How do I fix the LO FL on my Whirlpool washer?
Make sure the drain hose is not kinked or clogged. Straighten the hose for adequate water flow. Remove any blockage from the drainpipe of a utility sink....If code is still displayed:Unplug the washer or disconnect the power for one minute.Plugin the washer or reconnect the power.Re-select the cycle and press Start.Jun 12, 2020
How do you fix your washer when it says LF?
If LF (too long to fill) appears in display, the washer is taking too long to fill. It's possible that the drain hose extends more than 4.5" (114 mm) into standpipe. Check plumbing for correct drain hose installation. Use drain hose form and attach securely to drainpipe or tub.Apr 30, 2021
How do you reset the low flow on a Whirlpool washer?
Unplug the washer or disconnect the power for one minute. Plug in the washer or reconnect the power. Re-select the cycle and press Start.Apr 30, 2021
What does LO FL mean?
F8 E1 or LF or LO FL Error Code in the Display of my Whirlpool Washer. Error Code F8 E1, LF, or LO FL all indicate that no water is detected entering washer after 13 minutes. If the washer has an F8 E1, LF, or LO FL error, the door will be locked, and the control will be unresponsive.Jun 29, 2020
What does LO FL mean on my Maytag washer?
The F8 E1 or Lo FL error code means your washer is not detecting the correct amount of incoming water. If the washer has an F8 E1 error or LO FL error, the door may be locked, and the control may be unresponsive.Apr 29, 2021
What is LF on Whirlpool washer?
Whirlpool Washer LF Error is a water fill error, it stands for Long Fill. It means that the main control has not gotten a signal back from the water pressure sensor which means that water is not filling the tub or not filling the tub fast enough. The control will shut down the cycle and report the LF error.
What does Fl mean on washer?
If Samsung Washer FL Error Code appears on the display panel, it's likely a door lock malfunction. It indicates the door lock cannot be locked after several attempts.
What does Fl mean on front load washer?
Door lock errorSamsung Front-Load Washer Fault CodesFault CodeWasher ProblemLO or FLDoor lock errordsDoor is not lockeddcUnbalanced loadSud (F70)Too many suds13 more rows•Jun 28, 2021
Why does my washer say low flow?
If you only notice low water pressure when using the hot water setting, then you probably have a clogged hot water line (or vise-versa for cold water). The easiest solution to this problem is to replace the clogged line with a new one. Water lines can be purchased either online or at most major home improvement stores.
How do you reset a Whirlpool washing machine?
Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.
How do you read a Whirlpool washer code?
0:173:30Identifying a Whirlpool Fault Code - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf your machine is displaying F H that is an input error. It means the machine has a problem fillingMoreIf your machine is displaying F H that is an input error. It means the machine has a problem filling with water check for a kinked or trapped hose.