How do I fix the LD on my Kenmore washer?
2 Answers from these members: Ld flashes when the water level does not change after the drain pump is on. You should be able to reset the washer by pressing the STOP button.
What does it mean when your washing machine says LD?
pump system problem - long drainIf Ld (drain pump system problem - long drain) appears in display, the washer is taking too long to drain water. The drain may extend more than 4.5" (114 mm) into standpipe. Check plumbing for correct drain hose installation. Use drain hose form and attach securely to drainpipe or tub.
How do I reset my Kenmore Elite washer?
How to Reset a Kenmore Elite HE WasherPress the "Stop" button twice, and then press the "Power" button. Video of the Day. ... Choose a wash cycle (e.g. "Normal"), and then choose your wash options (e.g. "Hot/Cold" or "Cold/Cold").Press the "Start" button to complete the reset process and restart the washing machine.
What do you do when your Kenmore washer won't drain?
0:086:44Turn the Machine off pull the drain hose out of the standpipe. And check for a clog at the end ofMoreTurn the Machine off pull the drain hose out of the standpipe. And check for a clog at the end of the hose. Sometimes lint or debris can build up in this area and prevent draining.
How do you test a washing machine drain pump?
0:522:51I set my meter to volts EC turn the washer to the drain spin cycle that way when you start the firstMoreI set my meter to volts EC turn the washer to the drain spin cycle that way when you start the first thing that's going to happen it's going to try to drain.
How do you get to the drain pump on a Whirlpool washer?
0:382:27Use pliers to release the clamps securing the drain hose to the pump. And pull the hose off removeMoreUse pliers to release the clamps securing the drain hose to the pump. And pull the hose off remove the screws securing the pump to the outer tub and remove the old pump.
How do I run diagnostics on my Kenmore Elite washer?
3 AnswersWith the washer empty, close the door.Push “control/on” or “Start”Select “Drain/Spin”Select “No Spin” by pressing SPIN SPEED touchpad.Push “PREWASH” option four times within 5 seconds. (If there is no PREWASH option, press RINSE HOLD 4 times in 5 seconds.)C:00 should light up and begin the diagnostic.
How do I reset my front load Kenmore washer?
Turn off and unplug the machine. Plug the washer back in and wait for the control panel to light up. This resets the washer back to the original factory settings.
What causes a washing machine not to drain and spin?
If the washer won't drain or spin, either something is stuck in the washing machine drain hose or pump, or the pump is broken.
How do you unblock a washing machine drain pipe?
Use a funnel to pour about a quarter of a cup of baking soda into the pipe. Next, empty a baster full of vinegar into the drain hose. Top tip: If the blockage is not completely gone, you can repeat the above process. Once you have cleared any debris from the hose, pour hot water in to flush everything out.
Where is the drain pump on a Kenmore Elite washer?
The drain pump is located in the lower front corner of most Kenmore front-loading machines, and the most difficult part of the job may be getting to it. If the machine doesn't have an access panel, as some do, you'll have to take the entire front panel off.
How do you reset the code LD on a top Whirlpool Cabrio Platinum?
Try the Cabrio Reset Procedure Touch any button that you see on your display pad. This will clear the error code. Or you can press PAUSE/CANCEL. Choose a cycle and press START.
How do you reset a Whirlpool washing machine?
Follow these steps to reset your Whirlpool washer:Turn the washing machine off using the control panel.Unplug the washing machine.Wait three minutes.Plug the washer back in, and wait thirty seconds before turning the washer on.
What does error code Ld mean on Maytag washer?
Long Drainmamajtown, Ld code is for Long Drain: this could indicate that the washing machine is taking longer than 5 minutes to drain out enough water to reset the water pressure switch.
What does Ld mean on a Samsung washer?
Common solutions for: Samsung Ld - Long Drain.