What does fat stand for?
What does FAT stand for? Rank Abbr. Meaning FAT File Allocation Table FAT Fatalities FAT Factory Acceptance Test FAT Faculty of Advanced Technology (Universi ... 52 more rows ...
What does fat mean in manufacturing?
The Factory Acceptance Test (FAT) is a process that evaluates the equipment during and after the assembly process by verifying that it is built and operating in accordance with design specifications. Click to see full answer. Keeping this in view, what does acronym FAT mean?
What is instrumented safety system fat?
The FAT is a customized procedure to verify the instrumented safety system and the instrumented safety functions according to the specification of safety requirements. The FAT includes appropriate general test procedures for the verification of the proper functioning of the safety instrumented system.
What is the fat test?
For FAT, all of the major system components are assembled in one place. Although the final, installed system may extend to widely dispersed in the actual plant site, the FAT will test the system in one manageable area. Using simulations, the test can evaluate the systems network, redundancy, backup/restore, and other function.
What does FAT mean in engineering?
factory acceptance testFinal Acceptance Test (FAT) is the factory acceptance test of equipment at the vendor's workshop.
What does FAT stand for in industry?
Factory Acceptance Testing (FAT) helps verify that newly manufactured and packaged equipment meets its intended purpose. The FAT validates the operation of the equipment and makes sure the customers' purchase order specifications and all other requirements have been met.
What does FAT stand for in project management?
Executing a Factory Acceptance Test (FAT), is a major milestone in any project, well, at least it should be. It's part of the project that can sometimes be overlooked. It's also the part of the project that, if done incorrectly, is going to come back and cost you tenfold down the line.
What does FAT mean in electrical?
Factory Acceptance Testing (FAT) is an optional step that occurs after design and fabrication to verify that the equipment follows design specifications and operates properly.
What does the term FAT stand for?
FAT stands for File Allocation Table.
What is a FAT for equipment?
A Factory Acceptance Test (FAT) is a series of tests and inspections that are completed by an equipment supplier. The purpose of the FAT is to identify any problems or issues with the machine before it is shipped to the purchaser.
What is UAT and fat?
In industry, a common UAT is a factory acceptance test (FAT). This test takes place before installation of the equipment. Most of the time testers not only check that the equipment meets the specification, but also that it is fully functional.
What is a fat test?
The FAT is a customized procedure of checking the safety instrumented system and the safety instrumented functions according to the safety requirements specification. The FAT includes appropriate general testing procedures for verification of the correct operation of the safety instrumented system.
Why is fat important?
For that reason the FAT is a valuable check of the safety issues. The safety of your employees is always a top concern so the quality assurance gives you the peace of mind that all components of your system are functioning the way they should , and within the full range of operating specifications.
What is pre-planning in FAT?
A pre-planning is necessary for an efficient FAT. The planning presents a set op of the appropriate tests to be carried out and who is responsible for developing the test cases. Appropriate levels of competence and independence of assessors are required. The realization of tests shall be described as well as the personnel responsible to carry out the test. The test protocol is developed during the planning and furthermore who is responsible to attest the test protocol.#N#The procedures to carry out the FAT shall be well defined and documented in a proper way. Each test procedure shall be described in a logical sequence i.e. How to test the application software and hardware. The needed competence for involved test personnel is described during the planning. It is recommended that personnel with experience suitable for the intended process application and safety instrumented system deals with the FAT planning.
What should be done before a fat test?
Before the FAT begins, the manufacturer should present the FAT procedure to the client for review and approval. The procedure should include testing of as much functionality as is practical in the factory and, where possible, should show pass/fail criteria or desired results for each item tested.
Why is fat testing done?
FAT is typically conducted in order to assess any discrepancies and non-conformities, as well as develop a process for how they are to be handled. Deviations or abnormalities observed during testing are documented in a problem report and corrected prior to shipment.
Where is fat performed?
The FAT is normally performed at the manufacturer work shop . The manufacturer checks that the safety instrumented system works as intended and according to the requirements stated in the safety system works as intended and according to the requirements the safety requirements specification, NRN.
Do you need to test equipment before a fat sterilizer?
Once the procedure is approved, the manufacturer should test the equipment before the FAT begins. Keep in mind that some clients like to visit the factory during FAT, so this “pre-test” will confirm that the sterilizer is set up with the correct options, ensure a smoother FAT process and minimize down-time during the FAT.
What is the purpose of fat?
The purpose of the FAT is to make sure that the system works to the satisfaction of the provider and the end-user. If the changes are identified during FAT, these identified changes should be done before going for commissioning or installation. FAT is a great opportunity to demonstrate system quality and efficiency.
Why is Fat important?
The primary purpose of the FAT is to minimize the occurrence of faults during the process of commissioning. It is a cost-effective way to fix errors while testing the system. The loop checking at FAT can save remarkable time and effort during the commissioning and startup at the plant site.
Can a fault be corrected before a FAT?
Depending on contract specifications, the end-user can demand that any fault, small or large, must be corrected by the system provider before the FAT. A failure to correct a fault in a pre-agreed time frame can be sufficient justification for the end-user to even cancel the contract.
Final Acceptance Test, Systems Integration Testing, Site Acceptance Testing
FAT, SIT, String and SAT are provided and overseen to help clients lessen the chance that non-conformities get through the supply chain which may increase the risk of failure, impact a project schedule, cause costly overruns, loss of life or environmental impacts.
Service details
Final Acceptance Test (FAT) is the factory acceptance test of equipment at the vendor’s workshop.
Deliverables
Statements of Compliance against approved test procedures and with the applicable specifications or Inspection/Test reports are the typical deliverables for these services.
What is the purpose of a FAT?
The main objective of the FAT is to test the instrumented safety system (logic solver and associated software). The tests are normally carried out during the final part of the design and engineering phase before the final installation in the plant.
What is the most important part of a fat?
The most important part of the FAT addresses the specification of test cases, that is, a clear description of test cases, well-structured test procedures and relevant test cases. It is important to note here that there are different levels of a FAT.
What is SAT and fat?
FAT and SAT is a big part of project execution and installation. Many projects require a Factory Acceptance Test before going on site. This testing period involves How to the specified design has been properly implemented in the software.
What can both parties create based on the results of the FAT?
Based on the results of the FAT, both parties can create a list of additional elements that must be addressed before shipment.
When should changes be done in FAT?
There are changes identified during the FAT. These changes should be done before going commissioning or installation. The contractor will have only small changes to make in the software documentation rather than a time consuming effort at the end of the project
