What does error 1F mean?
Update (09/11/2020) Ok, if its an LG then here is your answer, The LG error code Er 1F may mean the ice maker blower fan motor is not functioning and could be faulty or there may be a wiring issue with the ice maker blower fan motor.
What does ER co mean on a Kenmore Elite refrigerator?
Parts Needed = Condenser fan motor – Power control board – Wiring harness. Kenmore Refrigerator Error Code = Er CO. Error Condition = Communication error. Repair or Check = Communication error between main board and display board. Parts Needed = Display control board – Power control board – Wiring harness.
How do I fix the ER on my LG refrigerator 1F?
IF or F1 Error CodeUnplug the unit and remove all food and ice from the ice bin.Leave the doors open and wait at least 8 HOURS for the refrigerator to defrost.Make sure to keep towels in and around the unit to soak up any excess water after the frost melts.More items...•
Is there a reset on the Kenmore Elite refrigerator?
To reset the control panel of the Elite, simply turn off the breaker of the refrigerator or unplug it from the power outlet. Plug it back into the power outlet or turn on the breaker again. This resets the control panel.
How do you put a Kenmore Elite refrigerator in diagnostic mode?
Enter the diagnostic mode by pressing and holding the Lock button for 3 seconds, then press and hold the Freezer and Refrigerator buttons while pressing the Acela Ice button 5 times. The digital display will show operating time (number of minutes it's been plugged in).
Where is the evaporator fan on a Kenmore Elite refrigerator?
it's the evaporator fan at the top in the fridge section. The twist is this fan works like a charm if the fridge is turned off and back on again. It works for a few minutes.
What does 1F mean on LG refrigerator?
The LG error code Er 1F may mean the ice maker blower fan motor is not functioning and could be faulty or there may be a wiring issue with the ice maker blower fan motor. The ice maker blower fan is located in the freezer. This fan blows air into the door so the ice cubes stay frozen.
How do I clear the error code on my LG refrigerator?
Unplug the LG fridge and wait 20 minutes – Plug back into power – Many times the code will clear or reset.
Where is the evaporator fan located in a LG refrigerator?
The evaporator fan is located in the back of your freezer section, behind the back cover plate. The easiest way to reach it is by removing that back cover. First, pull out the loose parts. This includes the ice machine bucket, sliding shelves, and any baskets in the section.
How do you reset the compressor on a Kenmore refrigerator?
4 steps to reset a refrigerator compressorUnplug your refrigerator. ... Turn off the refrigerator and freezer from the control panel. ... Reset your freezer and fridge temperature settings. ... Wait for the refrigerator temperature to stabilize.
Why is my Kenmore Elite refrigerator not getting cold?
possible issues That Can Cause Kenmore Elite Refrigerator To Stop Cooling: Evaporator Fan Frosted Over. Damper Control Malfunction. Defrost Thermostat Burnt.
What temperature should my Kenmore Elite refrigerator be set at?
Best Temperature for Kenmore Refrigerators When a Kenmore refrigerator makes its way from the factory to the big box store where it's placed for purchase, it's automatically set at 37 degrees Fahrenheit. This is the ideal temperature for the appliance, according to Consumer Reports.