Receiving Helpdesk

what does it mean when oven says f2

by Prof. Brain Fadel II Published 4 years ago Updated 3 years ago

If your General Electric oven is displaying the F2 error it could be just a glitch or it could be indicating that a component needs to be replaced. It can appear when you are baking or while the oven is in “Cleaning Mode.” When this error code does appear the oven will be unusable until the problem is resolved.

Full Answer

Why is my oven beeping and saying F2?

Why is my oven beeping and saying F2? If you have a GE oven with an electric ERC, F2 means it is over heating. It is an oven. It is supposed to heat up. For the GE electric ovens and some others, F2 means it thinks the temperature is 590 degrees or higher with the door unlocked or 990 degrees with the door locked.

What does F1 and F2 stand for?

When a flight is confirmed to have passengers infected with Coronavirus (F0), all passengers on that flight (F1) and their contacts (F2), etc. are also found promptly. When a place is confirmed to have people infected with Coronavirus (F0), all people who arrive at the same time with the infected patient are immediately found.

What does oven beeping and display of F2 mean?

  • Hold on the "Start/Stop" button for 10 seconds. This will end the beeping.
  • Open the oven door and check the door latch. If it wiggles, it needs to be tightened.
  • Spray a little WD-40 onto a washcloth and scrub off any rust or debris on the latch.
  • Press the oven door shut gently.
  • Test the oven.

What does error F3 mean on an oven?

When an F3 error code flashes, it generally means that the oven sensor has encountered an error and needs to be replaced. According to Repair Clinic, the error means that a circuit has been exposed or broken.

What does F2 mean on an oven?

December 6, 2021. Oven Repair. If your GE oven has an F2 (or F20) error code, the oven is detecting that the temperature inside the oven has exceeded a preset threshold. In plain English, it means the temperature has exceeded 615 degrees, or 915 degrees Fahrenheit during a self-cleaning cycle.

How do I fix the F2 code on my Whirlpool oven?

F2 - Oven Temperature Is Too High - Check for welded contacts on bake and broil relays. If present, replace control board (clock). For SELF CLEAN models, check door lock operation. Check sensor, sensor harness, and the sensor harness connection at sensor and oven control.

How do I fix F2 on my Kenmore oven?

Disconnect power to the oven and wait 30 seconds, then reconnect power. This provides a power reset and may end the error code. If the power cord is not accessible, disconnect power through the circuit breaker, wait 30 seconds and then restore power.

How do I reset the error code on my GE oven?

Turn off the breaker in your home's electrical service panel and leave it off for a full 30 seconds. Then, turn the breaker back on. In addition to resetting your oven, this measure will force your oven to double-check its own diagnosis. If there's no error in the unit, the error code will disappear after a reset.

Why does my Whirlpool oven keep beeping F2?

In this case, the F2 error code indicates that the oven temperature is too high. Now, this does not necessarily mean that the temperature inside the oven really is too high. The oven control board (clock) is responsible for measuring the resistance of the sensor circuit.

How do I reset my Whirlpool oven?

Reset power to the product:Power unit down by turning off the circuit breaker(s) for one (1) minute.Power unit up by turning on the circuit breaker(s).Start a bake cycle.Monitor the oven for one (1) minute to ensure the error code does not display again.Verify oven operation.

How do I reset my Kenmore oven code?

How to Reset a Kenmore Elite Stove OvenPress the "7" button on the Kenmore Elite keypad.Continue holding the "7" button for at least six seconds until a single beep sounds.More items...

How do I reset my Kenmore self cleaning oven?

Press the oven stop or clear button for three seconds to stop the cleaning cycle. If the oven isn't too hot, the lock will immediately release, allowing you to open the door. If the internal temperature is too high, however, you must wait for the temperature to drop and the lock mechanism will automatically clear.

What does F2 mean on a Maytag oven?

oven temperature is too hotThe F2 code means your Maytag oven temperature is too hot when you set it on bake, broil, or clean. If you see this error, you will have to replace the relay board or oven temperature sensor.

How do I fix error F2 on my GE oven?

If the F2 error code has frozen on the oven after shutting down, then unplug the oven for 30 seconds. Plug the oven back in and see if the error code appears again. At times glitches will occur and the error code will randomly appear.

