Flocking the pool is essentially the introduction of a certain chemical compound that binds with floating debris in pool water. This debris literally clouds up the water and can be anything from algae to dirt or any number of minute particles that are not captured by the filtering system. Contents hide
Does flocking a pool really work?
You raise the chlorine to the shock level (they had that part right) but you have to maintain it at the shock level until all the algae is dead. When you shocked the pool you killed a lot of algae. but, as son as the chlorine level dropped back below shock level they algae reproduces.
How do you flock a pool?
They are worth visiting after a period of rainfall when the waterfall is at its highest volume and the water flows down into the natural pool below. The falls can be accessed via a short but steep walking trail through the dense forest from the old ...
When to use a flock for a swimming pool?
Things You Will Need
- Concentrated filter cleaner
- Manual pool vacuum
- Garden hose
How to flock your pool?
- Increase the Water Level. If you need to vacuum your pool, you need to fill the pool above maximum because vacuuming will make the water level drop. ...
- Since floc can affect the pH value of the water, you would need to make sure to balance the pH level of the pool to about 7.0
- Dilute the floc based on the direction in the body of the product. ...
When should I floc my pool?
When should I add Flocculant to my pool water? If you have cloudy water but your water chemistry is balanced (pH, alkalinity, and chlorine levels) and your filters are clean, add pool flocculant.
Can you swim after flocking a pool?
It is recommended that you do not swim in the pool whilst using flocculant. The water needs to be still and not moving for the floc to work. Otherwise, the floc may not effectively clump together.
What does it mean to flock your pool?
Flocking the pool is essentially the introduction of a certain chemical compound that binds with floating debris in pool water. This debris literally clouds up the water and can be anything from algae to dirt or any number of minute particles that are not captured by the filtering system.
How long after flocculant Can you swim?
Run your filter until the water is clear Once the clarifier has been added to your pool, turn on the pool filter and run it 24/7 until the cloudiness is gone. This can take two to three days, but swimming in the pool at this time is safe after about 20 minutes.
Why is my pool still cloudy after flocking?
If all the chemicals are balanced, but water is still cloudy, there might be fine particles inside the pool, and you need to use a clarifier or pool flocculant and then vacuum up the pool. If all do not work, try backwashing your filter since it might be clogged.
Does flocculant reduce pH?
Because flocculants can affect the pH level, you'll want to start out with it at about 7.0 so you can make sure your sanitizer keeps working at maximum efficiency.
What to do after you flock a pool?
1:242:35How To Clean A Cloudy Pool? "Shock And Floc" - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne half hour after shock in the pool water spray. The entire port. Across the pool surface asMoreOne half hour after shock in the pool water spray. The entire port. Across the pool surface as evenly. As possible step four run the pool filter for two hours only.
Is pool clarifier the same as floc?
Clarifier keeps the bounded matter at the top of the pool to be grabbed by the pool filter. Meanwhile, pool floc snags the particles, assembles them, and then sinks them to the bottom of the surface.
How do you vacuum a pool after floc?
You can even vacuum twice to be sure to catch everything. Usually while vacuuming to 'Waste', you can run the garden hose into the pool to keep the water level the same. But when vacuuming after floccing, we recommend topping the water up afterwards, as the inflow of water will also disturb the debris at the bottom.
How often can you flock a pool?
You should be turning your pool over - moving your entire pool volume through your filter - at least twice a day (three times a day for a commercial pool).
Can you vacuum a flocculant to filter?
Flocculants should only be used if you can vacuum to waste. Vacuuming flocculant into a filter can gum up the filter, require major cleaning of a sand filter or DE filter, and destroy a cartridge. If you leave a filter in filter-mode, some of the floc'd particulates will make their way into the filter and get trapped.
Does flocculant work on algae?
Flocculant, or floc, is a chemical used to clear up algae or cloudy pool water. Flocculant works very quickly and clears cloudy pool water by clumping small particles together and dropping them to the bottom of the pool to be vacuumed out.
How does a pool floc work?
Pool floc and pool clarifier work in roughly the same way, says Swim University: They coagulate the tiny particles that cause cloudiness into larger ones that can be removed. The difference between them is that clarifier forms relatively small particles that can be removed by the pool filter.
How to clean a cloudy pool?
The preferred method to clean a cloudy pool, according to Mr. Pool Man, is to clean or backwash the filter because dirty filters are one of main causes of cloudy water. If your pool has a sand or DE filter, you should backwash it, and if it has a cartridge filter, remove the cartridge and either hose it down or soak it in a tub filled ...
Do you need floc for pool filter?
If you're in the habit of regularly cleaning or backwashing your pool filter, you shouldn't need pool floc very often, but it's nice to have some on hand anyway. Floc, which is more properly known as flocculant, isn't the same as pool clarifier, but it's close, and it will take care of cloudiness faster than the best pool clarifier.
Can you leave a hose in a pool?
Many homeowners simply leave a garden hose in the pool while they're vacuuming , but if this causes the debris to disperse in the water, fill the pool later. After vacuuming and topping off the water, check the pH balance again, adjust if necessary and then set the pump to "recirculate" and jump in.
Can you use floc with a cartridge filter?
If you're in a hurry — perhaps you're getting ready for a pool party — flocculant works faster, but you can't use it with a cartridge filter unless you have custom plumbing that includes a bypass. Pool floc will clog a cartridge filter.
Why is my pool shocking?
The most common reason for shocking your pool or spa is to deal with combined chlorine. There are three measurements of chlorine in pool or spa water: free chlorine, combined chlorine, and total chlorine.
When to shock a pool?
The ideal time to shock your pool is in the evening after all swimming is complete. In the evening because the sun will not be boiling the chlorine out of your pool, and after everyone is done swimming because shocking is going to bring the chlorine level up to a level that may be irritating to skin and eyes.
What happens when it rains in a pool?
Also, as the rain is falling through the air, it picks up contaminants such as pollen and pollutants and dumps them in your pool. Heavy rain may cause ground runoff to empty into your pool. Thou shalt shock if thy combined chlorine level is at .5 or higher.
What is shocking chlorine?
Shocking is the process of adding chemicals (usually chlorine) to your pool to: break apart chloramines, also known as combined chlorine. quickly raise your chlorine level. kill algae, bacteria or other harmful pathogens. Chloramines Bad, Free Chlorine Good.
Why is chlorine free?
We like free chlorine because when it interacts with these potentially harmful things, it usually kills them and off-gasses them into the atmosphere.
