What does e1 f5 mean on a Whirlpool oven? The error code E1-F5 indicates a door latch switch failure or a door lock motor/solenoid failure. If the door latched: Disconnect power to the range. Check the wires and connections from the control to the door switch, then from the door switch to the control.
How do I clear my E1 F5 Whirlpool oven?
You should disconnect power again for 15 seconds and reconnect and see if that helps. If it doesn't cure the E1- F5 error hold the bake button in until E0- F2 appears in the display. This is the error for a stuck button on the keypad and is the way to clear the memory of the electronic range control.23-Oct-2007
How do I fix F5 error on Whirlpool oven?
Persistent F5 Errors Press and hold any key for one minute to clear the error code, and an F2 code should appear. Press CANCEL and observe the stove for one minute to see if the F5 error reappears. If the error persists, it's time to replace the latch.05-Dec-2021
What does F5 E1 mean on a oven?
The error F5E1 indicates the over door latch is not operating. ... This problem can be a bad door lock switch, motor or control and I recommend a technician check and repair this problem.11-May-2009
How do you clear a Whirlpool oven code?
Reset power to the product:Power unit down by turning off the circuit breaker(s) for one (1) minute.Power unit up by turning on the circuit breaker(s).Start a bake cycle.Monitor the oven for one (1) minute to ensure the error code does not display again.Verify oven operation.
What is F5 on a whirlpool?
The "F5" error means that the temperature sensor has recorded an unusual reading while using hot water. This usually is a sensor error rather than a malfunction of your hot water heater.26-Sept-2017
What is F5 on Whirlpool stove?
F5 - Control Board Failure - Replace control board (clock).
How do you unlock a Whirlpool oven door?
Whirlpool Oven Door is Locked - What Should I Do?Press Cancel/Off key to start a latch reset, wait 20-30 seconds and open door.Turn the power off at the circuit breaker or fuse box for one minute, then turn the power back on.More items...•14-Dec-2019
Why is my Whirlpool oven not heating up?
Defective Whirlpool Oven Bake Element An electric oven not heating up can often be attributed to a defective bake element. ... If the bake element is defective, you may notice burnt spots or even breakage on the metal coil. In these instances, the bake element is defective and should be replaced.
What does E1 F5 mean on Kenmore oven?
The F5/E1 fault code indicates the door locking mechanism is not working. When starting a self cleaning cycle; the door lock motor must operate and lock the door or F5/E1 will display.26-Aug-2012
Is there a reset button on a Whirlpool oven?
Press the "Off/Clear' button for three seconds to turn the "Control Locked" child lock off. Reset the cooking program if "Off/Clear" was pressed accidentally. For example, press the "Defrost" button again, and turn the dial to select the defrost time you want again.27-Aug-2017
How do I find the error code on my Whirlpool oven?
0:112:27Whirlpool Range / Oven - Diagnostics Mode Operation - Stored Error CodesYouTubeStart of suggested clipEnd of suggested clipNow using your arrow key start with the up arrow.MoreNow using your arrow key start with the up arrow.
How do I run a diagnostic on my Whirlpool oven?
Enter Diagnostics mode by pressing CANCEL>CANCEL>START within a 5-second period. Entering Diagnostics mode will cancel any active oven operation. Enter the Diagnostics mode only after the oven is cool. All elements (depending on which cycle is being used) will operate with the oven door open.
Door Locking Error
A Whirlpool Oven displays a F5-E1 error code when a Door Locking Error has been detected by the internal electronic diagnostics.
Whirlpool Oven F5-E1 Error Code Error Code Meaning
The door is not locked 1 minute after the lock (self-clean) function is initiated.
What does F2 mean on a keypad?
F2 followed by E0, E1, E2 or E6 - You either have a shorted keypad, the keypad cable is unplugged or the cancel key line is open.
What to do if you see a Whirlpool error code?
If you see a Whirlpool error code on your oven, range or stove, just give us a call and we’ll tell you what to do. It could be that there’s a very simple fix you can perform yourself. And if not, we can be with you in a flash to repair it. We also offer appliance warranty plans, so if you see an error code on any of your Whirlpool appliances, you won’t have to worry about the repair bill.