Is there a reset button on a GE oven?

Turn the circuit breaker to the OFF position or remove the fuse. Wait one minute, then turn the circuit breaker back to the ON position or install the fuse to reset power to the unit. This should reset the electronic controls on the range or wall oven.

How do I reset my oven?

0:091:37How to Reset the Clock on an Electric Oven - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow there are three buttons underneath the clock on this oven this decreases the time the far-rightMoreNow there are three buttons underneath the clock on this oven this decreases the time the far-right button increases. The time and then the middle one toggles.

Whirlpool Oven F2 Error Code

Whirlpool Ovens show the F2 error code if the measured temperature within the oven is too high. This doesn’t necessarily mean that the actual temperature inside the oven is too high, but it could. The reason for that is that the temperature is measured by the control board and the sensors.

GE Oven F2 Error Code

If a GE oven displays the F2 error code, then it’s because the temperature has surpassed the preset threshold for the appliance. Most ovens are programmed to shut down when certain they reach certain temperatures outside of what’s considered “safe”.

Kenmore Oven F2 Error Code

A Kenmore Oven will display the F2 error code when the temperature measured by the oven’s sensors is too high. This could mean that the oven is having problems regulating temperature, oftentimes because the control board or sensors are faulty. However, a damaged heating element can also be what’s causing your oven to overheat.

JennAir Oven F2 Error Code

A Jenn Air Oven will display the F2 error code if the temperature measured within the oven exceeds the safety limit. This could be caused by faulty sensors, damaged wires, a malfunctioning heating element, or a faulty relay board.

HotPoint Oven F2 Error Code

A HotPoint Oven will show the F2 error code if the temperature inside the oven exceeds 590 degrees Fahrenheit with the door unlocked. The HotPoint oven can display this error code when the sensors are malfunctioning, the wires or heating elements are damaged, or if the control board is faulty.

LG Oven F2 Error Code

An LG oven will display the F2 error code when the oven’s temperature sensor is faulty. This can be the result of a short-circuit or damaged wires. Replacing the sensors is typically the solution to the problem. The error could also indicate a problem with the door locking mechanism, depending on which model you’ve got.

What does F2 mean on a GE oven?

If you have a GE oven, the error code F2 on the oven means that the temperature sensor has detected a temperature in excess of the preset threshold. The cause could be a sensor malfunction. However, that's unlikely because there are several GE oven error codes, and a bad sensor should trigger an F3 error code, not F2.

How to test oven temperature sensor?

You test an oven temperature sensor with an ohmmeter in the same way you would conduct a continuity test. However, as Parts Dr advises, it isn't exactly the same thing because you'll never get a reading of zero ohms. Instead, you're checking that the actual resistance measures a value within the working range of the device. To conduct the test, you must locate the sensor in the oven compartment, unplug it and remove it.

What is the temperature of a self cleaning oven?

If you have a self-cleaning oven, you should see an F2 error code when the temperature reaches a value higher than 915 degrees Fahrenheit to 930 degrees Fahrenheit during the Clean cycle. Either way, the control panel shuts off the power, and you can't use the oven until you resolve the issue. Advertisement.

Other FAQs about Stoves which you may be interested in

F2 means that the burner is turned off. This is usually used when you are using a gas stove. It is important to know how to turn off the burners on a stove because if you leave them on, they could get hot enough to burn you.

What does F2 mean on a stove?

F2 means that the burners are turned off. This is normally used when you are using gas stoves. It is very important to know how to shut off the burners on your stove because if you leave the burners on, they could get really hot enough to hurt you. How to Turn Off Burners on Gas Stove

What are the different types of 4 digit F2 codes for Whirlpool stoves?

Whirlpool stoves have four digits after the 2. These numbers represent the burner position. For example, F21 represents the left front burner. To turn off the left front burner, press and hold the button labeled “L” left until the light turns green. Then release the button.

How to find the reason for the F2 code on the stove?

F2 codes are used to identify the burners on the stove. It is important to know what these codes mean because if you don’t know how to read the codes, you could end up damaging your stove. To check the F2 codes, follow these steps: 1 Turn the power switch to the "on" position. 2 Press and hold the "L" left button.

