What does E90 mean on an Intex hot tub?
If alarm code E90 is displayed on the control panel, it means no water is flowing through the system. Check the attached troubleshooting guide. Spa E90 Troubleshooting. Subsequently, question is, how do you reset an Intex hot tub?
How do I fix error code E94 on my Intex hot tub?
If Intex hot tub error code E94 appears, unplug your hot tub and plug back into the GFCI/RCD plug and restart the hot tub when the spa water temperature is higher than 39ºF. If the ambient temperature is below 39°F (4°C), we recommend not to use the spa.
How do you fix an E90 code on a hot tub?
If the E90 code appears after running for a while: Check and ensure there is no debris inside the spa tub inlet and outlet grids. If there is debris inside, turn the control unit off, unscrew the spa inlet/outlet grid with a Phillip screwdriver.
What does the alarm code E90 mean on a spa?
If alarm code E90 is displayed on the control panel, it means no water is flowing through the system. Check the attached troubleshooting guide. Spa E90 Troubleshooting.
How do I fix my E90 in my Intex hot tub?
If the E90 code appears after running for a while: Check and ensure there is no debris inside the spa tub inlet and outlet grids. If there is debris inside, turn the control unit off, unscrew the spa inlet/outlet grid with a Phillip screwdriver. Clean and replace it back. Make sure the spa water is clean and sanitized.
What is E90 error?
As for the E90 fault. It indicates no water flow. They shut down for two reasons. Without flow the heater could over heat and cause a fire.
How do you reset an Intex hot tub?
0:324:58Intex PureSpa Error Code Fix and Reset - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere now the first thing i thought about was well i did read somewhere it said press and hold theMoreHere now the first thing i thought about was well i did read somewhere it said press and hold the power button for five seconds in close proximity. To the control base.
What does error code E94 mean on Intex hot tub?
the water temperature is too lowIf alarm code E94 is displayed on the control panel, it means the water temperature is too low. If alarm code E94 appears, unplug and plug back in the GFCI/RCD and test the GFCI/RCD to restart the system when the spa water temperature is higher than 39ºF (4ºC). http://www.intexdevelopment.com/support/faqlist?
Why does my Intex spa say end?
If alarm code “END” is displayed on the control panel, it means that the actual water temperature could not rise to the set temperature after 72 hours of continuous heating causing the rapid heating and water filtration functions to be temporarily disabled.
What does error code E95 mean on Intex hot tub?
water temperature is too highIf alarm code E95 is shown, it means the water temperature is too high. Let the spa water cool down to 104ºF (40ºC) or below, reset the control panel information by unplug and plug back in the GFCI/RCD, and reset the GFCI/RCD to restart the system.
How do you fix the error code on a hot tub?
How to Troubleshoot a Hot Tub FLO Error CodeShut down the spa at the breaker.Make sure there is no debris in the water that can get sucked into the pump.Take out all of the filter(s) and set them aside.Turn spa back on at the breaker with the filters out.Apr 13, 2012
Do hot tubs have a reset button?
A spa heater has a high-limit reset button. A spa or hot tub provides a form of personal relaxation known as hydrotherapy. The spa's pump and heater provide a soothing environment by circulating water through jets and increasing it to the bather's desired temperature.
How do I unlock my Intex hot tub?
0:321:23How To Unlock Hot Spring Controls: "Spa Lock" - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's actually quite simple simply hold down the options and the light buttons. For about four toMoreIt's actually quite simple simply hold down the options and the light buttons. For about four to five seconds. You'll see the padlock on the display here will disappear.
How long does the Intex Pure spa take to heat up?
The water temperature rises 2-3ºF (1-1.5 ºC) per hour. As with any large volume of water, it will take time to heat it up. Be aware that the initial heating after filling may take as long as 20 hours to reach the maximum temperatures depending on the starting temperature of your fill-water and external conditions.
How long does Intex spa take to heat up?
I turned on the heater and in about 24 hours the temperature was up to 103, and this was with ambient outdoor air temperature of 35-40 degrees.