What does E2 and F5 mean on a whirlpool washer?
The error message E2 and F5 indicate that the door is not locking properly. The door must be completely closed for the washer to operate. The door may look as if it's closed, but it may not be latched. Open the door and firmly close it. Before you close the washer door, check for laundry items sticking out beyond the door opening.
What does F5 mean on a Maytag washing machine?
What does f5 mean on a Maytag washer? F5 E1. Lid switch fault. Check/ Repair. This code is displayed if Start is pressed with the lid open. Click to see full answer. Herein, what does f5 mean on a Maytag washing machine? F5 E1. Lid switch fault. Check/ Repair. This code is displayed if Start is pressed with the lid open.
How do you fix error code F5 on Whirlpool washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle. What does f5 and e2 mean on a washing machine?
How do I fix error F5 E2?
1 Answer. F5E2 error code means the lid lock will not lock or the lock assembly has failed. This error can happen if the lid is not closed all the way due to some type of interference. To remove the code, press pause or cancel button twice and the power button once.
How do I fix E2 error on my washing machine?
0:060:58How to deal with E2 problem (error code) of front load washing machine?YouTubeStart of suggested clipEnd of suggested clipMachine is not closed properly. Solution first check whether the front door of the washing machineMoreMachine is not closed properly. Solution first check whether the front door of the washing machine is closed close the front door again then press the start pause key to check whether e2 disappears.
What does F5 on a washer mean?
What could that mean? The Maytag washer code F5 is an alert that tells you the lid can't lock. There could be some clothing or other obstruction in the lid preventing it from locking. This is one of the simplest problems to fix.
How do I fix F5 error on washing machine?
0:245:08Whirlpool, Maytag Washer - F5/E2 error codes - Diagnostic & RepairYouTubeStart of suggested clipEnd of suggested clipOkay today we're working on a Cabrio washer the customer claims there's an error code so we're gonnaMoreOkay today we're working on a Cabrio washer the customer claims there's an error code so we're gonna do is put it in diagnostic. What you do is you take and you take three of your buttons. So not the
What is E2 on a washing machine?
E2 on the washing machine display indicates that the water is draining too slowly. This usually occurs when the sewage is clogged, the filter is dirty, or the hose is blocked.
How do I fix the F5 on my Whirlpool washer?
0:2011:28How to Fix Whirlpool Cabrio Washer Flashing F5 Error Code - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's another one-quarter screw that holes the top i already have removed two of them one on the leftMoreIt's another one-quarter screw that holes the top i already have removed two of them one on the left and one on the right as you see right there now i'm going to remove the third.
How do I fix E2 error on my Whirlpool washer?
Whirlpool error F05 or E2 This means there's something wrong with the water temperature sensor. Time to reset the Whirlpool. Switch off the washing machine and remove the connector for 30 minutes. Afterwards, plug the washing machine back in and start it up again.
What is F5 error code?
An F5 error code indicates that the fan on the outdoor or indoor unit has been running at a very low speed for a set period of time. This occurs when either the controller on the board or the fan malfunctions.
How do I fix error F5 E3?
The F5 E3 alert indicates there is issue with the lid lock. Do not force the lid open, as permanent damage could occur. Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid.
What does FS mean on my washing machine?
The 'FS' error code indicates a freezer sensor error. This error will require service. Email.
How do I fix e5 error on my Whirlpool washer?
This alert indicates the load is out of balance. The washer is running a load-balance correction routine. Allow the washer to continue. If the dial is flashing and the washer has stopped, redistribute the load, close the lid, and press START/PAUSE.
What does e1 F5 mean on a Whirlpool washer?
Description. Error Code F5E1 informs you the washer door cannot be locked or unlocked and the machine needs to be reset. To reset washer, unplug the power cord from the wall outlet or turn off your home circuit breaker.
What does F5E2 mean on a Cabrio washer?
The Cabrio Washer F5E2 error code means the lid lock will not lock or the lock assembly has failed. This error can happen if the lid is not closed all the way due to some type of interference.
How to remove code from washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