F2-E5 or F2-E6 – Cancel Key Line Open

F2-E1 or F2-E2 – Save Changes Button F2-E3 or F2-E4 – Exit Program Button

F2-E0 – Shorted Touch Pad (Keypad)

F2-E5 or E6 – Cancel key line open F2-E2 or E1 – Save changes button F2-E4 or E3 – exit program button F2-e0 – Shorted touch pad keypad

F2-E1 – Touch Pad (Keypad) Cable Unplugged

F2-E0 – Shorted Touch Pad Keypad: This error occurs if the cable from the touch pad is not plugged into the motherboard correctly. This could happen if the cable was damaged during shipping or installation. To correct this problem, remove the front panel and locate the cable connector. Make sure the cable is fully seated into the connector.

What does F2 mean on an oven?

In this case, the F2 error code indicates that the oven temperature is too high. Now, this does not necessarily mean that the temperature inside the oven really is too high. The oven control board (clock) is responsible for measuring the resistance of the sensor circuit. It does not measure the actual temperature inside the oven.

What happens if you have a self cleaning oven?

If you have a self-cleaning oven, the door lock could be at fault. All appliances these days have safety mechanisms in place that are designed to keep them running safely and smoothly. When one of these parts becomes worn or damaged, your appliance may no longer work or you will notice an error message on this display screen.

Do you need to check oven sensor?

The sensor, sensor harness and sensor harness connection at the oven control all need to be checked to make sure that they are intact. You should also check for high resistance in the temperature sensor circuit.

Can a Whirlpool oven run forever?

