What does IE mean on Kenmore washer? The IE code indicates that the washer detects a problem with water fill. Make sure that the hot and cold water supply faucets behind the washer are fully open.
Why does my Kenmore washer say ie error code?
Mar 31, 2020 · What does IE mean on Kenmore washer? The IE code indicates that the washer detects a problem with water fill. Make sure that the hot and cold water supply faucets behind the washer are fully open. Click to see full answer.
What does ie mean on a whirlpool washing machine?
Jan 16, 2018 · Order Part Now FAST SHIPPING & FREE RETURNSVisit Link: http://www.jdoqocy.com/click-8524277-12981793
What does ie 1E mean on LG washer?
Kenmore IE or 1E - WATER INLET ERROR // Water not entering washing machine correctly
Why does my Kenmore Elite washer keep turning off?
Aug 07, 2020 · An IE error code indicates that the washer was unable to fill with water. During cold and freezing weather conditions, an IE error code could mean the water in the water supply lines are frozen. Once the temperature increases above freezing, the water supply will resume. Check each of the following for other causes of IE error code: Expand All
How do I fix IE in my washing machine?
If both the hot and cold water taps are not fully open, the IE code will appear on the washer's display. Be sure that both the hot and cold water taps are opened fully, and resume normal operation. If the washer's inlet hoses are kinked or damaged, water may not flow properly into the washer.Aug 7, 2020
How do I clear the error code on my Kenmore washer?
Unplug it for five minutes to allow a reset. The DU code indicates that the door is unlocked. The door lock secures the washer door shut during operation. Once the washer door is closed, the washer can begin operating.Nov 20, 2015
How do I fix Internet Explorer error on my Kenmore Elite washer?
ERROR CODE IE Inlet water supply error Check the water supply faucets behind the washer to make sure they are fully open. Check the fill hoses for kinks or freezing (in winter). Check the inlet water valves. If the valves are defective, replace the inlet water valve assembly.Nov 14, 2019
How do I fix F5 on my Kenmore washer?
The only way to clear the codes is to unplug and let sit, and then plug back in. Then it is good to go again. Various comments online indicate correlation to Water Temperature Sensor or Water Heating element.May 24, 2020
What does F5 mean on a Kenmore washer?
temperature sensorHi! The f5 error has to do with the temperature sensor. The control board circuit does not recognize a change in resistance at the water temperature sensor. Most likely you have a loose connection at the sensor or the sensor is faulty. Another possibility is in the damage of the resistance that heats the water.Sep 5, 2015
What does IE mean in a washing machine?
An IE error code in LG washing machines signals that the machine's washer was not filled with water in the allotted time. This could also be possible due to a faulty water inlet valve or a problem with a drain hose among others.Feb 17, 2020
How do I connect my Kenmore Connect?
1:252:29Kenmore Smart App iPhone Set Up - YouTubeYouTubeStart of suggested clipEnd of suggested clipFind the connect button on your appliance. Press this button for at least five seconds the Wi-FiMoreFind the connect button on your appliance. Press this button for at least five seconds the Wi-Fi signal is on when a connect button light starts blinking. In setting select Wi-Fi.
What happens if the hot water taps are not open?
If both the hot and cold water taps are not fully open, the IE code will appear on the washer's display. Be sure that both the hot and cold water taps are opened fully, and resume normal operation. Kinked or Damaged Inlet Hoses. If the washer's inlet hoses are kinked or damaged, water may not flow properly into the washer.
Can you use floodsafe hoses on LG washing machines?
If the filters on the inlet valves or hoses are clogged, remove them and clean them thoroughly. Using FloodSafe® Hoses. Using FloodSafe® hoses may not be compatible with LG washing machines. The inlet valve on the LG washer opens quickly supplying instant water pressure.
What does IE mean on a washer?
An IE error code also shows up on the washer’s display if a user does not fully open both the hot and cold water taps. So, it is best that you keep both the hot and cold water taps fully open.
Why is my LG washing machine not filling with water?
This could also be possible due to a faulty water inlet valve or a problem with a drain hose among others. In certain instances of cold and freezing weather conditions, an IE error may also indicate that the water from the water supply lines has frozen. So, once the temperature rises above freezing, the water supply goes back to normal.
Why is my washer not letting water flow?
Water does not have a proper flow into the washer if the washer’s inlet hoses have been kinked or damaged. To fix the problem, you will need to straighten out kinks of any kind that may be in the water lines. In case you notice some damage in the inlet hoses, you will need to get them replaced.
What to do if your washer filters are clogged?
In case the filters on the inlet valves or hoses have been clogged, you will need to remove and clean them properly .
Can you use floodsafe hoses on LG washing machine?
Use of third party FloodSafe Hoses. Sometimes, the FloodSafe hoses that you are using may not compatible with your LG washing machine. The inlet valve which is on your machine can open up very quickly to supply immediate water pressure. This may also trigger the FloodSafe hose to shut down as if there has been a leak to cut off the water supply.
Why does my washing machine have an IE code?
Washing machines use sensors to keep track of how full they are, and when the sensor doesn’t pick up enough water , the sensor triggers an error code and shuts the whole thing off. An IE error could mean a number of things: the inlet valve is faulty, or one of the drain hoses is clogged, or there’s simply not enough water pressure.
How to check if a washer hose is clogged?
To check for clogged or kinked hoses, you should start by turning off the water source to the washer. This can usually be found behind the wall next to the appliance. Then, simply pull out the washer and check for any kinks or bends. If you see any, simply adjust them with your fingers and set the washer back in place.
What is the water inlet valve on a washer?
The water inlet valve is responsible for letting water into the front of the washer. It’s controlled by two solenoids — one for hot, one for cold. Some newer models have a water volume switch to control how much water reaches the drum, while other models have switches on their hard controls.
What happens if your washing machine is low?
Low water pressure may cause insufficient water levels in your washing machine. As a result, you may have to deal with a washing machine that does not fill with enough water. To let your washing machine reach its required level of water, you will need at least 20 psi of pressure from the home water supply.
How to check pressure on washer?
Follow these four steps to test the pressure in your washer: 1 Turn ON all the faucets connecting to the washer, 2 Open a cold water faucet in your laundry room and attach a pressure gauge to it. 3 Turn the tap on all the way and wait for 2 minutes. 4 Check the gauge.
Where is the water level switch on LG washer?
The water level switch is located on the rear of the machine, underneath a clear plastic panel that can be easily removed (at the bottom of the panel, in between two screws). LG washers that have a water level switch can malfunction and tell the unit to stop filling before it is full.
Does LG washing machine have water?
You carefully load the LG washing machine, run a cycle, but hear no water flowing into the drum nor see the machine filling. Evidently, some water does flow in — just not enough, since the machine does nothing and an error message appears soon after. In some cases, your washer fills with water more slowly than usual.
How to decipher the error code IE (1E)
The IE (Inlet Error) error code means that for some reason LG washer could not get water in the allotted period of time. The fault can be caused by a simple carelessness of a user, or by serious malfunctions, which require the professional help of a specialist.
The IE (1E) error of LG washer: what to do and how to repair the machine by your own?
Check the water in a tap. Maybe it is turned off or blocked. It is necessary to restore the water supply.
Possible malfunctions, which require repair
In the table below you can view the list of faults that may cause the 1E error of LG washer.
