Whirlpool duet front load washer error code hf If there is the HF error on the screen, the machine is not getting water or it has difficulty detecting a pressure switch trip. If the main control board does not detect water feeding into machine, the system will block the valves and display the error code.
Why is my Whirlpool duet washer displaying error code SUD?
Whirlpool Duet Front-Loading Washer Error Codes
- Check the drain hose and make sure it is not plugged or kinked
- Check the electrical connections at the pump and make sure the pump is running.
- Check the drain pump filter for foreign objects
- If the above does not correct the problem replace the pump
How to fix Whirlpool duet washer error code E01 F09?
Reasons Why Your Washer Displays the Error Code e01 f09
- Your washer’s drain hose may be bent and is not letting water out of your machine. ...
- Be sure that your washer’s drain hose height does not exceed 96 inches or risk having a washer that does not drain water properly.
- Clean your washer’s drain pump filter at the bottom front of your machine by removing objects and particles.
What is error code F24 on Whirlpool duet washer?
Whirlpool Duet Washer F24 Error Troubleshooting and Repair - F24 Error Code - WFW9200SQ00 The F24 error is a water temperature sensor error. It means the water temperature sensor value being sent to the main control board was out of range when the washer was in the part of the cycle that heats the water.
How to test the pressure switch on a whirlpool duet?
- Unplug the washing machine!
- Using a 5/16" socket wrench or an adjustable wrench, remove the three screws from the top rear of the washer.
- Lifting from the rear, remove the top panel.
- The top panel will still be connected by wires and hoses.
How do I fix the HF code on my Whirlpool washer?
0:052:11Whirlpool Duet Washer -- HF ERROR -- Flow Meter Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe disconnect the screws on the back of the dryer that holds it to the washer. There's just fourMoreWe disconnect the screws on the back of the dryer that holds it to the washer. There's just four Phillips head screws. And then we can open up the door.
How do I fix my FH code?
Reset the FH error code by removing the washer's power source. The FH error code on your Kenmore Elite washing machine is an indicator that there is a problem with incoming water. When there is little water coming into the machine, the FH code will appear and the washer will stop.
What is HF code on Whirlpool Duet washer?
No water detected entering machine or Pressure switch trip not detected. If after 30 seconds the control does not detect water entering machine and then valves will be turned off and the error code will be displayed.
Why is my washer blinking HF?
The FH error code indicates that the washer control does not detect water entering the machine within 30 seconds after the fill valves have been opened. It is also displayed after 8 minutes if the flow sensor has detected 10.5 gallons passing through it without the water level pressure switch tripping.
Where is the pressure switch on a Whirlpool Duet washer?
Locate the pressure switch inside the washer cabinet. From the rear of the washer, the switch will be on the rear left corner of the cabinet. The pressure switch is round with a wiring harness connecting to the back of the switch.
What does a washing machine flow meter do?
Flowmeter Specifications. This part continually measures the amount of water entering the tub. It will make adjustments if too much or too little water is present.
How do you bypass the water level sensor on a washing machine?
How To Bypass Washing Machine Water Level SensorLet us say you have 2 lbs of clothes.Add the 2 lbs of clothes in the washtub.Before commencing the wash cycle, pour 4 lbs of water over the clothes and let water to soak into the fabric.Start the wash cycle. ... You have successfully bypassed water level sensor.More items...•
How do you run a diagnostic on a Whirlpool Duet washer?
0:202:03Whirlpool Duet Washer Diagnostics & Error Codes - YouTubeYouTubeStart of suggested clipEnd of suggested clipChoose any three buttons except for power or start and press them in sequence. One. Two three oneMoreChoose any three buttons except for power or start and press them in sequence. One. Two three one two three one two three. If you got it right you'll know the duet washer has three diagnostic modes.
How do I fix my Whirlpool Duet f20?
Whirlpool duet washer error codes f20On the control panel, press the Enable-Disable button. It will reset a program and remove the error.To reset the f20 error code, exclude the program crash of the Whirlpool washer. To do this, de-energize your washing machine for 10-20 minutes, then turn it on back.
How do I reset the F5 on my Kenmore washer?
It goes through the wash cycle and then ends with an F5 error and recurring beeping alarm. The "lid locked" LED flashes as well. The only way to clear the codes is to unplug and let sit, and then plug back in. Then it is good to go again.
What does F mean on Maytag washer?
Maytag F/02 - Drain Cycle Too Long The manufacturer has assigned this error or fault code to indicate that the washing machine drain cycle is taking too long. After 8 minutes of drain time the error code is displayed. Press PAUSE/CANCEL twice to clear the display.
How do you reset a Kenmore high efficiency washer?
If you have started a load in your Kenmore Elite HE washer and need to reset it, simply press several buttons on the control panel.Press the "Stop" button twice, and then press the "Power" button. ... Choose a wash cycle (e.g. "Normal"), and then choose your wash options (e.g. "Hot/Cold" or "Cold/Cold").More items...
What does the H/F error code mean?
The H/F error code indicates that the control did not sense any water filling into the unit. Be sure that the drain hose is not down into the drain pipe too far; this will create a siphon & the H/F error code. Also be sure BOTH the hot & cold water are on & working.
How to clear error code on Whirlpool washer?
Furthermore, how do I clear the error code on my Whirlpool washer? To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
How to cancel wash cycle?
Press the "Pause/Cancel" button twice to cancel the wash cycle.
Who said if you do then the tube on the other end to the tub is connected?
Jon Grella : If you do then the tube on the other end to the tub is connected.
What is the pressure switch on a washing machine?
Jon Grella : In your machine there is a pressure switch that controls how much the tub fills with water. If the wash is set for a normal load size it knows when to and how much water it needs to fill the tub with