Of course, just like any home appliance, you cannot expect your oven to run forever without any kind of wear and tear. Especially considering the fact that this appliance reaches very high temperatures.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version731msRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[08:48:18] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[08:48:18] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[08:48:18] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[08:48:18] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[08:48:18] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[08:48:18] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[08:48:18] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[08:48:18] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[08:48:18] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • Booting (14.38ms)
  • Application (717ms)
  • 1 x Application (97.99%)
    716.56ms
    1 x Booting (1.97%)
    14.38ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed697ms
    • select * from `posts` where `published_at` <= '2025-06-29 08:48:18' and `slug` = 'what-does-it-mean-when-oven-says-f2' and `posts`.`deleted_at` is null limit 1
      2.81ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-06-29 08:48:18
      • 1. what-does-it-mean-when-oven-says-f2
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 178163 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      4.66msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 178163
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      370μs/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      420μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      270μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      688ms/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 7678 limit 1
      480μsview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 7678
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        7XSteQKCbudAVdSaGrQh2UCHwS2QUpF3qQViyqVD
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/what-does-it-mean-when-oven-says-f2" ]
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /what-does-it-mean-when-oven-says-f2
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:25 [ "cookie" => array:1 [ 0 => "_pk_id.64.7c30=7e247b25d6092b38.1751167096.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IlRCNVpWaXQxT3FVUXBTUVlWaCsydkE9PSIsInZhbHVlIjoiL0NXT2dleG10UFJ5QW50M29pc2FHaCs5bCt4ak5RejFkWFc2MFc2M0x0bnlmWWNFWFJTRlo2cW94R0tYdzFraEJPelYzbTRzbTFDanNPMloveHI3QVZzNU03Tkk4anAzVHd1em8vUW9sSkVsR1JNNXZhRGZ5dGR3NEgxcFBVYXYiLCJtYWMiOiIyNGM5MzRlZDdlOTJlNmM2M2I4MDFkZTY3YTVjZDZkYzY5YTcxYTdhYmU1ZGIyZDk3MzE1ZjRhMzEzYmRiZjIyIiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6ImZLa0Z5WjdFR0ROaWt4Z2VnWFBmT3c9PSIsInZhbHVlIjoidk1rUzluQlYvODhZVHl6UjZxbVM2WDJSWHJyOStCZG0xbXd0N3dsRUwrWkRoS0k1Njd3QVJ0MmJ2QitzT3JzN3QvUW5VTDQzc2l5THJMNnJRSHZLYjBKRy93UlVsWUdtVXdYQWVsTmRBZXdlbjlZL09OQlN3WUtjaVl5QlJ2SXQiLCJtYWMiOiIyYmQxMDczYmNiMDY0MzUxNTI4ZWMxNDZlNGM1NjU2YWRhMjQ2OGVmMzI5NGY4NGY5OTJmZTJiNGEwYzU0M2U5IiwidGFnIjoiIn0%3D_pk_id.64.7c30=7e247b25d6092b38.1751167096.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IlRCNVpWaXQxT3FVUXBTUVlWaCsydkE9PSIsInZhbHVlIjoiL0NXT2dleG10UFJ5QW50M29pc2FHa" ] "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.162" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "cf-ray" => array:1 [ 0 => "9572469d2fd8a599-ORD" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.162, 172.70.127.163" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:56 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/what-does-it-mean-when-oven-says-f2" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/what-does-it-mean-when-oven-says-f2" "REMOTE_PORT" => "37758" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.70.127.163" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_COOKIE" => "_pk_id.64.7c30=7e247b25d6092b38.1751167096.