Do fault codes apply to all candy tumble dryers?
The Fault codes above may apply to some or all of the following tumble dryer models from Candy and could apply to other models that use the same electronics and/or software.
Can you put a circle in the dryer?
If the circle has two small dots inside of it, that means you can dry it in your clothes dryer without any problems. If there is only one dot, that means you should dry it on a mild setting, and if there is an X through the circle and square, you should not tumble dry the item.
What are the different symbols for natural drying?
There are a number of different symbols for natural drying. Line drying is notated by a vertical line inside of the square drying laundry symbol. Flat drying is notated by a horizontal line inside of the square drying laundry symbol.
How do dryer balls work in the dryer?
When you first take your clothes out of the washer and put them into the dryer, they’re wet and clumped together, locking the moisture inside. When you put dryer balls into your dryer, they move around and separate your clothes, thus drying your clothes faster.
How do you unlock a dryer?
To lock and unlock the dryer controls: Press and hold the Extended Tumble and - (minus) buttons for 3 seconds. The control lock icon will flash while locking/unlocking, stay on when locked, and turn off when unlocked. NOTE: The Power button can still be used when the machine is locked.
What does it mean when my dryer says Loc?
the control lockTo avoid having someone accidentally start or stop the dryer, press Options and Select at the same time and hold for 10 seconds. “LOC” will be displayed. To remove the control lock, press Options and Select again. Was this answer helpful?
How do you get the child lock off a candy tumble dryer?
In order to activate the Child Lock , press and hold the Drying Level button (the `lock` symbol appears on the display). In order to deactivate the Child lock press and hold the Drying Level button (the `lock` symbol disappears from the display).
How do you unlock a washer dryer candy machine?
When the machine is in the paused mode, a “wash stage” indicator light and option buttons will flash. To restart the programme press the START button once again. If you wish to add or remove items during washing, wait 2 minutes until the safety device unlocks the door.
How do I fix the LOC on my dryer?
Press and hold the Control Lock Key for 3 seconds to unlock the machine. You will notice the machine count down from 3-2-1. The control lock may be a stand alone key, or it could be a dual function key paired with another button like Extra Rinse, Steam, etc.
How do I turn off the control lock on my dryer?
The control lock is a safety feature designed to stop children from accidentally turning the dryer on. It can typically be turned off by holding down the control lock button. In other models of dryer you need to swipe the lock away on the touchscreen.
How do I reset my candy washer?
If you see no change, you can try a Master Reset. This will reset all of the onboard componentry and is often successfully used by appliance technicians. Open and close the door of the washing machine 6 times within 12 seconds. Then, run the rinse/spin cycle without clothing to see if your problems are resolved.
How do you start a candy dryer?
0:062:00Candy Grand'O Vita Condenser Tumble Dryers - Program OptionsYouTubeStart of suggested clipEnd of suggested clipBut they can be smartphone mobile app and then selecting the smart touch program on the dial. AndMoreBut they can be smartphone mobile app and then selecting the smart touch program on the dial. And then touching your phone to the bezel of the machine to create a connection allowing.
Why is my washer locked and won't open?
The most common cause is water left in the machine. Try running a spin/drain cycle. If this fails, the machine can be drained by placing the washing machine drain hose lower than the drum (into a bucket or tray). The door interlock has simply jammed.
How do you open a locked candy washer door?
0:354:31How to Release a Stuck Washing Machine Door - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can gently strike the door to activate the lock. However if the problem continues. You willMoreYou can gently strike the door to activate the lock. However if the problem continues. You will eventually have to replace the lock. Itself.
Why is my washer stuck on lid lock?
– Lock striker that presses down on the lid switch may be out of alignment. – A piece of lint or washing machine detergent has built up over time and hinders the locking of the lid. – The control board sees an open lid switch when it attempts to lock.
Kitchen Appliance Fault Codes
Fault codes or error codes for appliances including washing machines, washer dryers, cookers, dishwashers and fridges.
Deals & Offers
Household appliances from top brands including; AEG, Bosch, Neff, Smeg, Hotpoint, Indesit, Siemens, Miele, Liebherr, Beko, Hoover, Candy, Caple, CDA, De Dietrich, Rangemaster, Britannia, Samsung, Stoves, Beko, Belling, Fridgemaster, Gorenje, Hisense, IceKing, LEC, New World, Montpellier, Zanussi, Whirlpool & many more.
What does the drying laundry symbol mean?
The drying laundry symbol is notated by a square. If tumble dying is OK with the item, there will be a circle inside of the square. If the circle has two small dots inside of it, that means you can dry it in your clothes dryer without any problems. If there is only one dot, that means you should dry it on a mild setting, and if there is an X through the circle and square, you should not tumble dry the item.
What does the square drying sign mean?
If there is only one dot, that means you should dry it on a mild setting, and if there is an X through the circle and square, you should not tumble dry the item. If the square drying laundry symbol has lines inside of it, that means you should be drying the item naturally. There are a number of different symbols for natural drying.
What does the X on a bucket mean?
One line under the bucket means mild wash, and two means very mild wash. If this symbol has a hand inside of it, it means you should only hand wash that laundry item, or if it has an X through the bucket of water, it means you should not wash the clothing.
Why do you need to clean your washer and dryer?
Cleaning your washer and dryer regularly can make the machines run more efficiently, clean your clothes better and keep running for their intended lifespan. Cleaning your washer and dryer doesn’t have to be a huge process but can save you money as well as reduce fire hazards inside of your home.
What happens when you put dryer balls in the dryer?
When you put dryer balls into your dryer, they move around and separate your clothes, thus drying your clothes faster.
What is the longest process of laundry?
One of the longest processes of laundry day is sorting your laundry into different light and dark piles. You can make this process a bit easier by getting a hamper that lets you sort your clothes as you remove them.
When did laundry care become a standard?
Laundry symbols became a standardized part of clothing in 1963 when GINETEX, the International Association for Textile Care Labeling, was formed and created standard laundry care symbols. Before GINETEX, most clothing manufactures wrote laundry care instructions on the tags inside of clothing in the language of the country where ...
