What does F9 E1 mean on a Maytag washer?
This is a common error code among Maytag washers but it is simple to fix. All of the experts state the problem is likely a drain clog or an improperly placed drain hose. The Maytag washer code F9 E1 means the water in the drum is too long to drain out. It’s called a long drain and a draining system problem.
What does F9 mean on a whirlpool oven?
The F9 error usually means the door switch circuit system is faulty. This can be addressed by checking the door switch itself. If the door switch is dirty or caught in one position, use a damp cloth to wipe the switch clean and then wiggle the switch slightly to make sure the switch moves back and forth. Herein, what does f9 mean on an oven?
What does E1 code F9 mean on a drain pump?
Another F9 E1 code should prompt you to look at the drain pump. You should check your warrant before you start getting serious with a drain pump inspection. Those with newer machines may find they are still under warranty and tampering with the drain pump may void the warranty.
Where is the filter on a Maytag Maytag washer?
Maytag, and the other brands of parent company Whirlpool, have access to the drain pump and filter in the front of the machine. Look for a front panel in the corner on the front and remove the panel to find the filter. Once you open the panel, you will see a round twist knob. That is the filter.
How do I fix F9 error on Maytag oven?
Reset the appliancePower unit down by turning off the circuit breaker(s) for one (1) minute.Power unit up by turning on the circuit breaker(s).Monitor the range or oven for one (1) minute to ensure the error code does not display again.Verify the range or oven operation.
How do I fix error code F9?
Reset the Oven Sometimes, the F9 error code is the result of an electrical fault that has magnetized the circuitry. Resetting the oven by disconnecting the power for five minutes will demagnetize the circuitry and resolve the F9 error.
How do you clear the error code on a Maytag oven?
On a Maytag model with clock type C or D, the easiest error code to resolve is F6. Simply turn off the oven, unplug it for five minutes, and then plug it back in and restart. Also, make sure the fuse wasn't tripped at the circuit breaker and that the outlet provides the correct voltage for the oven.
What does F9 mean on a gas stove?
If the Control Panel Display lights up error code “F-9” it means oven failed at exceeding 150ºF after 5 minutes of preheating.
How do I reset my F9 oven code?
Reset the appliancePower unit down by turning off the circuit breaker(s) for one (1) minute.Power unit up by turning on the circuit breaker(s).Monitor the range or oven for one (1) minute to ensure the error code does not display again.Verify the range or oven operation.
How do you clear an F9 code?
How to Remove the F9 Code From MaytagHold on the "Start/Stop" button for 10 seconds. This will end the beeping. ... Open the oven door and check the door latch. ... Spray a little WD-40 onto a washcloth and scrub off any rust or debris on the latch. ... Press the oven door shut gently. ... Test the oven.
Why does my Maytag stove keep beeping?
When the oven beeps, it is to alert the user that the food is complete. Some models will continue to beep as a reminder to take the food out of the oven. Convection ovens also sometimes include a temperature gauge that will cause the oven to beep when it's at 75% of the original cooking time.
How do you change the temperature sensor on a Maytag oven?
1:363:26How To: Whirlpool/KitchenAid/Maytag Oven Temperature Sensor ...YouTubeStart of suggested clipEnd of suggested clipLeave the panel to release the locking tab on the upper left corner and remove it like here theMoreLeave the panel to release the locking tab on the upper left corner and remove it like here the temperature sensor in the left upper corner. Using the flat blade screwdriver.
What does f3e2 mean on a Maytag oven?
There may be a problem with the Oven Temperature Sensor, the Warming Drawer Sensor (if so equipped), or the associated wiring. Power unit down by turning off the circuit breaker(s) for one (1) minute. Power unit up by turning on the circuit breaker(s).
How do I fix F9 error on my GE oven?
Step 1 – Try to reset the oven. ... Step 2 – Turn the power off. ... Step 3 – Dislodge the control panel. ... Step 4 – Check the door lock mechanism. ... Step 5 – Check the wiring. ... Step 6 – Test the door lock. ... Step 7 – Replace the control board. ... 9 Signs It's Time to Replace Your Dishwasher.
What does F9 mean on a Frigidaire stove?
On Frigidaire stoves, an error code with F9 means that the door on the stove isn't closing properly. This code may come up when something is clogging the latch, the door latch is broken or the switch assembly needs to be replaced. Some owners have found that this error code shows up after they run a self-clean cycle.
What does F9 mean on a Amana oven?
There may be a problem with the Oven Door Latch, the Door Lock Switch, or the associated wiring. Power unit down by turning off the circuit breaker(s) for one (1) minute. Power unit up by turning on the circuit breaker(s). Monitor the oven for one (1) minute to ensure the error code does not display again.
What Should I Check First?
The first thing to do is to look at the water. You will want to see if it’s draining at all. Water that flows slowly indicates you have a stuck object. You will need to check for clogs and other objects throughout the hoses and filters.
Check for Clogs
While you are looking at the drain hose, you should also check it for clogs. There are two ways to do this. The easy way is to take the end out of the drain pipe and blow hard into it to see if anything clears out the other end.
Resetting the Machine
Once you’ve checked the drain hose and cleaned the filter, you will need to see if the code will clear. To do that, try the following steps:
Check Your Warranty
You should check your warrant before you start getting serious with a drain pump inspection. Those with newer machines may find they are still under warranty and tampering with the drain pump may void the warranty.
Checking Your Drain Pump
The drain pump is under the front panel where you found the filter. It should be near the filter. First look to see if any of the wires are burnt, broken, frayed or if the harness appears in good shape.
Can I drain my Maytag washer manually?
Yes, manually draining your Maytag washer is easy, but could be messy. You will need some towels and a bucket. Start by turning off the water to your machine and then unplugging it from the wall.