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IlRCNVpWaXQxT3FVUXBTUVlWaCsydkE9PSIsInZhbHVlIjoiL0NXT2dleG10UFJ5QW50M29pc2FHaCs5bCt4ak5RejFkWFc2MFc2M0x0bnlmWWNFWFJTRlo2cW94R0tYdzFraEJPelYzbTRzbTFDanNPMloveHI3QVZzNU03Tkk4anAzVHd1em8vUW9sSkVsR1JNNXZhRGZ5dGR3NEgxcFBVYXYiLCJtYWMiOiIyNGM5MzRlZDdlOTJlNmM2M2I4MDFkZTY3YTVjZDZkYzY5YTcxYTdhYmU1ZGIyZDk3MzE1ZjRhMzEzYmRiZjIyIiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6ImZLa0Z5WjdFR0ROaWt4Z2VnWFBmT3c9PSIsInZhbHVlIjoidk1rUzluQlYvODhZVHl6UjZxbVM2WDJSWHJyOStCZG0xbXd0N3dsRUwrWkRoS0k1Njd3QVJ0MmJ2QitzT3JzN3QvUW5VTDQzc2l5THJMNnJRSHZLYjBKRy93UlVsWUdtVXdYQWVsTmRBZXdlbjlZL09OQlN3WUtjaVl5QlJ2SXQiLCJtYWMiOiIyYmQxMDczYmNiMDY0MzUxNTI4ZWMxNDZlNGM1NjU2YWRhMjQ2OGVmMzI5NGY4NGY5OTJmZTJiNGEwYzU0M2U5IiwidGFnIjoiIn0%3D_pk_id.64.7c30=7e247b25d6092b38.1751167096.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IlRCNVpWaXQxT3FVUXBTUVlWaCsydkE9PSIsInZhbHVlIjoiL0NXT2dleG10UFJ5QW50M29pc2FHa" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.162" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_CF_RAY" => "9572469d2fd8a599-ORD" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.162, 172.70.127.163" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1751167098.4456 "REQUEST_TIME" => 1751167098 ]
        request_cookies
        0 of 0
        array:4 [ "_pk_id_64_7c30" => null "_pk_ses_64_7c30" => null "XSRF-TOKEN" => "7XSteQKCbudAVdSaGrQh2UCHwS2QUpF3qQViyqVD" "askhelpdesk_session" => "ZWtfmd222cnsUC5lLSxNHhI9JOQX3MV3CoISj8kd" ]
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Sun, 29 Jun 2025 03:18:18 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IlVVclVXamNKWjdwU2FWUTRjSzAvbGc9PSIsInZhbHVlIjoiRTNDa3N0alo0YWZQMys1ckp4QzNlOWM5YWYwMFo2cjk0SVhaTFNWa0Rndm9SalNRQTNOckFVRzRiVHE0cVI4ZGw1WVd3RjNJZWlhdmJWT0FCVkl5UU5PQ0xUM1lVYmVHNjFZZkFvSVpZWGVaQjQwQlZ1ZWtkU00yU3FzQksvMW0iLCJtYWMiOiI5MzQxMmExZjQ0OTAxMTVjMTZiMGI5ODliMGUwZmQ0MTZlZTFlZDEyOWE2MmE5ZTlmNDY4M2VlZjFiZTFiM2Y0IiwidGFnIjoiIn0%3D; expires=Sun, 29-Jun-2025 05:18:19 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6IlVVclVXamNKWjdwU2FWUTRjSzAvbGc9PSIsInZhbHVlIjoiRTNDa3N0alo0YWZQMys1ckp4QzNlOWM5YWYwMFo2cjk0SVhaTFNWa0Rndm9SalNRQTNOckFVRzRiVHE0cVI4ZGw1WVd3R" 1 => "askhelpdesk_session=eyJpdiI6ImN5YTRZTDdhL3VqWmMzMUJQZUNWS1E9PSIsInZhbHVlIjoiclFIV2VlRjAzRktTWE1ZOVFlQVAzU1JRK21MamdZaTlaVWR0S21qeHZTb3RTa1ZkdUxUVmN2QmVuRzhsN3p3ZXlOVGZTMWk4eHNGMEp4dzI1S1l3RGE0QlREMStabFdDYnlQZFdINWZFM2dQZE11ajVyRndWbzd6bU93dFVVQS8iLCJtYWMiOiI4NzExNjcxZjhhYjdkMDQzYzVhZGRlNjg3YzI5ZmY0OGExYzEzMzcyMGI2NjkzMmRlMDYxZjkzYjg2NjExZjczIiwidGFnIjoiIn0%3D; expires=Sun, 29-Jun-2025 05:18:19 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6ImN5YTRZTDdhL3VqWmMzMUJQZUNWS1E9PSIsInZhbHVlIjoiclFIV2VlRjAzRktTWE1ZOVFlQVAzU1JRK21MamdZaTlaVWR0S21qeHZTb3RTa1ZkdUxUVmN2QmVuRzhsN3p3" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IlVVclVXamNKWjdwU2FWUTRjSzAvbGc9PSIsInZhbHVlIjoiRTNDa3N0alo0YWZQMys1ckp4QzNlOWM5YWYwMFo2cjk0SVhaTFNWa0Rndm9SalNRQTNOckFVRzRiVHE0cVI4ZGw1WVd3RjNJZWlhdmJWT0FCVkl5UU5PQ0xUM1lVYmVHNjFZZkFvSVpZWGVaQjQwQlZ1ZWtkU00yU3FzQksvMW0iLCJtYWMiOiI5MzQxMmExZjQ0OTAxMTVjMTZiMGI5ODliMGUwZmQ0MTZlZTFlZDEyOWE2MmE5ZTlmNDY4M2VlZjFiZTFiM2Y0IiwidGFnIjoiIn0%3D; expires=Sun, 29-Jun-2025 05:18:19 GMT; path=/XSRF-TOKEN=eyJpdiI6IlVVclVXamNKWjdwU2FWUTRjSzAvbGc9PSIsInZhbHVlIjoiRTNDa3N0alo0YWZQMys1ckp4QzNlOWM5YWYwMFo2cjk0SVhaTFNWa0Rndm9SalNRQTNOckFVRzRiVHE0cVI4ZGw1WVd3R" 1 => "askhelpdesk_session=eyJpdiI6ImN5YTRZTDdhL3VqWmMzMUJQZUNWS1E9PSIsInZhbHVlIjoiclFIV2VlRjAzRktTWE1ZOVFlQVAzU1JRK21MamdZaTlaVWR0S21qeHZTb3RTa1ZkdUxUVmN2QmVuRzhsN3p3ZXlOVGZTMWk4eHNGMEp4dzI1S1l3RGE0QlREMStabFdDYnlQZFdINWZFM2dQZE11ajVyRndWbzd6bU93dFVVQS8iLCJtYWMiOiI4NzExNjcxZjhhYjdkMDQzYzVhZGRlNjg3YzI5ZmY0OGExYzEzMzcyMGI2NjkzMmRlMDYxZjkzYjg2NjExZjczIiwidGFnIjoiIn0%3D; expires=Sun, 29-Jun-2025 05:18:19 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6ImN5YTRZTDdhL3VqWmMzMUJQZUNWS1E9PSIsInZhbHVlIjoiclFIV2VlRjAzRktTWE1ZOVFlQVAzU1JRK21MamdZaTlaVWR0S21qeHZTb3RTa1ZkdUxUVmN2QmVuRzhsN3p3" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "7XSteQKCbudAVdSaGrQh2UCHwS2QUpF3qQViyqVD" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/what-does-it-mean-when-oven-says-f2" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]