What does AF code mean on Whirlpool dryer?
Your dryer's thermal limiter could save your life. It's a heat-sensitive fuse attached to the blower or the heating element, and it cuts electrical power to the heater when the dryer overheats.
How to repair a whirlpool dryer with a bad timer?
- Tilt the dryer on its face to access vent hole at the bottom of the rear of the dryer.
- Release the hose clamp on the vent hose.
- Place the hose on the vent hole and tighten the clamp.
- Tilt the dryer back in place, plug it in, and run a test load to see if the timer is working as it should.
How to fix Whirlpool dryer F70 error code?
To clear it, try this:
- Check the household fuse/circuit breaker. If you see it (them) blown/tripped, turn off the circuit breaker for about a minute, and then turn it on. ...
- Check the ppower cord and make ssure it is connected properly. ...
- Run a time fry cycle to test the function.
- Monitor the dryer’s work for a couple of minutes to ensure that the code does not appear again.
Why is my Whirlpool dryer not starting?
Why Your Whirlpool Dryer Is Not Starting?
- Solution. Whichever the case, a loose door latch will not let your whirlpool dryer start. ...
- Solution. If you are experienced enough, you can first use a multimeter to check the power connections to confirm the issue.
- Solution. ...
- Solution. ...
- Solution. ...
- Steps of replacing a whirlpool dryer thermal fuse. ...
- Solution. ...
- Solution. ...
- Solution. ...
- Solution. ...
Why does my Whirlpool dryer keep saying AF?
The AF code appears when the dryer is started, clothes are taking too long to dry, and there is excessive lint inside the dryer drum.03-Apr-2020
What do you do when your dryer Says AF?
Try the following:Clean the lint screen.Check to see if the house vent from the dryer to the wall is crushed or kinked.Confirm that the house vent from the dryer to the wall is free of lint and debris.Confirm that the exterior vent exhaust hood is free of lint and debris.More items...•27-Apr-2021
Why does dryer say af?
One such code, the “AF” code, signifies a low-airflow condition.
How do I reset the sensor on my Whirlpool dryer?
If your Whirlpool dryer displays a "PF" error code, indicating a recent power failure, the dryer will need to be reset and restarted. This is done by pressing "Start" for a few seconds to restart the dryer. If the dryer does not restart automatically, select a new cycle and any options then press "Start" to begin.
How do you clear the AF code on a dryer?
An AF (Restricted Air Flow) error code indicates that the lint screen or vent is clogged; the vent may be crushed, kinked or have too many turns. The dryer will continue to run when the is error is present. Touch any key to clear the code from the display and return to the estimated time remaining.29-Apr-2021
What does the code AF mean on a Kenmore dryer?
a restricted air flowThe code AF normally indicates that the control senses a restricted air flow on most models of Kenmore Elite dryers.14-Oct-2016
What does f1 on a Whirlpool dryer mean?
Dryer Repair. If your Whirlpool dryer is displaying an F01 error code, this means there is something wrong with the control board or one of the components connected to it. It is commonly caused by a power failure or after a power surge occurs.02-Aug-2021
How do I reset my Huebsch dryer?
Step-by-Step Programming Instructions:Start with all the DIP switches in the two blocks under the display in the OFF position (down)Press reset button to clear memory.Press button to the left of the display to show start time for the dryer. ... Press button to the left of the display again to turn off the display.28-Jun-2012
Why does my dryer have no heat?
Is your dryer not heating up? Common reasons for an electric or gas dryer not heating are a tripped circuit breaker, clogged vent, and no gas flow. Other potential reasons include a faulty thermal fuse and broken heating element.02-Apr-2019
How do you run a diagnostic on a Whirlpool dryer?
0:112:51Whirlpool, Maytag & Kenmore Dryer - Using Diagnostic ModeYouTubeStart of suggested clipEnd of suggested clipEach button has two separate functions the first button that we pressed if we press it once willMoreEach button has two separate functions the first button that we pressed if we press it once will activate the UI buttons.
How do you clean the moisture sensor on a Whirlpool dryer?
0:272:28Whirlpool/Kenmore Electric Dryer Moisture Sensor #279366 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd rotate the top up remove the mounting screws and pull the lint housing out disconnect the wireMoreAnd rotate the top up remove the mounting screws and pull the lint housing out disconnect the wire attached to the lower terminal of the old moisture sensor use pliers to untwist the upper terminal.