. ...
How do you determine minimum cabinet size?
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.
Why does cabinet size matter for sinks?
WIDTH (Side to Side Measurement): how much cabinet and counter space do you need (or have)? The width of your sink not only determines how functional your sink is (can you fit in your favorite roasting pan?) and how much counter space you have, but also whether or not it will fit in your existing cabinet.
How do you measure a sink for a cabinet?
0:031:05How to Determine the Right Size of your Undermont Sink - YouTubeYouTubeStart of suggested clipEnd of suggested clipHalf an inch from the internal cabinet size dimension a and you will determine the maximum externalMoreHalf an inch from the internal cabinet size dimension a and you will determine the maximum external sink size B. Let's see an example let's. Say you measure the interior width of your base cabinet.
What is the minimum size sink?
Experts recommend at least 22 to 27-inches in length, which also works for small kitchens. Length is one factor, but you also have to consider the depth of the sink. Kitchen sinks should be at least 7 to 7.25 inches deep; anything less and your dishes will quickly pile up and reach the faucet.Oct 15, 2020
What is the standard sink size?
The most common sizes for a kitchen sink are 30" or 33", however a standard size could measure anywhere between 24" and 36" in length.
What is the standard size for a kitchen sink cabinet?
A 30-inch wide or a 36-inch wide cabinet are most common. The height of the cabinet can be customized, but 36 inches is average. A typical 33-by-22-inch sink will fill a 36-inch base cabinet. If you're replacing a sink, make sure it fits the existing cutout.
How do you determine sink size?
To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.
What size sink goes in a 33 inch base cabinet?
33-by-22-inch sinkA base cabinet can be filled with a 33-by-22-inch sink.
What are standard cabinet sizes?
Standard kitchen cabinet heights include 12, 15, 18, 30, 36 and 42 inches tall; depth ranges from 12 to 18 inches. Typically installed 18 inches above countertops, 54 inches above floor and 24 inches above stove.
What is the difference between a base cabinet and a sink base cabinet?
A sink base cabinet has been specially crafted to use with a sink. The cabinet does not have a back panel, which allows plenty of room for access to the plumbing. Sink base cabinets also do not have drawers, which interfere with the water lines, waste traps and any other pipes that are under the sink.
Can you put a 30 inch sink in a 36 inch cabinet?
Typically, a 36" sink base has 34 1/2" of interior space. So a 33" sink or smaller should work with out having to notch the cabinet.
What is minimum base cabinet width?
Base Cabinet Height, Depth, and WidthHeight, without countertop34 1/2 inchesHeight, with countertop35 to 36 inchesDepth (front to wall), without countertop24 inchesDepth, with countertop25 to 26 inchesStandard widths12, 18, 24, 30, 33, 36, 48 inchesSep 28, 2021
Sink Base Cabinets Explained
We need to start by looking at the sizes of base cabinets. The cabinets need to be extra firm to ensure they form the base of the countertops. A base cabinet can have double doors, doors, a combination of some drawers, a single door, or a series of some drawers.
Sink Base Cabinet Size Chart
Homeowners need to understand the diverse sink base cabinet sizes especially when fitting or refacing their old base cabinets. Below are size charts with the recommended standard height, width, and depth of the sink base cabinets.
Sink Base Width and Kitchen Sink Width in Inches and CM
The size chart below shows the sink base cabinet height in inches and cm and the sink base cabinet depth in inches and cm. Have a look.
How to Measure Kitchen Cabinets
A homeowner may decide to conduct kitchen renovation just in case the base kitchen cabinets are dilapidated or the lifespan which is about 10 to 15 years has expired. A cabinetmaker will measure the current cabinet dimensions to get the correct cabinet sizes by taking the exterior dimensions.
What to Consider When Choosing Sink Base Cabinet Size and Dimensions
Apart from the use of the sink base cabinet size chart we have above, there are other aspects that will condition the dimensions and measurements of your common base cabinet. Here are a few aspects which will influence the sink base cabinet’s size and dimensions.
Sink Base Cabinet sizing FAQs
Choices for kitchen cabinets purely depend on your taste, but consulting a professional cabinetmaker will help you get the popular styles available in the market.
Our Conclusion on sink cabinet size chart
In this sink base cabinet size chart guide, you have learned all the standard base cabinet sizes which you can use when fitting your kitchen with a base cabinet depending on the measurements of your kitchen. You need to start by consulting a cabinetmaker to help you understand the required dimensions of the base cabinetry.
How deep should a sink be for a laminate countertop?
For laminate countertops with a backsplash, you can install a drop-in sink that is up to 20 1/2" deep. For laminate or stone countertops without a backsplash, you can install a sink that is up to 22" deep. Consult your installer.
Why is it important to measure the depth of the sink?
Correct measurements are very important to ensure that enough space is allocated for the faucet, fixtures and other materials behind the sin k. Your installer will also consider the bowl depth to ensure there is adequate space underneath.
How to measure sink base cabinet?
To measure your sink base cabinet: Empty the cabinet completely for maximum accuracy and ease of measurement (sink base cabinets should not have drawers or shelves at all to accommodate plumbing). First, measure the total depth of your cabinet, including the frame. (It will likely be 24″, but some cabinets may be irregularly sized.)
How deep is a kitchen sink base?
Standard sink base cabinets are 24″ deep (back to front), and most sinks are designed to fit that size.
How much variation in size of fireclay sink?
Note: for fireclay sinks, allow for 2% variation in size as actual sink size may vary. Because fireclay sinks are installed on a shelf-like support, you don’t need to account for the additional 1″ of depth or 3″-4″ of width; the sink sits directly atop the cabinet, so the only variation you need to take into account is the 2% fluctuation. ...
How wide is a kitchen sink?
The most commonly installed kitchen sink size measures 30 inches wide, which gives a variety of choices when it comes to shapes, such as single bowl orca/square and double bowl. This normal size (30 inches wide) can comfortably fit in at least a 33-inch base cabinet.
What is the standard size of stainless steel kitchen sink?
The standard size of Stainless steel kitchen sink is measured at 19 gauge which is cost-effective for a kitchen sink. However, the better quality comes with an 18 gauge, which is 0.0500 inches. Many findings have recommended 16 to 18 gauges as a choice for kitchen sink improvement.
How many inches is a sink without drain board?
While the average size of one compartment sink without drain board measures 25 inches in length, 27 inches in width, 45 inches in height and 14 inches in depth, the lengthiest compartment sink on average has four compartments very often.
How is stainless steel measured?
Stainless steel skins are measured by gauge, the lower the gauge number the better the thickness, durability, longevity and is equally expensive. For example, an 18 number gauge stainless steel sink provides longer wear and tear over a 22 number gauge stainless steel sink. The standard size of Stainless steel kitchen sink is measured ...
How big is a double bowl sink?
Although this sink comes readily available in many sizes due to its convenience for house owners, the standard size of a double bowl sink is 33 inches in length, 22 inches in width and 8 inches in depth.
What is the thickness of a 16 gauge stainless steel sink?
As I mentioned earlier the lower the number of the gauge the better the quality, hence a 16 gauge stainless steel sink with a thickness of 0.0625 is considered to be a luxury sink. Restaurants and other commercial establishments, on the other hand, use commercial gauges which have a range between 14 to 16 gauge, ...
How deep is a sink?
Similarly taller people can work with the sink without having to crouch. On the other hand, deeper sinks often are more than 10 inches in depth.
